It's a pci card.
Thomas P. Connolly
Senior Development Engineer
Colorado Engineering Experiment Station Inc.
Phone: (970) 897-2711
Fax: (970) 897-2710
Email: [EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]] On Behalf Of Brian
Sent: M
This is exactly my situation, any ideas??
"If his NIC is *not* there when it's time to configure and start
the d-load, it's a hardware/BIOS issue, or somebody's broke
sysinstall(8).or is there another option I'm missing?"
Tom
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL
to do next. What
I'm haring is that I have to install miibus, then I have to edit
/etc/rc.conf. Do I have that right?
Thanks again,
Thomas Connolly
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]] On Behalf Of Kevin D. Kinsey,
DaleCo, S.P.
Sent: Monday, Decembe
Oh yes, and one other thing, can you tell me how to do a device probe?
Thanks again,
Tom Connolly
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]] On Behalf Of Kevin D. Kinsey,
DaleCo, S.P.
Sent: Monday, December 09, 2002 2:07 PM
To: Thomas Connolly; '
, S.P.
Sent: Monday, December 09, 2002 2:07 PM
To: Thomas Connolly; 'Brian'; [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: Re: Ethernet card problem
dc driver uses the miibus code, make sure you have that enabled
on your kernel.
There is nothing needed in "sysinstall", a d
Yes, that is what I tried to do but my interface doesn't come up in the
list, only plip, and com 1 come up, not dc0.
Thanks,
Thomas Connolly
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]] On Behalf Of Brian
Sent: Monday, December 09, 2002 10:45 AM
To: T
Thanks again for the help. Can you tell me how to set my interface up
manually so that it will use DHCP for the ip and netmask, gateway, etc.?
Thanks,
Tom Connolly
-Original Message-
From: D J Hawkey Jr [mailto:[EMAIL PROTECTED]]
Sent: Monday, December 09, 2002 10:25 AM
To: Thomas
I am very new to all this. I basically just
went step-by-step through the FreeBSD manual on installation. There was no
option that said dc(4).
Thanks again,
Thomas P. Connolly
Senior Development Engineer
Colorado Engineering Experiment Station Inc.
Phone: (970) 897-2711
Fax: (970) 897-2710
Hi,
On Mon, Dec 09, 2002 at 09:10:24AM +0100, Didier Wiroth wrote:
> Hey,
>
> (I'm a FreeBSD newbie)
>
> How do you install ports software to a jail as it is not recommended to
> "make and make install" from the ports collection inside the jail?
where have you read that it's not recommended to
I've got my system set up to rotate the maillog every day at midnight.
What do i do if i want to run a command on the logfile just before it's
rotated ?
/thomas
--
Thomas von Hassel
DarX @ irc
darxmac @ AIM/iChat
Powered by inkwell...!
To Unsubscribe: send mail to [EMAIL PROTE
les. Have a look
at
all three (www.exim.org, www.postfix.org, www.qmail.org) and get the
one
that you like best.
or if you like a complete package try out http://www.courier-mta.com
/thomas
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
Hi,
Please include your kernel config.
On Wed, Dec 04, 2002 at 12:37:41PM +0100, Julian Sassenscheidt wrote:
> hello!
>
> i have some problems with compiling a kernel for my freebsd-4.7 system.
> make fails with the following error-message:
>
> if.o: In function `if_setlladdr':
> if.o(.tex
pped it in some nice shell scripts to make
thins easier :)
/thomas
--
Thomas von Hassel
DarX @ irc
darxmac @ AIM/iChat
Powered by inkwell...!
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
diferent ftp clients both getting and putting
the files ...
/thomas
--
Thomas von Hassel
DarX @ irc
darxmac @ AIM/iChat
Powered by inkwell...!
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
Any ideas in re to subject ?
/thomas
--
Thomas von Hassel
DarX @ irc
darxmac @ AIM/iChat
Powered by inkwell...!
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
Hello,
i'm just trying to set up some jails on my master machine. According
to the man page, you have to change daemons from listening to all
local addresses. I have done this for every tcp port that is listed
within the netstat command. But i'm having problems with some daemons
that are listening
acket says: notebook udp port 1020 (number changes!) unreachable! BTW,
gateway function of the server is enabled!
Any Ideas
Thanks,
Thomas
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
Hello all. I am having a problem installing a very large program. It wants
to extract itself to the /tmp directory but there is not enough space. I
have a 30 Gb hard drive that is only 20% full so there is plenty of free
space to work with. I've tried increasing the size of the file system a
t;YES" in /etc/rc.config
and for testing router_enable="YES"
and natd_enable="YES"
Thanks,
Thomas 'Neo' Weber
---
[EMAIL PROTECTED]
[EMAIL PROTECTED]
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
Sorry if there is several copies of this coming through, having some sendmail
problems too.
Hello all. I am having a problem installing a very large program. It wants
to extract itself to the /tmp directory but there is not enough space. I
have a 30 Gb hard drive that is only 20% full so there
The last two lines from dmesg:
IP packet filtering initialized, divert disabled, rule-based forwarding
enabled, default to deny, logging disabled
ip_fw_ctl: invalid command
Well, I've been having the same exact problem as Constatine posted, so when
I got home tonite and looked up the last erro
I don't know if this is the palce to go for help, but here goes.
I have freeb running on a machine with 3 NICS-fxp0, dc0, rl0. I want to
run DHCP on fxp0 and dc0-the LAN side of the network. I wrote the conf
file, and it works for fxp0, but I get an odd error message when I try
to bring up dh
I am having almost the same exact problem. I've followed the guides on
freebsddiary, in the handbook, and instructions here in the list, but I
still can't ping out to the internet from my xp box. I can however ping the
external NIC's IP address though. Maybe someone can post a simplified
rc.fi
I'm using these rules as a template for my firewall config:
http://www.geocrawler.com/archives/3/151/2002/5/0/8814536/
but i cant seen to get get FTP working. (users connecting to outside
ftp servers from the local network)
Any ideas how ?
/thomas
--
Thomas von Hassel
--
Thomas von H
I'm using these rules as a template for my firewall config, but i cant
seen to get get FTP working. (users connecting to outside ftp servers
from the local network)
Any ideas how ?
/thomas
--
Thomas von Hassel
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscri
Where is i can get freebsd to accept longer usernames ?
/thomas
--
Thomas von Hassel
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
Where is it can get freebsd to accept longer usernames ?
/thomas
--
Thomas von Hassel
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
The 'option' value is what did it. Thank you (and Gustaf and Adam) for your
help.
I am running now.
on 11/12/2002 1:33, [EMAIL PROTECTED] wrote:
> On Tue, 2002-11-12 at 09:07, Thomas Kernes wrote:
>> I have FreeBSD 4.6 running on an Intel 815 board with integrated video.
and in the book.
I would appreciate any suggestions.
Thank you.
--
Thomas Kernes
[EMAIL PROTECTED]
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
Hi Gustaf,
On Sun, Nov 10, 2002 at 08:14:18PM +0100, Gustaf Sjoberg wrote:
> Hi,
> what would an entry in syslog.conf look like if i want to send all information on
>sudo attempts to /dev/console? any ideas? ;-)
>
> thanks in anticipation,
> Gustaf Sjoberg
you can do that with syslog-ng. It's i
On Wed, Nov 06, 2002 at 05:59:26PM -0500, Matthew Emmerton wrote:
> > Hi all
> >
> > I am trying to install mod_php4 on my FreeBSD 4.7 server (with Apache
> 2.0.43).
>
> I believe all of the mod_xxx ports are only designed to work properly with
> the Apache 1.3.x family of web servers.
>
Doesn't
On Wed, Nov 06, 2002 at 04:18:55PM -0500, Alvaro Rosales R. wrote:
> Hi fellows Im trying to setup natd on my FreeBDS 4.5 box, And I want to test my
>clients I
> have starte natd an put the open parameter on the firwall flags., but when I ping an
> internet address from my client (my client has
On Tue, Nov 05, 2002 at 10:09:16AM +0100, Jonas Sonntag wrote:
> hi list
>
> i'm looking for a little advice here.
> i've got a fbsd server conected to the internet via rl0. there are about 30
> workstation in 192.168, fbsd does nat for, those are connected via rl1.
> now, on rl1, behind nat there
CAM on the RELENG_4
branch a few minutes ago.
Thomas.
--
[EMAIL PROTECTED]
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
On Wed, Oct 30, 2002 at 03:26:11PM +0100, Erik Mattsson wrote:
> Hi
>
> Ive installed the apache-1.3.26_3 port and trying to get it to work with TWiki
> (an intranet discussion/note board). But I cant limit the access of the sites.
>
> Ive made the following test:
> created a "test" dir in the Do
llows the use of the standard SCSI disk, CD-ROM and
tape drivers for ATAPI devices as well as SCSI devices, instead of
the alternative acd, ast and afd drivers.
Thomas.
--
[EMAIL PROTECTED]
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
Hi,
since upgrading to 4.7-STABLE, java (means java, javac) runs only as
root.
I've tested it with linux-sun-jdk1.4.1_01, linux-sun-jdk1.4.0 and
linux-blackdown-jdk1.4.1, always i'm getting this message:
----
Le 2002-10-29, TooMany Mirrors écrivait :
> to make music cds from OGGs/MP3s. I found the site
> http://www.cuivre.fr.eu.org/~thomas/atapicam/
> and got the patches, but I'm honestly not sure how to use them and I want
If you are not at ease with the process of patching, r
that I don't have to reboot.
Thanks for helpful hints,
Thomas
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
ng without this problem.
I've rebuild the entire gcc3.0, but i get the same error.
Any ideas?
Thomas 'Neo' Weber
---
[EMAIL PROTECTED]
[EMAIL PROTECTED]
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
Here Here! Good suggestion!
-Original Message-
From: David Banning [mailto:david@;skytrackercanada.com]
Sent: Wednesday, October 23, 2002 9:18 PM
To: JoeB
Cc: Moti Levy; [EMAIL PROTECTED]
Subject: Re: server reboot's on it's own.
On Wed, Oct 23, 2002 at 08:10:38PM -0400, JoeB wrote:
> R
On Thu, Oct 17, 2002 at 11:15:24AM -0700, Charles Henrich wrote:
> I have a network/firewall where I want to nat an entire network. However, I
> also want nat traffic to one remote host in particular out on the internet to
> be IPsec'd as well.
>
> [A] (10.x) [B] (Nat) [C] (Real IP)
>
> I've set
Nope! You stuck here. he he.
-Original Message-
From: ABDALLAH Faycal [mailto:faycal.abdallah@;cegetel.fr]
Sent: Thursday, October 17, 2002 7:39 AM
To: '[EMAIL PROTECTED]'
Subject: unsubscribe
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the b
Thanks Kent,
I'm not sure what the problem was but I upgraded my kernel to FreeBSD
4.7 and now everything seems to be working correctly.
-Original Message-
From: Kent Stewart [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, October 16, 2002 7:22 PM
To: Thomas Connolly
Cc: FreeBSD Ques
On Thu, Oct 17, 2002 at 01:24:43AM -0700, J. Foobar wrote:
> I have been unable to get X to start successfully.
> Hopefully I am overlooking something stupid.
>
> FreeBSD 4.6.2 on an Intel machine
>
> My graphics card is an Intel 82845G/GL. I searched
> for info on the Intel site and it mention
I'm trying to install KDevelop on my system and it requires qt23. There
seems to be an issue with the makefile for that build. I've heard there
was a patch. Does anyone know where I can get this patch. I have qt30
already installed, will they work side-byside? Has anyone successfully
installe
How do I change the name of my email from Charlie Root?
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
over all ports on the hub. I'm leaning towards
a problem with the tcp settings between the two machines, but have about
reached the limits of my knowledge in this area. Any pointers to where to
look would be great. I can pass on more information if needed (sysctls,
tcpdump, etc.).
TIA,
y Box: FreeBSD 4.7-STABLE
Thanx
Thomas
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
read, tha LC_TIME is a link to
itself, but i don't know wich file to edit to avoid this.
Thomas 'Neo' Weber
---
[EMAIL PROTECTED]
[EMAIL PROTECTED]
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
gateway and dns
-- Original Message --
From: "D. Penev" <[EMAIL PROTECTED]>
Date: Wed, 9 Oct 2002 21:06:36 +0300
On Wed, Oct 09, 2002 at 12:00:25AM -0400, 2005 - Chill, Samuel Thomas wrote:
>Date: Wed, 9 Oct 2002 00:00:25 -0400
>From: "2005
ame_ports yes
unregistered_only
------ Original Message --
From: Nick Rogness <[EMAIL PROTECTED]>
Date: Tue, 8 Oct 2002 15:38:00 -0600 (MDT)
On Tue, 8 Oct 2002, 2005 - Chill, Samuel Thomas wrote:
> I have ipfirewall, ipdivert, and dummynet all compiled int
I have ipfirewall, ipdivert, and dummynet all compiled into my kernel. I am able to
run run natd and to specify rules with ipfw, i can also ping my external interface. My
internal network card (rl1) is 10.0.0.1 and my lan clients are running on 10.0.0.x. I
can ping everything, the network is se
Uhm -- the ports tree.
# (cd /usr/ports/devel/kdevelop && make all install clean)
Tom Veldhouse
- Original Message -
From: "alireza mahini" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, October 08, 2002 2:07 PM
Subject: How do i install the Kdevelop?
> I am downloading K
Oh yes -- we can not forget Emacs. Not my preference, but some have devoted
their lives to it.
Tom Veldhouse
- Original Message -
From: "Adam Weinberger" <[EMAIL PROTECTED]>
To: "alireza mahini" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Tuesday, October 08, 2002 2:03 PM
Subject:
KDevelop is the one I tend to use. You could try Eclipse as well. I
believe there is a C++ plugin for it.
Tom Veldhouse
- Original Message -
From: "alireza mahini" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, October 08, 2002 1:49 PM
Subject: What is the best IDE for C++p
It is for name caching. It is supplied as part of the GNU C library.
isc-bind fills the role nicely.
Tom Veldhouse
- Original Message -
From: "Kris Kennaway" <[EMAIL PROTECTED]>
To: "Steven Garrett" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Tuesday, October 08, 2002 12:40 PM
Sub
mp; make -DWITH_SSL all install clean)
# (cd /usr/ports/www/mod_php4 && make all install clean)
Tom Veldhouse
- Original Message -
From: "Wesley Morgan" <[EMAIL PROTECTED]>
To: "Thomas T. Veldhouse" <[EMAIL PROTECTED]>
Cc: "Jeff MacDonald&qu
Actually, the problem occurs when you build in IMAP-SSL. It has not worked
for a very long time. I am not entirely sure why, as I have not had a large
enough need to look into it.
Tom Veldhouse
- Original Message -
From: "Wesley Morgan" <[EMAIL PROTECTED]>
To: "Jeff MacDonald" <[EMAIL
Don't chose the IMAP-SSL option. It has been broken for years and years
Tom Veldhouse
- Original Message -
From: "Jeff MacDonald" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, October 08, 2002 10:22 AM
Subject: php4 apache 2
> I installed apache2 and php4 from ports,
Why would you want to do that? I can think of no reason to use both other
than some of the supplemental features of ipfw like bandwidth shaping.
Tom Veldhouse
- Original Message -
From: "ksrgyn -" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, October 07, 2002 3:58 PM
Subject
You an also change your default protocol to ssh 2 rather than ssh 1 (so that
it tries using ssh 2 first).
For freebsd-security: Why is the default still ssh 1?
Tom Veldhouse
- Original Message -
From: "Roman Neuhauser" <[EMAIL PROTECTED]>
To: "Martin Moeller" <[EMAIL PROTECTED]>
Cc: "F
First, did you start your server with SSL? Second, unless you want php to
run ONLY with SSL, I would move it out of that block so that it will start
anytime. Lastly, make sure you have the following in your config.
[...]
DirectoryIndex index.php index.html
[...]
AddType application/x-httpd-php
Depending on the use perhaps (I am not sure there is a working hot swapable
IDE raid solution for FreeBSD), but most can probably get by with it. Of
more concern is that FreeBSD 5.0 is going to be used. Don't use that! It
is not stable yet.
Tom Veldhouse
- Original Message -
From: "St
I am a Postgresql person myself. I can say there is one bad thing about
Postgres that might be annoying to some. When data is deleted, the disk
space is not recovered until a manual "vacuum" takes place. On a high load
system with many updates or deletes, this could be a real headache. A cron
On Mon, Sep 30, 2002 at 02:52:47AM -0700, OCTAVIAN HORNOIU wrote:
> Are the TX2000 and SX4000 cards supported under FreeBSD 4.62 or do I have to
> wait for the 4.7 release to purchase them?
>
>
> Thanks for your answers ahead of time!
Hi,
read http://www.freebsd.org/releases/index.html about
Hello,
> >instead of tag=RELENG_4_6_2, make it
> >tag=RELENG_4
> >
> >RELENG_4 is the tag for -STABLE. it'll currently get you 4.7-RC.
>
> I know, but I don't want Stable, I want RELENG_4_6_2
>
> br
> socketd
Please read the handbook, this procedure is explained very clearly.
If you use a wron
hope that all the dependencies have been updated too.
>
> They have. I waited quite a long time before removing pspell.
www/mod_php4 is missing: see PR ports/42052.
--
Th. Thomas.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
Thank you.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
Hello,
I'm a newbie and I can't seem to get my X Server working with any other
users besides root. This is probably a permissions issue. Can someone
offer some help here?
Thanks,
Tom
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
Yes, I haved tried both "SysMouse" and "MouseSystems" both and neither seem
to work. I've even tried several different ps/2 mice and I get the same
weirdness.
Tom
-Original Message-
From: Branko Mejak [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 23, 200
in XF86Config:
Option "Device" "/dev/psm0
Option "Device" "/dev/mouse
Option "Protocol" "PS/2"
I have been through the FreeBSD Handbook and the Xfree86 documentation but I
have found nothing. Has anyone had a similar problem who can offer some
adv
I could be mistaken about this but I believe that the *RC2 is the
mini-install version. I'm not sure about the differences but I would go
with the full set. If you don't need all the port binaries and extras, CD
#1 from the 4 CD set should be sufficient.
Tom
-Original Message-
From:
says that it is
supported using the Savage server. So my question is, is there some way to
change the server to the Savage server? If so, could someone explain it to
me like I was 2 years old please?
Thanks in Advance,
Thomas Connolly
To Unsubscribe: send mail to [EMAIL PROTECTED]
with &q
Just curious - because of the resolver bug, every _single_ FreeBSD
installation that now occurs has to be accompanied by a cvsup to -stable,
etc.
Not that this is so bad, but why require every single person - from new to
the OS to veteran - to cvsup just to have a usable system ?
It seems to me
Hello,
I have a system running a few jails, and the filesystems for these jails
are on `vn` file-backed filesystems.
I want the root user _inside_ the jail to be able to specify and use
quotas for directories/users also _inside_ the jail.
Is this possible ? I cannot get it to work, and I am w
1001 - 1076 of 1076 matches
Mail list logo
