Re: zfs won't automount

Dimitry Andric wrote: On 2009-09-02 18:55, Lisa Besko wrote: I have a system that has a simple zfs raid 0 volume on it and it will now mount when the system boots. After the system is up I can run /etc/rc.d/zfs start and it's fine. I don't see any errors in the log file other than the ZFS

zfs won't automount

I have a system that has a simple zfs raid 0 volume on it and it will now mount when the system boots. After the system is up I can run /etc/rc.d/zfs start and it's fine. I don't see any errors in the log file other than the ZFS is experimental in FreeBSD message. I'm running FreeBSD 7.2

Re: named stop not stopping

Guy Helmer wrote: Lisa Besko wrote: We had an issue with the /etc/rc.d/named script this morning where it looped/hung in the wait_for_pids subroutine. We run a job to restart named which calls the /etc/rc.d/named script with a stop command. For some reason named did not stop properly

Re: named stop not stopping

Doug Barton wrote: Lisa Besko wrote: We had an issue with the /etc/rc.d/named script this morning where it looped/hung in the wait_for_pids subroutine. We run a job to restart named which calls the /etc/rc.d/named script with a stop command. For some reason named did not stop properly

named stop not stopping

We had an issue with the /etc/rc.d/named script this morning where it looped/hung in the wait_for_pids subroutine. We run a job to restart named which calls the /etc/rc.d/named script with a stop command. For some reason named did not stop properly and the process continued to list PIDs from

Fixing cvsup bus error

I'm getting the bus error mentioned in PR bin/124353 and I need a bit more detail on how to apply the patch. Right now I'm getting the following error when I try to do a make on cvsup-without-gui: Fatal Error: bad version stamps: SupTCP.m3 I put the changes in the

Re: Fixing cvsup bus error

Jeremy, Thanks that helped alot. I used portsnap to update my ports tree then rebuilt ezm3 and cvsup and life is much better. Thanks for the pointer. LB Jeremy Chadwick wrote: On Wed, Sep 10, 2008 at 10:26:45AM -0400, Lisa Besko wrote: I'm getting the bus error mentioned in PR bin/124353

Re: boot failed after make installkernel from 6.3-RELEASE to 7.0-RELEASE

I've had this very same problem. I had to go into the kernel config and change comment out this line: optionsATA_STATIC_ID I may have also had to edit /etc/fstab so that it had the proper device name in it. Then I could rebuild the kernel and it worked. For me this had to to with

Re: Swapping boot disks and getting mountroot

for the `rootdev' and `root_disk_unit' loader variables? The loader(8) manual page has more information. No I haven't tried that yet. Will that get me to a point where I can trust it to boot on it's own to the correct disk all the time? LB -- Lisa Besko

Re: Swapping boot disks and getting mountroot===SOLVED

. I rebooted to my working kernel and edited /etc/fstab to use ad0. Then booted my test kernel again. The system booted. I installed the kernel w/o ATA_STATIC_ID and was able to boot in my Sunfire X2100 and my X2200. LB Lisa Besko wrote: Joseph Koshy wrote: I notice that it finds the device

Swapping boot disks and getting mountroot

I have a system running FBSD 6.2 release (if I remember correctly) that is running on a Sunfire X2100. The disk boots fine there and I seem to be able to move it to other X2100's. The problem is that I need to move it to a Sunfire X2200. When I move it to the X2200 I get a mountroot prompt

Re: FreeBSD Intel i852GM/i855GM DRI problem

Andrei Kolu wrote: Hello guys! I have strange problem enabling DRI on Intel 855GM graphics card. Kernel shows that everything is allright but why I enable DRI in xorg.conf and startx then system freeze and reboot without any error message- /var/log/Xorg.log.0 file was not updated with error

Re: Sunfire X2200 ipfw and bge issues

Paulius Bulotas wrote: Now any ideas on why they system reboots every time the ethernet cable is plugged in to the bge0 port? or why the nve ethernet ports are not recognized? I am getting an error the next time it reboots that says something like hyper transport sync flood error and I

Re: Sunfire X2200 ipfw and bge issues

Ian Smith wrote: On Thu, 29 Mar 2007, Lisa Besko wrote: firewall_enabled=YES firewall_type=CLIENT Try firewall_enable without the 'd'. Not much fuzzy logic in rc .. Thanks for pointing out my fat finger error. The firewall came up just fine after fixing that. Now any ideas on why

Re: Sunfire X2200 ipfw and bge issues

Lisa Besko wrote: Now any ideas on why they system reboots every time the ethernet cable is plugged in to the bge0 port? or why the nve ethernet ports are not recognized? I am getting an error the next time it reboots that says something like hyper transport sync flood error and I have

Sunfire X2200 ipfw and bge issues

. Any suggestions on what is going on and how to fix it? Any suggestions would be appreciated, I'm afraid I'm going to have to run some other OS than FreeBSD on this system if I can't get it working. Thanks, Lisa Besko ___ freebsd-stable@freebsd.org

Re: Sunfire X2200 ipfw and bge issues

Jeremy Chadwick wrote: On Thu, Mar 29, 2007 at 03:19:19PM -0400, Lisa Besko wrote: We have a new Sunfire X2200 and when I load 6.2 stable on it ipfw will not load on boot. After the system boots I can do a kldload ipfw and get it working. This system is also rebooting every time I plug