Hello,
I ran into a problem when updating ports on 8.1-RELEASE (i386).
~/print/latex-cjk doesn't want to build.
=== Patching for latex-cjk-4.8.2_4
=== Applying FreeBSD patches for latex-cjk-4.8.2_4
Ignoring previously applied (or reversed) patch.
1 out of 1 hunks ignored--saving rejects
Hello Fred,
Fred f...@blakemfg.com writes:
I ran into a problem when updating ports on 8.1-RELEASE (i386).
~/print/latex-cjk doesn't want to build.
=== Patching for latex-cjk-4.8.2_4
=== Applying FreeBSD patches for latex-cjk-4.8.2_4
Ignoring previously applied (or reversed) patch.
1 out
no more time to work on it
tonight. I will try again tomorrow.
Best regards,
Fred
On 04/25/11 07:29, Frédéric Perrin wrote:
Hello Fred,
Fredf...@blakemfg.com writes:
I ran into a problem when updating ports on 8.1-RELEASE (i386).
~/print/latex-cjk doesn't want to build.
=== Patching
Good morning,
I have a small server with an SSD drive in it that is having some problems.
Notably, dmesg has been repeatedly reporting the following error message:
g_vfs_done():ad0s1a[READ(offset=-574217714356717568,
length=16384)]error = 5
I realize that the best course of action is
Hello
I have a freebsd7 box. I also have another PC . I removed the disk from
freebsd installed machine and fixed it to the another PC.
It Works but there is a problem.
While opening the server it waits at boot
FreeBSD/i386 boot:
Default:0:ad(0,a)/boot/loader
Boot:
If I press enter
On Thu, 21 Apr 2011, Yavuz Maşlak wrote:
I have a freebsd7 box. I also have another PC . I removed the disk from
freebsd installed machine and fixed it to the another PC.
How is it connected? USB?
It Works but there is a problem.
While opening the server it waits at boot
FreeBSD/i386
far above, and could be
inside any of these other modules:
sfx2
please re-run build inside each one to isolate the problem.
---
/usr/local/bin/bash
cd /var/XXX/libreoffice-build-3.3.2.2/build/libreoffice
source
.
How is it connected? USB?
It Works but there is a problem.
While opening the server it waits at boot
FreeBSD/i386 boot:
Default:0:ad(0,a)/boot/loader
Boot:
If I press enter, the server opens and it Works.
How can I get rid off this ?
Adding kern.cam.boot_delay=1 to /boot
On 04/19/2011 11:35 AM, H.Erkin ATAK wrote:
I am running freebsd 8.2 on virtualbox on an ubuntu machine.
I am running gnome and have network access no problem.
But I can not add any packages via pkg_add.
It gives can not fetch ftp address.
I tried different mirrors but it did not work
to isolate the problem.
---
/usr/local/bin/bash
cd /var/XXX/libreoffice-build-3.3.2.2/build/libreoffice
source ./FreeBSDX86Env.Set.sh
cd pyuno
build
when the problem is isolated and fixed exit and re-run 'make' from the top-level
I am running freebsd 8.2 on virtualbox on an ubuntu machine.
I am running gnome and have network access no problem.
But I can not add any packages via pkg_add.
It gives can not fetch ftp address.
I tried different mirrors but it did not work.
Please help me
On 19 April 2011 09:35, H.Erkin ATAK erkin.a...@gmail.com wrote:
I am running freebsd 8.2 on virtualbox on an ubuntu machine.
I am running gnome and have network access no problem.
But I can not add any packages via pkg_add.
It gives can not fetch ftp address.
I tried different mirrors
El día Tuesday, April 19, 2011 a las 11:35:47AM +0300, H.Erkin ATAK escribió:
I am running freebsd 8.2 on virtualbox on an ubuntu machine.
I am running gnome and have network access no problem.
what does this mean 'have network access' exactly?
But I can not add any packages via pkg_add
# Perform daily/weekly/monthly maintenance.
1 3 * * * rootperiodic daily
15 4 * * 6 rootperiodic weekly
30 5 1 * * rootperiodic monthly
Is there will be monthly maintance for febrary?
--
С
On Apr 19, 2011, at 12:03 PM, Коньков Евгений wrote:
# Perform daily/weekly/monthly maintenance.
1 3 * * * rootperiodic daily
15 4 * * 6 rootperiodic weekly
30 5 1 * * rootperiodic monthly
Is
Your firewall may be the problem.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Hi All,
I went back to a machine today that I think I had partially got samba 3.5
installed on, I need to get krb5 on so I can add the system to my AD domain.
Clearly on my previous attempt I got something wrong, but I am not overly sure
how to go about fixing this problem below, I don't need
On Sun, 10 Apr 2011, Michael D. Norwick wrote:
surprised this afternoon when, while the installation of gnome2 was working,
I think it was building GCC 4.4 and friends, the HP 2010i LCD monitor I use
on the machine appeared to lose the input to its DVI port. The HD activity
light was still
On 04/10/11 06:44, Warren Block wrote:
On Sun, 10 Apr 2011, Michael D. Norwick wrote:
surprised this afternoon when, while the installation of gnome2 was
working, I think it was building GCC 4.4 and friends, the HP 2010i
LCD monitor I use on the machine appeared to lose the input to its
DVI
Hi Dino,
It looks to me like you don't want to FreeBSD's expr (pretty much like
me). You probably want to install the GNU version, which I think is
available in the coreutils port.
Let me know if this helps.
Regards
Manish Jain
___
anything. The keyboard
was active as the Caps-Lock and Num-Lock lights worked.
The monitor power save features are disabled.
Maybe xscreensaver? Whatever's causing it, it's not a common problem.
I wonder if the Linux Catalyst Control Center app. from ATI would work under
VirtualBox-OSE
Good Day;
I am in the final steps of completing a fresh installation of FreeBSD
8.2 on a workstation with a DFI LanParty motherboard, AMD Athlon 64
processor, 3 GB of ram, an ATI Radeon x2900 graphics card, and root on
ZFS filesystem. Using ports.tar.gz downloaded, and src CVSup'd this
Hi,
I'm trying to fetch portsnap but can't because probably of network problem.
Whenever I try to run command
# portsnap fetch extract
the process stall and never reach 20%. It is sad. :(
The computer on wich I try to run this command is on my home LAN
that has a gateway/router.
What can I
On 03/04/2011 14:45, Paul Chany wrote:
I'm trying to fetch portsnap but can't because probably of network problem.
Whenever I try to run command
# portsnap fetch extract
the process stall and never reach 20%. It is sad. :(
The computer on wich I try to run this command is on my home LAN
2011-04-03 16:19 keltezéssel, Matthew Seaman írta:
On 03/04/2011 14:45, Paul Chany wrote:
I'm trying to fetch portsnap but can't because probably of network problem.
Whenever I try to run command
# portsnap fetch extract
the process stall and never reach 20%. It is sad. :(
The computer
2011-04-03 18:35 keltezéssel, Paul Chany írta:
2011-04-03 16:19 keltezéssel, Matthew Seaman írta:
On 03/04/2011 14:45, Paul Chany wrote:
I'm trying to fetch portsnap but can't because probably of network
problem.
Whenever I try to run command
# portsnap fetch extract
the process stall
2011-04-03 16:19 keltezéssel, Matthew Seaman írta:
On 03/04/2011 14:45, Paul Chany wrote:
I'm trying to fetch portsnap but can't because probably of network problem.
Whenever I try to run command
# portsnap fetch extract
the process stall and never reach 20%. It is sad. :(
The computer
2011-04-03 16:19 keltezéssel, Matthew Seaman írta:
On 03/04/2011 14:45, Paul Chany wrote:
I'm trying to fetch portsnap but can't because probably of network problem.
Whenever I try to run command
# portsnap fetch extract
the process stall and never reach 20%. It is sad. :(
The computer
Hi,
I did an upgrade from FreeBSD 8.1 to 8.2 today. All OK so far, except for
Apache (apache-2.2.17_1)
It wouldn't start.
/var/log/httpd-error.log
[Wed Mar 23 13:04:26 2011] [error] Server should be SSL-aware but has no
certificate configured [Hint: SSLCertificateFile] ((null):0)
I dit not
Don't border,
i found the error, nothing to with freebsd. sorry
2011/3/23 n dhert ndhert...@gmail.com
Hi,
I did an upgrade from FreeBSD 8.1 to 8.2 today. All OK so far, except for
Apache (apache-2.2.17_1)
It wouldn't start.
/var/log/httpd-error.log
[Wed Mar 23 13:04:26 2011] [error]
]
Verzonden: vrijdag 18 maart 2011 20:14
Aan: Schaft van der, D (Danny); freebsd-questions@freebsd.org
Onderwerp: Re: sguil-client startup problem
--On March 17, 2011 4:30:31 PM +0100 d.sch...@rn.rabobank.nl wrote:
I have a question regarding the installation and startup of sguil-client
on a 8.2
on the
system, could that be a problem. Hopefully , there is someone who has
experienced the same or better yet, has an answer to my problem...
Apparently the default tcl install is now 8.5. Looks like I'm going to
have to update the ports.
You *may* be able to fix your problem by editing
Exec /usr/local/bin/wish8.4 $0 $@ line 5.
I have all the required packages , I suppose
(tclX-8.4,tcl-8.4,tcllib,tcltls,tk8.4,ictl-3), also the iwidget extension is
installed...
Strangely enough also version 8.5 is present on the system, could that be a
problem.
Hopefully , there is someone who
I have a server that I just put together to work with image creation.
Its running lighttpd with php being handled by php-fpm all from ports
running 8.2 amd64.
My problem is quite strange; a simple php script reading in a djvu file
(via Imagick()) causes php to hang and not do anything
Hello list
Trying to build a server for diskless clients but it fails with this
cd /usr/src/etc/sendmail; make distribution
install -o root -g wheel -m 644 /usr/src/etc/sendmail/freebsd.mc
freebsd.cf /usr/home/bernt/disk2/diskless/etc/mail
install: freebsd.cf: No such file or directory
***
Out of the clear, I can no longer start named from /etc/rc.d/named
start. The only error message that I get is in log/messages
Mar 7 17:13:59 unixmania named[99841]: starting BIND 9.4.-ESV-R4 -u
bind -4 -t /var/named -u bind
Mar 7 17:14:00 unixmania named[99841]: could not configure root hints
Jan 26 04:33:51 CST 2011
Thanks,
ed
Unfortunately, I don't have any answers to this problem. I only
know that the same thing happened to me when I tried to upgrade
from the older, no-longer-supported bind9-3
[My solution was to reinstall the older bind9
wrote an article for this, but unfortunatelly
is in Greek... The article is here:
http://www.freebsdworld.gr/node/38#zpool_cache
Besides the problem that you will not understand what I write (:)) you can
follow the commands. You will probably understand what's happening there. Just
skip the part
#zpool_cache
Besides the problem that you will not understand what I write (:)) you can
follow the commands. You will probably understand what's happening there. Just
skip the part that I cange the names of the gpt partitions (the one that I
have a bunch of gpart modify commands)
I hope
I'm installing 8.2 on a server using the instructions for ZFS root
filesystem (http://wiki.freebsd.org/RootOnZFS/GPTZFSBoot), and when I
reboot after installing, it says:
Root mount waiting for: usbus4
followed by:
ROOT MOUNT ERROR
When I did the initial install, I booted using a CD, and then
On 27 February 2011 21:29, Scott Ballantyne boyva...@gmail.com wrote:
On Sun, Feb 27, 2011 at 4:04 PM, Adam Vande More amvandem...@gmail.comwrote:
On Sun, Feb 27, 2011 at 2:36 PM, Scott Ballantyne boyva...@gmail.comwrote:
===sys/boot/i386/zfsloader (install)
cp zfsloader.sym zfsloader.bin
Hi,
Doing a source upgrade from 8.1-8.2, all went well up to the installworld
step:
Reboot into single user mode:
mount -u ./
zfs mount -a
cd /usr/src
make installworld
It goes fine up to this point: (copying by hand)
===sys/boot/i386/zfsloader (install)
cp zfsloader.sym zfsloader.bin
On Sun, Feb 27, 2011 at 2:36 PM, Scott Ballantyne boyva...@gmail.comwrote:
===sys/boot/i386/zfsloader (install)
cp zfsloader.sym zfsloader.bin
cp:No such file or directory
*** Error code 1
Stop in /usr/src/sys/boot/i386/zfsloader
*** Error code 1
Stop in /usr/src/sys/boot/i386
Any
On Sun, Feb 27, 2011 at 4:04 PM, Adam Vande More amvandem...@gmail.comwrote:
On Sun, Feb 27, 2011 at 2:36 PM, Scott Ballantyne boyva...@gmail.comwrote:
===sys/boot/i386/zfsloader (install)
cp zfsloader.sym zfsloader.bin
cp:No such file or directory
*** Error code 1
Stop in
On Mon, Feb 21, 2011 at 8:37 PM, Jim Trigg jtr...@spamcop.net wrote:
I do an installation from DVD on AMD64, and when I reboot it hangs
before displaying anything from the standard boot loader. How can I
debug this?
I found my problem by accident -- I had a badly formatted USB stick
connected
On Mon, 21 Feb 2011 01:29 +, RW rwmailli...@googlemail.com wrote:
I found a recipe for converting flac to mp3:
flac -cd in.flac | lame -h - out.mp3
and I thought I might be able to able to combine multiple flac files
into a single mp3 file with something like the following:
(
I do an installation from DVD on AMD64, and when I reboot it hangs
before displaying anything from the standard boot loader. How can I
debug this?
Thanks,
Jim Trigg
___
freebsd-questions@freebsd.org mailing list
I found a recipe for converting flac to mp3:
flac -cd in.flac | lame -h - out.mp3
and I thought I might be able to able to combine multiple flac files
into a single mp3 file with something like the following:
( flac -cd file1.flac ; flac -cd file2.flac ) | lame -h - both.mp3
but in
Hello
Maybe someone can explain this. My localtime zone is Europe/Zurich (same
as Berlin, Madrid, it's CET).
IMHO this is an equivalent of UTC+1
Lets try this on my shell. The Systemclock is set to UTC:
thomas@bert:~ date
Wed Feb 16 09:12:00 UTC 2011
Set localtime:
thomas@bert:~ setenv TZ
Dear Sir:
I learning the freebsd 8.1, I installed many times with 8.1, but the result
always you may also user sysinstall(8) the installation and **
what can i do, ?
newer just on the load
___
freebsd-questions@freebsd.org mailing
There is installation information on freebsdchina.org which may assist you.
去freebsdchina.org上面去看一下,有安装文档的。
On Wed, Feb 16, 2011 at 1:29 PM, zhong song samzhong2...@yahoo.com wrote:
Dear Sir:
I learning the freebsd 8.1, I installed many times with 8.1, but the result
always you may also user
I'm writing a C program which, for various reasons, has the
warning level turned _way_ up.
I'm now getting this:
/usr/include/readline/readline.h:336: warning: redundant redeclaration of
'rl_make_bare_keymap'
/usr/include/readline/keymaps.h:74: warning: previous declaration of
Quoth Robert Huff on Sunday, 13 February 2011:
I'm writing a C program which, for various reasons, has the
warning level turned _way_ up.
I'm now getting this:
/usr/include/readline/readline.h:336: warning: redundant redeclaration of
'rl_make_bare_keymap'
Chip Camden writes:
I'm writing a C program which, for various reasons, has the
warning level turned _way_ up.
I'm now getting this:
/usr/include/readline/readline.h:336: warning: redundant redeclaration of
'rl_make_bare_keymap'
/usr/include/readline/keymaps.h:74:
Quoth Robert Huff on Sunday, 13 February 2011:
Chip Camden writes:
I'm writing a C program which, for various reasons, has the
warning level turned _way_ up.
I'm now getting this:
/usr/include/readline/readline.h:336: warning: redundant redeclaration
of
From owner-freebsd-questi...@freebsd.org Sun Feb 13 17:00:08 2011
From: Robert Huff roberth...@rcn.com
Date: Sun, 13 Feb 2011 17:56:12 -0500
To: Chip Camden sterl...@camdensoftware.com
Cc: questi...@freebsd.org
Subject: Re: problem when including readline.h
Chip Camden writes:
I'm
On 02/06/11 19:36, b. f. wrote:
Fred Boatwright wrote:
On 02/06/11 00:53, b. f. wrote:
Fred Boatwright wrote:
After updating all ports on 8.1-RELEASE, nedit has a problem. The right
mouse button works ok in the toolbar but if it is pressed in the text
area, for example to copy a block
On 02/06/11 00:53, b. f. wrote:
Fred Boatwright wrote:
After updating all ports on 8.1-RELEASE, nedit has a problem. The right
mouse button works ok in the toolbar but if it is pressed in the text
area, for example to copy a block of text, the cursor changes shape and
the X session becomes
On 02/06/11 00:53, b. f. wrote:
Fred Boatwright wrote:
After updating all ports on 8.1-RELEASE, nedit has a problem. The right
mouse button works ok in the toolbar but if it is pressed in the text
area, for example to copy a block of text, the cursor changes shape and
the X session becomes
Fred Boatwright wrote:
On 02/06/11 00:53, b. f. wrote:
Fred Boatwright wrote:
After updating all ports on 8.1-RELEASE, nedit has a problem. The right
mouse button works ok in the toolbar but if it is pressed in the text
area, for example to copy a block of text, the cursor changes
Hello,
After updating all ports on 8.1-RELEASE, nedit has a problem. The right
mouse button works ok in the toolbar but if it is pressed in the text
area, for example to copy a block of text, the cursor changes shape and
the X session becomes completely locked up. I have to stop X and
restart
On Sat, 05 Feb 2011 14:33:50 -0700, Fred Boatwright f...@blakemfg.com wrote:
Hello,
After updating all ports on 8.1-RELEASE, nedit has a problem. The right
mouse button works ok in the toolbar but if it is pressed in the text
area, for example to copy a block of text, the cursor changes
Fred Boatwright wrote:
After updating all ports on 8.1-RELEASE, nedit has a problem. The right
mouse button works ok in the toolbar but if it is pressed in the text
area, for example to copy a block of text, the cursor changes shape and
the X session becomes completely locked up. I have
lookups).
So. Could this be problem in my configs or is this because of something
wrong at the isp side?
It does look as though there is something a little odd with your
configs. It's difficult to be more specific because you've given very
little information.
If things at the router (whether
ran it with -n as I think in this case the raw IPv6 addresses are
more informative than the rDNS lookups).
So. Could this be problem in my configs or is this because of something
wrong at the isp side?
It does look as though there is something a little odd with your
configs. It's difficult
for a long time.
But I don't understand why is freebsd-update going to update
FreeBSD ota2.cellnetrix.com 7.3-RELEASE-p4 FreeBSD 7.3-RELEASE-p4
to
The following files will be updated as part of updating to
7.3-RELEASE-p4:...
Ah, I see the problem now.
The only thing I can think
byte packets
1 2001:14b8:10:402:2::1 2026.908 ms !A 2999.587 ms !A 3000.423 ms !A
So. Could this be problem in my configs or is this because of something
wrong at the isp side?
--
pepe
___
freebsd-questions@freebsd.org mailing list
http
was the one I had to
manually delete earlier when making clean for graphics/poppler. Since
this directory was not recreated (coupled with the fact that it wasn't
removed via make deinstall) indicates there may be a problem with the
packing list of graphics/poppler.
I found the missing include files
On Fri, 28 Jan 2011, William Bulley wrote:
So something is clearly wrong here. The /var/db/ports/poppler/OPTIONS
file had:
WITHOUT_CAIRO=yes
inside, so I changed that to WITH_CAIRO=yes and repeated the above steps.
The file /usr/local/libdata/pkgconfig/poppler-cairo.pc is now there!
The
Konstantin Vasilyev wrote:
Hi all!
I have installed
%uname -a
FreeBSD ota2.cellnetrix.com 7.3-RELEASE-p4 FreeBSD 7.3-RELEASE-p4 #3:
Tue Jan 25 19:19:34 MSK 2011
kvasi...@ota2.cellnetrix.com:/usr/obj/usr/src/sys/GENERIC i386
I have
@dailyfreebsd-update cron
in root's
I know about how freedsd-update work.
I use for a long time.
But I don't understand why is freebsd-update going to update
FreeBSD ota2.cellnetrix.com 7.3-RELEASE-p4 FreeBSD 7.3-RELEASE-p4
to
The following files will be updated as part of updating to 7.3-RELEASE-p4:...
--
With best regards,
-RELEASE-p4:...
Ah, I see the problem now.
The only thing I can think of is that your kernel and world might be out
of sync, but if you're used to freebsd-update that seems unlikely.
What's the output of 'freebsd-update IDS' ? I've had luck running that
to see what freebsd-update thinks is going
-update going to update
FreeBSD ota2.cellnetrix.com 7.3-RELEASE-p4 FreeBSD 7.3-RELEASE-p4
to
The following files will be updated as part of updating to
7.3-RELEASE-p4:...
Ah, I see the problem now.
The only thing I can think of is that your kernel and world might be out
of sync
William Bulley w...@umich.edu writes:
Everything up to this point builds okay. Then this happens:
Making all in common
gmake[3]: Entering directory
`/usr/ports/graphics/gimp-app/work/gimp-2.6.11/plug-ins/common'
cc -DHAVE_CONFIG_H -I. -I../.. -I../.. -D_THREAD_SAFE -D_REENTRANT
According to Lowell Gilbert freebsd-questions-lo...@be-well.ilk.org on Thu,
01/27/11 at 11:04:
William Bulley w...@umich.edu writes:
Everything up to this point builds okay. Then this happens:
Making all in common
gmake[3]: Entering directory
On 27/01/2011 17:22, William Bulley wrote:
According to Lowell Gilbertfreebsd-questions-lo...@be-well.ilk.org on Thu,
01/27/11 at 11:04:
William Bulleyw...@umich.edu writes:
Everything up to this point builds okay. Then this happens:
Making all in common
gmake[3]: Entering directory
According to David Demelier demelier.da...@gmail.com on Thu, 01/27/11 at
11:39:
It seems that gmake does not call `pkg-config --libs --cflags poppler`.
do you have pkg-config and poppler installed correctly?
/usr/local/libdata/pkgconfig/poppler-cairo.pc
On Thu, Jan 27, 2011 at 11:55 AM, William Bulley w...@umich.edu wrote:
You mention gmake, yet I use # make install all the time. Is this
really gmake under the covers? I see both executables and they differ:
gmake is GNU Make, some applications don't talk nice w/ bsdmake ('make' on
your bsd
According to Chris Brennan xa...@xaerolimit.net on Thu, 01/27/11 at 12:03:
gmake is GNU Make, some applications don't talk nice w/ bsdmake ('make' on
your bsd system). If your installing GIMP from ports then you should be
correctly using something like 'make install clean'. The only time I've
On Thu, 27 Jan 2011, William Bulley wrote:
According to David Demelier demelier.da...@gmail.com on Thu, 01/27/11 at
11:39:
It seems that gmake does not call `pkg-config --libs --cflags poppler`.
do you have pkg-config and poppler installed correctly?
Everything up to this point builds okay. Then this happens:
Making all in common
gmake[3]: Entering directory
`/usr/ports/graphics/gimp-app/work/gimp-2.6.11/plug-ins/common'
cc -DHAVE_CONFIG_H -I. -I../.. -I../.. -D_THREAD_SAFE -D_REENTRANT
-I/usr/local/include/gtk-2.0
Hi all!
I have installed
%uname -a
FreeBSD ota2.cellnetrix.com 7.3-RELEASE-p4 FreeBSD 7.3-RELEASE-p4 #3:
Tue Jan 25 19:19:34 MSK 2011
kvasi...@ota2.cellnetrix.com:/usr/obj/usr/src/sys/GENERIC i386
I have
@daily freebsd-update cron
in root's crontab.
Why does freebsd-update mail me the
Hi,
Thanks for your reply. I compiled them after doing a portsnap fetch
extract again today but the problem still persists. The problem
exists also in the 7.3-release both 32-bit and 64-bit architectures.
Do you think I shall test CURRENT (devel) version and report the bug
if it is still
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 1/21/11 1:59 PM, Chris Brennan wrote:
On Fri, Jan 21, 2011 at 11:02 AM, Greg Larkin glar...@freebsd.org wrote:
Hi Chris,
Please post some compiler output with the error message here, and that
might help someone troubleshoot the problem.
I
Hi FreeBSD people all over the world,
I've installed FreeBSD 8.1 on a system which has ATI Radeon 4350 (I
tried both 32bit and 64bit architectures, in both situations the
problem persists). After enabling HALD and DBUS my system runs X
Window System (GNOME, ...) very well without any problem
Hi,
I had similar problems wiht my ATI 3450 card and in addition to that
random freezes of X. After building the driver directly from the source
(stable branch) the problems where gone.
http://www.x.org/wiki/radeonBuildHowTo
Regards,
Jens
--
23. Hartung 2011, 17:51
Homepage :
On Sun, 23 Jan 2011, Bahman Kahinpour wrote:
Hi FreeBSD people all over the world,
I've installed FreeBSD 8.1 on a system which has ATI Radeon 4350 (I
tried both 32bit and 64bit architectures, in both situations the
problem persists). After enabling HALD and DBUS my system runs X
Window System
I'm trying to track down a problem that seems to have been introduced
after FreeBSD 8.0.
I'm trying to install FreeBSD inside a virtualbox guest whose host is
a Win7 64bit box running Vbox 4.0.2
PC-BSD based on FreeBSD 8.0 works fine. But FreeBSD 8.1 does not.
Here is what does not work means
On 1/20/11 5:39 PM, David Southwell wrote:
[...]
deleted gobject-introspection
Got the similar error messages--
Traceback (most recent call last):
File ../tools/g-ir-scanner, line 43, in module
from giscanner.scannermain import scanner_main
File
the problem.
Regards,
Greg
- --
Greg Larkin
http://www.FreeBSD.org/ - The Power To Serve
http://www.sourcehosting.net/ - Ready. Set. Code.
http://twitter.com/sourcehosting/ - Follow me, follow you
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.11 (Darwin)
Comment: Using GnuPG
On Fri, Jan 21, 2011 at 11:02 AM, Greg Larkin glar...@freebsd.org wrote:
Hi Chris,
Please post some compiler output with the error message here, and that
might help someone troubleshoot the problem.
I ran portmaster -a again this morning *just* so I could reproduce this
error :D
checking
On 1/19/11 12:04 PM, David Southwell wrote:
Thanks in advance for help with this one:
File /usr/local/bin/g-ir-scanner, line 43, in module
from giscanner.scannermain import scanner_main
[...]
File /usr/local/lib/python2.6/hashlib.py, line 136, in module
md5 =
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 1/20/11 5:39 PM, David Southwell wrote:
[...]
deleted gobject-introspection
Got the similar error messages--
Traceback (most recent call last):
File ../tools/g-ir-scanner, line 43, in module
from giscanner.scannermain import
On Thu, Jan 20, 2011 at 9:35 PM, Greg Larkin glar...@freebsd.org wrote:
Hi David,
What is the output of the command pkg_version -vL=? Can you build
libsoup successfully in a clean jail (no ports installed) with an
up-to-date ports tree?
- From what I've seen by Googling the error message
Thanks in advance for help with this one:
File /usr/local/bin/g-ir-scanner, line 43, in module
from giscanner.scannermain import scanner_main
File /usr/local/lib/gobject-introspection/giscanner/scannermain.py, line
34, in module
from giscanner.dumper import
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 1/19/11 12:04 PM, David Southwell wrote:
Thanks in advance for help with this one:
File /usr/local/bin/g-ir-scanner, line 43, in module
from giscanner.scannermain import scanner_main
[...]
File /usr/local/lib/python2.6/hashlib.py,
On Sun, 16 Jan 2011 08:24:13 +0100
Matthias Apitz g...@unixarea.de wrote:
Master: ad4 WDC WD2500BEVT-22ZCT0/11.01A11 SATA revision 2.x
As well the BIOS has no visible option for this. I want to disable
this, what could I do?
Since it's a WDC disk I guess it's one of the green ones.
El dÃa Sunday, January 16, 2011 a las 10:05:39AM +, Bruce Cran escribió:
On Sun, 16 Jan 2011 08:24:13 +0100
Matthias Apitz g...@unixarea.de wrote:
Master: ad4 WDC WD2500BEVT-22ZCT0/11.01A11 SATA revision 2.x
As well the BIOS has no visible option for this. I want to disable
On Sun, 16 Jan 2011, Matthias Apitz wrote:
El d??a Sunday, January 16, 2011 a las 10:05:39AM +, Bruce Cran escribi??:
On Sun, 16 Jan 2011 08:24:13 +0100
Matthias Apitz g...@unixarea.de wrote:
Master: ad4 WDC WD2500BEVT-22ZCT0/11.01A11 SATA revision 2.x
As well the BIOS has no
Hello,
I have a laptop Acer Aspire One D250 running 9-CURRENT and it seems that
after ~12 secs the disk is spinning down and is coming up again if an
action, like a command to start, requires this; I have checked with
atacontrol(8) but as far as I can see spin down is disabled:
# atacontrol
801 - 900 of 10446 matches
Mail list logo