, the system does boot. Once booted I can
run makeworld for a week without any issues. Perhaps a disk issue?
I'm booting off a MegaRAID controller. Though I cannot crash
the system using intensive IO after it boots. After it boots, it seems
to be rock solid, so I'm lost here.
Can boot loader be put
lost here.
Can boot loader be put into verbose mode and have it output
debugging info?
I don't know if there is a debug mode for the boot loader, but if
the problem is happening at random then I would want to investigate
hardware failures/malfunctions. At any rate, no fully operational
machine
Hello,
Can someone suggest a way to debug FreeBSD's boot loader?
My FBSD 6.2 freezes at random after printing Default: F1 I haven't
noticed this issue in the past with older versions of FreeBSD.
Since this is a random issue, it's very hard to pin point the culprit
by process of elimination
Is there anyway to install a new boot loader without having to
perform a complete reinstall?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Tom Marchand wrote:
Is there anyway to install a new boot loader without having to perform
a complete reinstall?
_
Have a read though the man page for boot0cfg if you want to reinstall
the freebsd bootloader, otherwise you can install grub from ports.
Vince
PROTECTED] On Behalf Of Tom Marchand
Sent: 05 March 2007 22:45
To: freebsd-questions@freebsd.org
Subject: Changing Boot Loader
Is there anyway to install a new boot loader without having to
perform a complete reinstall?
___
freebsd-questions@freebsd.org
Vince wrote:
Tom Marchand wrote:
Is there anyway to install a new boot loader without having to perform
a complete reinstall?
_
Have a read though the man page for boot0cfg if you want to reinstall
the freebsd bootloader, otherwise you can install grub from ports.
Vince
or GAG (ports
Vince wrote:
Tom Marchand wrote:
Is there anyway to install a new boot loader without having to perform
a complete reinstall?
_
Have a read though the man page for boot0cfg if you want to reinstall
the freebsd bootloader, otherwise you can install grub from ports.
Vince
or GAG (ports
Hi.
At Sat, 23 Sep 2006 21:49:20 +0200,
Vo?ten?k Vladim?r wrote:
I have an old HP NETSERVER PRO 2xpentium pro, 256 MB ram,
and I tried to install the actual FREEBSD 6.1 there. I made 3
floppies: boot, kernel1 and kernel2. When it starts booting from
the boot floppy, the loader show I only
--- Vo¹tenák Vladimír [EMAIL PROTECTED] wrote:
Hi
I have an old HP NETSERVER PRO 2xpentium pro, 256 MB
ram,
and I tried to install the actual FREEBSD 6.1 there.
I made 3
floppies: boot, kernel1 and kernel2. When it starts
booting from
the boot floppy, the loader show I only have
Hi
I have an old HP NETSERVER PRO 2xpentium pro, 256 MB ram,
and I tried to install the actual FREEBSD 6.1 there. I made 3
floppies: boot, kernel1 and kernel2. When it starts booting from
the boot floppy, the loader show I only have 16 MB of RAM
(instead 256MB I have there). Then it asks for
I installed FreeBSD 6.1 on 2 different HD's 3.5 GB. When the reboot is
supposed to happen the Boot loader doesnot come up. Is there a way to
fix this from a single user prompt or any other way? I have never had
this happen to FreeBSD and I have been installing it on many boxes since
version
On Sunday 16 April 2006 17:42, jesse marquez wrote:
Hello,
Last night I installed FreeBSD 6.0 - Release on a Gateway 450SX4 laptop.
For some reason it seems the loader is not reading the local changes made
to /boot/loader.conf . Have any of you expierenced this? I've checked my
changes made
(hd0,2,a)
kernel/boot/loader
Note that Linux counts partitions differently. hd0,2,a is
/dev/ad0s3a.
Greg
--
When replying to this message, please copy the original recipients.
If you don't, I may ignore the reply or reply to the original recipients.
For more information, see
I am currently working on recovering data from an old Maxtor MaxAttach
NAS4000. This box is based on FreeBSD V2.05.
Can anyone direct me to a place where I can download a bootloader
install that will boot that system? The current bootloader code just
throws up its hands and gives up when
At 12:00 AM 9/18/2005, John Do wrote:
Hi guys
I still can't boot BSD :(
I have tried everything I can and bla bla read etc etc
:(
Here is the setup (I boot off ad0)
ad0 - boot loader and Windows XP
ad2 slice 2 - FreeBSD Install
Exactly from the emergency shell do I need to type to
configure
Glenn Dawson [EMAIL PROTECTED] writes:
boot0cfg -B -s 5 ad0
boot0cfg -B -s 2 ad2
I don't remember who asked what before, but you should also try:
boot0cfg -B -s 5 -o packet ad0
boot0cfg -B -s 2 -o packet ad2
fdisk /dev/ad0
fdisk /dev/ad2
bsdlabel /dev/ad0
I wouldn't bother if you don't
Hi Gary and Glen,
I have the output. It was sure tiring to write out
and then type back though :)
bsdlabel /dev/ad2s1:
No Valid Label
bsdlabel /dev/ad2s2:
8 partitions
# size offset fstype [fsizebsize
bps/cpg]
a: 8191983 0 4.2BSD 2048 16384
28552
John Do [EMAIL PROTECTED] writes:
fdisk, etc, looked good.
boot0cfg -v /dev/ad0
# flag | start chs | type| end chs
| offset | size
1 0x80 0: 1:10x07 1023 254:63 63
40001787
OK.
boot0cfg -v /dev/ad2
# flag |
boot CD and I
can simply boot BSD by booting with the GRUB CD and
typing:
rootnoverify (hd2,1)
makeactive
chainloader +1
boot
GRUB has always been simple and intuitive for me so
I'll stick with that and stay away from the hell of
the BSD boot loader :)
This really is my only gripe about FreeBSD I
Disk 1
If I press F1, FreeBSD boots as expected.
However, if I press F5 (it seems I have to do this twice otherwise I get
FreeBSD again), I get a prompt saying
Default: 0:ad(0,a)/boot/loader
boot:
Now what?
It doesn't seem to matter what I put here, it won't make Windows start. Is
there something
:
F1 FreeBSD
F5 Disk 1
If I press F1, FreeBSD boots as expected.
However, if I press F5 (it seems I have to do this twice otherwise I get
FreeBSD again), I get a prompt saying
Default: 0:ad(0,a)/boot/loader
boot:
Now what?
It doesn't seem to matter what I put here, it won't make Windows
On 8/19/05, Bsderss [EMAIL PROTECTED] wrote:
Hi,
Can anyone please tell me where is the source code of
i386 boot loader in the freebsd src tree?
Obviously different arch has different boot loader. If
I just want to see the src of i386 boot loader, is the
path ./sys/boot/i386/loader
Hi,
Can anyone please tell me where is the source code of
i386 boot loader in the freebsd src tree?
I found there is some code in the following paths:
# find . -name loader*
./share/examples/bootforth/loader.rc
./sys/boot/alpha/loader
./sys/boot/arc/loader
./sys/boot/common/loader.8
./sys/boot
Hi,
Can anyone please tell me where is the source code of
i386 boot loader in the freebsd src tree?
I found there is some code in the following paths:
# find . -name loader*
./share/examples/bootforth/loader.rc
./sys/boot/alpha/loader
./sys/boot/arc/loader
./sys/boot/common/loader.8
./sys/boot
hello
I have the following configuration
ad0s1 - win xp with ntfs
ad0s2 - freebsd
they were installed in the above order, so now I can use only freebsd
is there a way to configure freebsd's boot loader to be able to boot
from the win partition (I googled around and found boot0cfg (8
Petre Bandac wrote:
I have the following configuration
ad0s1 - win xp with ntfs
ad0s2 - freebsd
they were installed in the above order, so now I can use only freebsd
is there a way to configure freebsd's boot loader to be able to boot
from the win partition (I googled around and found
On 8/2/05, Petre Bandac [EMAIL PROTECTED] wrote:
hello
I have the following configuration
ad0s1 - win xp with ntfs
ad0s2 - freebsd
they were installed in the above order, so now I can use only freebsd
is there a way to configure freebsd's boot loader to be able to boot
from the win
On Jul 16, 2005, at 1:35 PM, freebsd wrote:
Gunter Wambaugh wrote:
On Jul 16, 2005, at 1:53 AM, e-mail for freebsd wrote:
Hi,
I have installed FreeBSD 5.4 (from CD) onto a ThinkPad A21. I
also have
Win2Kpro on this laptop. FreeBSD is installed at about the 7G
mark on the
On Jul 16, 2005, at 1:53 AM, e-mail for freebsd wrote:
Hi,
I have installed FreeBSD 5.4 (from CD) onto a ThinkPad A21. I also
have
Win2Kpro on this laptop. FreeBSD is installed at about the 7G mark
on the
harddrive.
I had 4.3 installed previously, and thought I would just start
over.
Gunter Wambaugh wrote:
On Jul 16, 2005, at 1:53 AM, e-mail for freebsd wrote:
Hi,
I have installed FreeBSD 5.4 (from CD) onto a ThinkPad A21. I also have
Win2Kpro on this laptop. FreeBSD is installed at about the 7G mark
on the
harddrive.
I had 4.3 installed previously, and thought I
On Sun, 2005-06-05 at 13:39 +0200, Wojciech Puchar wrote:
something like for NetBSD - just load one ELF file from disk and that's
all.
FreeBSD /boot/loader and it's script are overcomplicated.
What complicates the normal boot process is that the kernel requires a
pre-boot environment
does such things exist for FreeBSD?
something like for NetBSD - just load one ELF file from disk and that's
all.
FreeBSD /boot/loader and it's script are overcomplicated.
or maybe there are scripts available that just load file no bootmenus,
delays, options etc
On Sun, 5 Jun 2005, Wojciech Puchar wrote:
does such things exist for FreeBSD?
something like for NetBSD - just load one ELF file from disk and
that's all.
FreeBSD /boot/loader and it's script are overcomplicated.
or maybe there are scripts available that just load file no
bootmenus
, it doesnt load
the FreeBSD boot loader but instead two WinXP Professional is being shown.
How do I recover the FreeBSD boot loader? I can't see any F1, F2 or F3 which
allows me to choose which OS to boot. It seems the newly installed WinXP has
removed the FreeBSD boot manager? Pls help me :-(
thank
a new bootable WinXP. so now, when the machine boots, it doesnt load
the FreeBSD boot loader but instead two WinXP Professional is being shown.
How do I recover the FreeBSD boot loader? I can't see any F1, F2 or F3 which
allows me to choose which OS to boot. It seems the newly installed WinXP has
, when the machine boots, it doesnt load
the FreeBSD boot loader but instead two WinXP Professional is being shown.
How do I recover the FreeBSD boot loader? I can't see any F1, F2 or F3 which
allows me to choose which OS to boot. It seems the newly installed WinXP has
removed the FreeBSD
The lsdev command on this boot loader gave the same results as the
(B one booted from the IDE disk.
(B
(BSince I'm not there to watch you do it, it's hard to say whether that
(Bproves you can't do it or not. Not that I'm sure I'd know anyway.
(B
(BSearching on google for [HP Kayak XU] found this page
On Tue, 10 May 2005 22:23:28 -0700 (PDT)
(BBrian O'Shea [EMAIL PROTECTED] wrote
(B
(B [...]
(B There is a boot loader installed in the MBR of both disks, but I am
(B trying to boot the IDE disk from the loader on its own MBR. I didn't
(B try booting the loader from the SCSI disk
or F5) to boot from.
The lsdev command on this boot loader gave the same results as the
one booted from the IDE disk.
From what I've read and what I've experienced, putting hard disks
and CD-ROMs on the same channel is counterproductive. Boot problems
and data problems are said to be likely
Replying to my own question with another question after some more
RTFM'ing...
--- Brian O'Shea [EMAIL PROTECTED] wrote:
...
... When I created the slice on
disk1, sysinstall warned me that the geometry was incorrect. Instead
it used some other values that
to do it since the data on the disk is not important,
but got the same result (boot loader can't find the root filesystem on
the disk). I'm at a loss.
-brian
__
Yahoo! Mail Mobile
Take Yahoo! Mail with you! Check email on your mobile phone.
http
, however after it completed and the system rebooted, the
(B boot loader could not find the root filesystem. This system also has
(B a SCSI disk (disk2) which has an older release of FreeBSD installed.
(B That is the FFS and swap partitions that you see in the lsdev output
(B below.
(B
(BDoes
--- Joel [EMAIL PROTECTED] wrote:
... This system also has
a SCSI disk (disk2) which has an older release of FreeBSD installed.
That is the FFS and swap partitions that you see in the lsdev output
below.
Does that mean it boots the system on the SCSI disk?
There is a boot loader
hi
I have an AMD Duron 700Mhz running FreeBSD 5.3.
When I turn it on I get
error 16 lba 287
error 16 lba 287
No /boot/loader
I've found:
http://lists.freebsd.org/pipermail/freebsd-questions/2005-March/081879.html
but the instructions don't do anything.
Help
When warm/cold booting an Interjet under FreeBSD 5.2.1 or 5.3 (vanilla
installs), kernel loading fails. The only workaround I've figured out
so far is to reboot from the boot loader OK prompt, as shown below.
I'm not skilled in the hardware troubleshooting arena, so I'm stumped.
I've searched
Is there a 1024 cylinder limit on the first slice for a dual boot
PC system using the FBSD boot loader?
I presume there is, but I couldn't find it in the handbook. Maybe I
missed it.
Thanks,
John
--
John Conover, [EMAIL PROTECTED], http://www.johncon.com
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Thursday 13 January 2005 10:02, John Conover wrote:
Is there a 1024 cylinder limit on the first slice for a dual boot
PC system using the FBSD boot loader?
This depends if your computers BIOS supports disk packet interface, see 'man 8
boot0cfg
Is there a 1024 cylinder limit on the first slice for a dual boot
PC system using the FBSD boot loader?
I presume there is, but I couldn't find it in the handbook. Maybe I
missed it.
Not if you have a reasonably recent BIOS.
FreeBSD can handle it just fine as long as the BIOS can deal
On 13 Jan 2005 09:02:42 -, John Conover [EMAIL PROTECTED] wrote:
Is there a 1024 cylinder limit on the first slice for a dual boot
PC system using the FBSD boot loader?
I presume there is, but I couldn't find it in the handbook. Maybe I
missed it.
Somewhere between 1997 and 1999 this stopped
Hello,
I am looking for a way to add memtest86 to the FreeBSD bootloader so that my
techs
can easily test RAM when needed.
From what I understand, the memtest86 build script makes two objects:
1) a linux-kernel-alike image.
2) an ELF object.
___
You will probably have better luck using a more flexible boot loader
like GRUB. How about just putting memtest86 on a floppy or CDROM and
your techs can boot to the removable media whenever they need to test
memory. This approach seems much more flexible, as any machine can then
be used
- everything is generally done via a network installer we have hooked
up, so removable media is not an option.
You will probably have better luck using a more flexible boot loader
like GRUB. How about just putting memtest86 on a floppy or CDROM and
your techs can boot to the removable media whenever
On Thu, Nov 11, 2004 at 12:35:26PM -0500, Dan Kilbourne wrote:
Nathan Kinkade extolled:
You will probably have better luck using a more flexible boot loader
like GRUB. How about just putting memtest86 on a floppy or CDROM and
your techs can boot to the removable media whenever they need
bsd boot loader? I am some what
scared to even bother with a boot loader. Please advise on what I can
do to make windows XP allow another OS like FREEBSD to work though its
on a separate drive.
Synopsis of problem: XP installed on primary master (ad0), and freebsd
installed taking up whole
easy loader(Option 1), there was a time when by doing just that, It
destroyed the MBR of my primary drive! Strange as it may seem, though
why would windows xp be destroyed if I tried to install on a separate
physical hard drive (D:/) the free bsd boot loader? I am some what
scared to even bother
I had a similar problem after installing 5.3b7.
My solution (win2K 5.3) was to use the ms boot manager.
To do this, copy /boot/boot1 to c:\, naming it whatever you want,
eg FreeBSD_boot1.bsd. Edit boot.ini to contain a line
like:
c:\FreeBSD_boot1.bsd=Freebsd 5.3
In order to edit boot.ini
On 2004/11/03, at 11:17, Andrew Smith wrote:
I'm trying to get Windows XP and FreeBSD 4.10 to dual boot.
So I installed XP, and then FreeBSD, with the Boot Manager.
Rebooted and I get the FreeBSD boot manager. When I hit F2, FreeBSD
loads without problems. However when I hit F1, the computer
Hi FreeBSD-Gurus!
[Please Cc: me]
Short Description: FreeBSD 4.10, installed on /dev/hde (linux lingo),
booting via lilo (on hda) - hde goes to stage0 but stops there.
Longer:
Recently I have installed FreeBSD (4.10) for compiling TeXlive binaries
for i386-freebsd. I used some disk space on
On Sun, Jul 04, 2004 at 12:19:23AM -0400, Bruce Hunter wrote:
Hey,
Thanks for you help. I figured out my problem. I was trying to install
grub to (hd0) while running gnome. I read some more of the manual for
grub and realized that I had to create a floppy disk to do the
installation. So, I
Happy 4th!
okay, now that's out of the way. I am bored with freebsds' boot loader
and want to install Grub from the ports collection.
My question is: When grub installs, will it find my partitions and set
everything up for me? So, when I reboot grub is working.
Here is my hard drive setup
On Sat, Jul 03, 2004 at 03:01:07PM -0400, Bruce Hunter wrote:
Happy 4th!
okay, now that's out of the way. I am bored with freebsds' boot loader
and want to install Grub from the ports collection.
My question is: When grub installs, will it find my partitions and set
everything up for me
title FreeBSD 5.2.1
root (hd0,2,a)
kernel /boot/loader
Sorry, this should be (hd0,1,a) ! The first slice (windows) is (hd0,0)
and the second is (hd0,1), and you want the root-partition within that
(hd0,1,a).
GH
___
[EMAIL
On Sat, 2004-07-03 at 16:17, Geert Hendrickx wrote:
title FreeBSD 5.2.1
root (hd0,2,a)
kernel /boot/loader
Sorry, this should be (hd0,1,a) ! The first slice (windows) is (hd0,0)
and the second is (hd0,1), and you want the root-partition within that
(hd0,1,a).
GH
On Sat, Jul 03, 2004 at 05:35:35PM -0400, Bruce Hunter wrote:
On Sat, 2004-07-03 at 16:17, Geert Hendrickx wrote:
title FreeBSD 5.2.1
root (hd0,2,a)
kernel /boot/loader
Sorry, this should be (hd0,1,a) ! The first slice (windows) is (hd0,0)
and the second is (hd0,1), and you
On Sat, 2004-07-03 at 18:02, Geert Hendrickx wrote:
On Sat, Jul 03, 2004 at 05:35:35PM -0400, Bruce Hunter wrote:
On Sat, 2004-07-03 at 16:17, Geert Hendrickx wrote:
title FreeBSD 5.2.1
root (hd0,2,a)
kernel /boot/loader
Sorry, this should be (hd0,1
Thanks for the help,
I think I will be able to get it working now, after that information.
The only question I have or comment is. Shouldn't I have the stages and
grub.conf in /boot/grub ? You said /boot. Just wondering which it is.
Thanks again..
Bruce
I'm sorry, you're right.
(I
I moved all the files and ran the commands that you said. I am having
this problem.
GNU GRUB version 0.95 (640K lower / 3072K upper memory)
[ Minimal BASH-like line editing is supported. For the first word, TAB
lists possible command completions. Anywhere else TAB lists the
possible
Seems as you don't have write permission for /dev/ad0. Did you run grub
as root?
GH
On Sat, Jul 03, 2004 at 07:21:45PM -0400, Bruce Hunter wrote:
I moved all the files and ran the commands that you said. I am having
this problem.
GNU GRUB version 0.95 (640K lower / 3072K upper
Hmm.. I'm root
I even tried changing the permissions on /dev/ad0
the device has read and write access.. wierd.
Maybe instead of setup (hd0) it should be setup (ad0)
But device.map sets the hd0 pointer to /dev/ad0
any other ideas?
Bruce
On Sat, 2004-07-03 at 19:31, Geert Hendrickx wrote:
What can I modify to make
the machine Automatically select option # 2 during the boot process?
Check out your /boot/loader.conf file.
Comment out the hint.acpi.0.disabled=1 if it's in there.
I don't know for sure that this will work, but I'd try it.
___
What can I modify to make
the machine Automatically select option # 2 during the boot process?
Check out your /boot/loader.conf file.
Comment out the hint.acpi.0.disabled=1 if it's in there.
I don't know for sure that this will work, but I'd try it.
my /boot/loader.conf file is empty.
What can I modify to make
the machine Automatically select option # 2 during the boot process?
Check out your /boot/loader.conf file.
Comment out the hint.acpi.0.disabled=1 if it's in there.
I don't know for sure that this will work, but I'd try it.
my /boot/loader.conf file is empty.
Perhaps
/
Fdisk, label and the rest of install went fine, but on reboot I get the
following error:
Disk error 0x1 (lba=0x21fc09f)
No /boot/loader
FreeBSD/i386 BOOT
Default: 0:ad(0,a)/kernel
boot:
If I hit enter, it spits out this error:
WARNING: loader(8) metadata is missing!
and starts
Hi,
I installed FreeBSD 5.2 with / on ad0s1a
Since I have other (LInux) OSes on the same disk,
I'm using GRUB booting FreeBSD
with
root (hd0,a)
kernel /boot/loader
boot
Boot doesn't succeed with message
Filesystem type unknown, partition type 0xa5
Error 17: Cannot mount selected partition
I
On Wed, 05 May 2004 14:34:38 +0200, Klaus Juergen Osswald wrote:
Is there a problem to boot the new ufs2 filesystem with GRUB ?
Yes. GRUB doesn't understand it yet
How can I savely boot FreeBSD my other OSSes ?
a) try the patch at PR 62299
b) chain the bootblock on the FreeBSD partition:
I have just copy my files from a bootable FreeBSD3.5 CD to a dos partition. Which
bootloader should I choose to make sure my system boots to FreeBSD?
DS
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
On an older Dell PowerEdge 1300, single 36GB hard disk connected through a PERC
controller. Installed from the 5.2.1-RELEASE ISO. The machine installs fine, has no
troubles getting at the disk through the 'amr' device. I get CVSup on the machine,
synch my source, do a 'make buildworld'
C.L. Lai [ALAN] [EMAIL PROTECTED] writes:
my boot loader is corrupted during improper shutdown, is there anyway i
can fix it w/o having local access to the machine?
Which stage of the boot loader?
[How far does it get?]
Do you have a serial console?
[If not, then obviously you'll need
is
still on, it's just that i cannot be rebooted ever, otherwise i will lose
control to it. so i gotta fix it before any reboot occurs
On 11 Mar 2004, Lowell Gilbert wrote:
C.L. Lai [ALAN] [EMAIL PROTECTED] writes:
my boot loader is corrupted during improper shutdown, is there anyway i
can fix
my boot loader is corrupted during improper shutdown, is there anyway i
can fix it w/o having local access to the machine?
thx
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail
On Fri, 9 Jan 2004 22:08:49 -0800
Drew Tomlinson [EMAIL PROTECTED] wrote:
- Original Message -
From: Adrian Pircalabu [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, January 09, 2004 1:33 AM
Subject: Re: how to use /boot/loader to load the kernel ?
On Fri, 9 Jan 2004 11
Hi,
What can I do to use /boot/loader to load the kernel ? I can not use
various commands like top (nlist failed), vmstat( undefined symbols:
_kmemstatistics _bucket _zlist).
My fstab looks like this:
/dev/ad0s1b noneswapsw 0 0
/dev/ad0s2a
On Fri, 9 Jan 2004 11:28:53 +0200
Adrian Pircalabu [EMAIL PROTECTED] wrote:
Hi,
What can I do to use /boot/loader to load the kernel ? I can not use
various commands like top (nlist failed), vmstat( undefined symbols:
_kmemstatistics _bucket _zlist).
My fstab looks like this:
/dev/ad0s1b
- Original Message -
From: Adrian Pircalabu [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, January 09, 2004 1:33 AM
Subject: Re: how to use /boot/loader to load the kernel ?
On Fri, 9 Jan 2004 11:28:53 +0200
Adrian Pircalabu [EMAIL PROTECTED] wrote:
Hi,
What can I do
Hi all,
I was banging my head against the wall too long yesterday, so I have
broken down, and have to ask. Any help on this matter is greatly
appreciated.
Here is what I'm trying to do. I have two computers, both running 4.8,
clean, minimal installs. They have two serial cables connected to
On 09-Dec-2003 Daniel Goepp wrote:
Hi all,
I was banging my head against the wall too long yesterday, so I have
broken down, and have to ask. Any help on this matter is greatly
appreciated.
Here is what I'm trying to do. I have two computers, both running 4.8,
clean, minimal installs.
, the machine boots fine using GRUB, but still won't boot with the
FreeBSD boot loader. So I suppose I'll continue to use GRUB, but I'm a
little confused as to why the FreeBSD boot0 program isn't working. It
was previously working on this same laptop with a different hard disk.
So I guess
Need to know the location of the bootloader config file
in the 4.8 release.
thanks
sundeep
Confidentiality Notice
The information contained in this electronic message and any attachments to this
message are intended
for the exclusive use of the addressee(s) and may contain confidential or
Hi,
Insert in /etc/loader.conf this line
hint.acpi.0.disabled=1
**
Diese Nachricht ist ausschliesslich fuer den bezeichneten Adressaten
oder dessen Vertreter bestimmt. Beachten Sie bitte, dass jede Form der
Sorry,
Insert in /boot/loader.conf this line
hint.acpi.0.disabled=1
**
Diese Nachricht ist ausschliesslich fuer den bezeichneten Adressaten
oder dessen Vertreter bestimmt. Beachten Sie bitte, dass jede Form der
.
FreeBSD/i386 BOOT
Default: 0:ad(0,a)/kernel
boot:
At this point I've tried entering the following things.
X:da(Y,a)/Z with
-X anywhere between 0 and 5.
-Y anywhere between 0 and 2.
-Z either /kernel or /boot/loader.
The following options allowed a continued boot.
1:da(0,a)/kernel
1:da
.
FreeBSD/i386 BOOT
Default: 0:ad(0,a)/kernel
boot:
At this point I've tried entering the following things.
X:da(Y,a)/Z with
-X anywhere between 0 and 5.
-Y anywhere between 0 and 2.
-Z either /kernel or /boot/loader.
The following options allowed a continued boot.
1:da(0,a)/kernel
1:da
the boot2 screen.
FreeBSD/i386 BOOT
Default: 0:ad(0,a)/kernel
boot:
At this point I've tried entering the following things.
X:da(Y,a)/Z with
-X anywhere between 0 and 5.
-Y anywhere between 0 and 2.
-Z either /kernel or /boot/loader.
The following options allowed a continued boot.
1:da(0
.
FreeBSD/i386 BOOT
Default: 0:ad(0,a)/kernel
boot:
At this point I've tried entering the following things.
X:da(Y,a)/Z with
-X anywhere between 0 and 5.
-Y anywhere between 0 and 2.
-Z either /kernel or /boot/loader.
The following options allowed a continued boot.
1:da(0,a)/kernel
1:da
.
FreeBSD/i386 BOOT
Default: 0:ad(0,a)/kernel
boot:
At this point I've tried entering the following things.
X:da(Y,a)/Z with
-X anywhere between 0 and 5.
-Y anywhere between 0 and 2.
-Z either /kernel or /boot/loader.
The following options allowed a continued boot.
1:da(0,a)/kernel
1:da
I have installed FreeBSD 4.7 on my desktop, which already had windows
2000 on it in a partition. I also have a second IDE disk in the computer.
Upon boot, I get the following menu:
F1 FreeBSD (default)
F2 DOS
F5 Disk 1
How do I rename the label for F2 from DOS to Windows, and how do I
eliminate
On Mon, Feb 03, 2003 at 11:30:23AM +0100, Anand Buddhdev wrote:
I have installed FreeBSD 4.7 on my desktop, which already had windows
2000 on it in a partition. I also have a second IDE disk in the computer.
Upon boot, I get the following menu:
F1 FreeBSD (default)
F2 DOS
F5 Disk 1
On Mon, 3 Feb 2003, Anand Buddhdev wrote:
I have installed FreeBSD 4.7 on my desktop, which already had windows
2000 on it in a partition. I also have a second IDE disk in the computer.
Upon boot, I get the following menu:
F1 FreeBSD (default)
F2 DOS
F5 Disk 1
How do I rename the label
In [EMAIL PROTECTED], William Palfreman
[EMAIL PROTECTED] typed:
The other nice this about the FreeBSD boot manager is that it
remember what you did last time and uses that as default next time
round.
Grub, on the other hand, only remembers if you tell it to. It's nice
to be able to disable
101 - 200 of 218 matches
Mail list logo
