On 11/06/2008, at 3:28 AM, Sean C. Farley wrote:
had problems with burncd and my DVD drive when burning CD-RW's. When
I tried atapicam and cdrecord, it gave me problems. I believe it was
using burncd prior to atapicam that caused it because it works now
if I
do not use burncd first. You c
On Tue, 10 Jun 2008, Jerahmy Pocott wrote:
*snip*
The drive is able to mount and read cds/dvds fine, but on trying to
use burncd it says:
acd0: FAILURE - READ_TRACK_INFO ILLEGAL REQUEST asc=0x24 ascq=0x00
Any further attempts produce the above message with no delay to read
from the drive, rese
Am Tue, 10 Jun 2008 18:03:21 +1000
schrieb Greg Black <[EMAIL PROTECTED]>:
> Just for the record, I've been using burncd successfully with a
> variety of drives from the early days of FreeBSD through to at least
> 7.0-R, so I doubt if the above means very much.
Hi.
I have 2 drives here that don'
Greg Black wrote:
> On 2008-06-10, Joe Kelsey wrote:
>
> > I have never managed to use burncd with any drive.
>
> Just for the record, I've been using burncd successfully with a variety
> of drives from the early days of FreeBSD through to at least 7.0-R, so I
> doubt if the above means very much
On Tue, Jun 10, 2008 at 10:40:44AM +0200, Johan van Selst wrote:
> I have had lots of problems with burncd as well: it works fine with some
> CD burners, not with others; and hardly ever with the (cheap) DVD drives
> that I use. However using atapicam and growisofs as outlined in
> http://www.fre
Greg Black wrote:
> On 2008-06-10, Joe Kelsey wrote:
> > I have never managed to use burncd with any drive.
> Just for the record, I've been using burncd successfully with a variety
> of drives from the early days of FreeBSD through to at least 7.0-R, so I
> doubt if the above means very much.
I h
On 2008-06-10, Joe Kelsey wrote:
> I have never managed to use burncd with any drive.
Just for the record, I've been using burncd successfully with a variety
of drives from the early days of FreeBSD through to at least 7.0-R, so I
doubt if the above means very much.
Greg
Joe Kelsey wrote:
Jerahmy Pocott wrote:
On loading atapicam module it says:
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
I have never managed to use burncd with any drive.
In order to use atapicam, you must enable the pass? devices. My
devfs.conf contains:
# Commonly used
Jerahmy Pocott wrote:
On loading atapicam module it says:
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
I have never managed to use burncd with any drive.
In order to use atapicam, you must enable the pass? devices. My
devfs.conf contains:
# Commonly used by many ports
link
Quoting Jerahmy Pocott, who wrote on Tue, Jun 10, 2008 at 03:58:37PM +1000 ..
> Hello all,
>
> I'v been trying to get this dvd burner to burn, but there seems to be
> something wrong with the driver for the controller or the drive..
>
> On boot it is detected as:
> acd0: DMA limited to UDMA33,
Hello all,
I'v been trying to get this dvd burner to burn, but there seems to be
something wrong with the driver for the controller or the drive..
On boot it is detected as:
acd0: DMA limited to UDMA33, controller found non-ATA66 cable
acd0: DVDR at ata0-master UDMA33
It is connected to:
at
11 matches
Mail list logo
