cat ukbd.diff | patch
deserves the UU of Cat Award
:-)
Sorry could not resist
--
g...@unixarea.de - http://www.unixarea.de/
> Am 13.02.2020 um 17:11 schrieb Hans Petter Selasky :
>
> On 2020-02-13 15:18, Alex V. Petrov wrote:
>> 13.02.2020 19:34, Hans Petter Selasky пишет:
>>> Hi,
>>>
>>>
ernel: umass0: detached
What can I do to avoid this?
matthias
--
Matthias Apitz, ✉ g...@unixarea.de, http://www.unixarea.de/ +49-176-38902045
Public GnuPG key: http://www.unixarea.de/key.pub
May, 9: Спаси́бо освободители! Thank you very much, Russi
El día viernes, enero 04, 2019 a las 10:09:27p. m. +0100, Hans Petter Selasky
escribió:
> On 1/4/19 7:31 PM, Matthias Apitz wrote:
> > El día viernes, enero 04, 2019 a las 07:02:16p. m. +0100, Hans Petter
> > Selasky escribió:
> >
> >> On 1/4/19 7:03 PM, Ma
On Fri, 4 Jan 2019 22:09:27 +0100, Hans Petter Selasky wrote:
> On 1/4/19 7:31 PM, Matthias Apitz wrote:
>> El día viernes, enero 04, 2019 a las 07:02:16p. m. +0100, Hans
>> Petter Selasky escribió:
>>
>>> On 1/4/19 7:03 PM, Matthias Apitz wrote:
>>>>
El día viernes, enero 04, 2019 a las 07:02:16p. m. +0100, Hans Petter Selasky
escribió:
> On 1/4/19 7:03 PM, Matthias Apitz wrote:
> > I've applied the 2nd patch on the already patched sources, it fails.
> > Should I use the original sources without your first patch?
>
mattias
--
Matthias Apitz, ✉ g...@unixarea.de, http://www.unixarea.de/ +49-176-38902045
Public GnuPG key: http://www.unixarea.de/key.pub
October, 7 -- The GDR was different: Peace instead of Bundeswehr and wars,
Druschba
instead of Nazis, to live instead of to survive.
signature.asc
Descr
El día viernes, enero 04, 2019 a las 12:45:47p. m. +0100, Hans Petter Selasky
escribió:
> On 1/4/19 11:46 AM, Matthias Apitz wrote:
> > Jan 4 11:26:39 c720-r342378 kernel: uhub_read_port_status: port 13,
> > wPortStatus=0x07a0, wPortChange=0x, err=USB_ERR_NORMAL_COMPLETION
&
El día jueves, enero 03, 2019 a las 01:36:08p. m. +0100, Ludovic Rousseau
escribió:
> I hope this email will go to freebsd-usb@ since I am not a member of this
> list.
>
> Le jeu. 3 janv. 2019 à 13:19, Hans Petter Selasky a écrit :
> >
> > On 1/3/19 12:35 PM, Matthia
El día jueves, enero 03, 2019 a las 11:03:26a. m. +0100, Hans Petter Selasky
escribió:
> On 1/3/19 10:48 AM, Matthias Apitz wrote:
> > Is there a way log log any init call to libusb.so to see which process
> > is doing something with libusb.so after devd(8) started pcscd?
>
El día jueves, enero 03, 2019 a las 09:31:53a. m. +0100, Hans Petter Selasky
escribió:
> On 1/3/19 7:04 AM, Matthias Apitz wrote:
> > I think, we should isolate the problem from PCSC and focus (first) on the
> > question why are calls to usbconfig(8) are not answered anymore
>
= 0x0103
iManufacturer = 0x0001
iProduct = 0x0002
iSerialNumber = 0x
bNumConfigurations = 0x0001
Tue Jan 1 14:39:13 CET 2019
--
Matthias Apitz, ✉ g...@unixarea.de, http://www.unixarea.de/ +49-176-38902045
Public GnuPG key: http://www.unixarea.de/key.pub
October, 7 -- The GDR was diff
El día miércoles, enero 02, 2019 a las 06:15:18p. m. +0100, Hans Petter Selasky
escribió:
> On 1/2/19 6:14 PM, Matthias Apitz wrote:
> > On Wed, 2 Jan 2019 16:57:44 +0100, Hans Petter Selasky wrote:
> >> On 1/2/19 4:47 PM, Matthias Apitz wrote:
> >>> After card rem
On Wed, 2 Jan 2019 16:57:44 +0100, Hans Petter Selasky wrote:
> On 1/2/19 4:47 PM, Matthias Apitz wrote:
>> After card removal and insert devd(8) starts a new pcsd:
>
> Does pcsd install this devd(8) rule? I thought pcsd would no longer
> need to be restarted.
>
They are ma
leepq_switch
sleepq_catch_signals sleepq_wait_sig _sx_xlock_hard _sx_xlock
usbd_enum_lock_sig usb_ref_device usb_open devfs_open VOP_OPEN_APV
vn_open_vnode vn_open_cred kern_openat amd64_syscall fast_syscall_common
matthias
--
Matthias Apitz, ✉ g...@unixarea.de, http://www.unixarea.
El día miércoles, enero 02, 2019 a las 09:44:06a. m. +0100, Hans Petter Selasky
escribió:
> On 1/1/19 2:51 PM, Matthias Apitz wrote:
> > Now with r342378, it works only after boot but not after withdraw/re-insert
> > anymore. To separate the problem from GnuPG and it's so
ss = 0x
bDeviceProtocol = 0x
bMaxPacketSize0 = 0x0008
idVendor = 0x076b
idProduct = 0x6632
bcdDevice = 0x0103
iManufacturer = 0x0001
iProduct = 0x0002
iSerialNumber = 0x
bNumConfigurations = 0x0001
Tue Jan 1 14:39:13 CET 2019
--
Matthias Apitz, ✉ g...@unixar
vice ugen0.4 product:krillin
model:Aquaris_E4_5_Ubuntu_Edition device:krillin
$ adb shell
phablet@ubuntu-phablet:~$
I don't know why it works now, but not yesterday and today morning with
the same installation, same device. Only the cable is now different. I
will check at home with the cab
if I want to allow this connection. I ack'ed and had the shell prompt in
the xterm where I started 'adb shell'.
matthias
--
Matthias Apitz, ✉ g...@unixarea.de, http://www.unixarea.de/ +49-176-38902045
Public GnuPG key: http://www.unixarea.de/key.pub
October, 7 -- The
lp would be highly appreciated.
matthias
--
Matthias Apitz, ✉ g...@unixarea.de, http://www.unixarea.de/ +49-176-38902045
Public GnuPG key: http://www.unixarea.de/key.pub
October, 7 -- The GDR was different: Peace instead of Bundeswehr and wars,
Druschba
instead of Nazis, to live instead
eader()
...
If there would be any OpenSource RFID reader software, I could write the
required interface in C or C++ on top of its API.
Any ideas or comments on this?
Thanks
matthias
--
Matthias Apitz, ✉ g...@unixarea.de, ⌂ http://www.unixarea.de/ 📱
+49-176-38902045
signature.asc
Description: PGP signature
On Friday, 30 June 2017 12:46:06 CEST, Hans Petter Selasky
wrote:
On 06/30/17 12:30, Matthias Apitz wrote:
El día viernes, junio 30, 2017 a las 08:34:21a. m. +0200,
Matthias Apitz escribió:
Hi,
Thanks for the hint. I disabled the three entries for uhci,
ohci and ehci:
# USB support
El día viernes, junio 30, 2017 a las 08:34:21a. m. +0200, Matthias Apitz
escribió:
> Hi,
>
> Thanks for the hint. I disabled the three entries for uhci, ohci and ehci:
>
> # USB support
> options USB_DEBUG # enable debug msgs
> # devic
ci# OHCI PCI->USB interface
# deviceehci# EHCI PCI->USB interface (USB 2.0)
device xhci# XHCI PCI->USB interface (USB 3.0)
device usb # USB Bus (required)
device ukbd# Keyboard
devi
the rule is: When XHCI is probed as ugen0.1 and later as uhub0, all is
fine; else it fails.
Any ideas on this? What makes the boot differ in this order?
Thanks
matthias
--
Matthias Apitz, ✉ g...@unixarea.de, ⌂ http://www.unixarea.de/
Public GnuPG key: http://www.unixarea.de/key.pub
signature.asc
Description: PGP signature
El día miércoles, mayo 10, 2017 a las 09:39:03a. m. +0200, Matthias Apitz
escribió:
> Alexander,
>
> Thanks for your explanations. I will opt for the Omnikey 6121 Mobile USB
> and see what I can do with it. It sells for around 20 euro, shipping
> to .de included.
Hello,
Sinc
only see in msg4 that there is nothing to see :-)
matthias
--
Matthias Apitz, ✉ g...@unixarea.de, ⌂ http://www.unixarea.de/ ☎
+49-176-38902045
Public GnuPG key: http://www.unixarea.de/key.pub
8. Mai 1945: Wer nicht feiert hat den Krieg verloren.
8 de mayo de 1945: Quien no festeja perd
Until now, and I tried a lot of time, I could never catch the situation
"USB device connected before power-on, device not detected at boot" when
booting with verbose messages, and I wanted to have it to get more
messages. Maybe it's just some kind of timing issue...
matthi
try this at home with my E6330 Dell laptop.
> There are some debug knobs under:
>
> sysctl -a hw.usb |grep debug
>
> which you might turn on and compare the output from the two systems, like:
>
> sysctl hw.usb.uhub.debug=16
Can I set this as well in loader.conf f
El día jueves, mayo 11, 2017 a las 08:58:44a. m. +0200, Matthias Apitz escribió:
> > El día martes, mayo 09, 2017 a las 09:36:37p. m. +0200, Alexander Leidinger
> > escribió:
> >
> > > It's not FreeBSD which needs the support. gnupg comes with the
> > &
0:00,01 /usr/local/sbin/pcscd
25044 1 S+ 0:00,01 /usr/local/sbin/pcscd
What I have done wrong?
matthias
--
Matthias Apitz, ✉ g...@unixarea.de, ⌂ http://www.unixarea.de/ ☎
+49-176-38902045
8. Mai 1945: Wer nicht feiert hat den Krieg verloren.
El día martes, mayo 09, 2017 a las 09:36:37p. m. +0200, Alexander Leidinger
escribió:
> Quoting Matthias Apitz (from Tue, 9 May 2017
> 11:47:29 +0200):
>
> > Hello,
> >
> > The GnuPG project has a list of supported (USB) card readers:
> >
> > https://g
.
matthias
--
Matthias Apitz, ✉ g...@unixarea.de, ⌂ http://www.unixarea.de/ ☎
+49-176-38902045
___
freebsd-usb@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-uns
: 40.000MB/s transfers
Apr 13 10:47:24 c720-r292778-amd64 kernel: da0: 960MB (1966080 512 byte sectors)
Apr 13 10:47:24 c720-r292778-amd64 kernel: da0: quirks=0x2
but the command
# usbconfig -d ugen0.3 dump_info
just hangs forever. What do I wrong?
matthias
--
Matthias Apitz, ✉ g...@unixarea.de
orrect way to shutdown the 5V
> > provided via USB to the device?
> >
>
> Not all USB ports support power off.
I will go and look for a cable with type-A receptacle and type-A plug and
will cut the red line of pin 1 to see if this let the phone still asume
that someting is
at is the correct way to shutdown the 5V
provided via USB to the device?
Thanks
matthias
--
Matthias Apitz, g...@unixarea.de, http://www.unixarea.de/ +49-170-4527211
"Wenn der Mensch von den Umständen gebildet wird, so muß man die Umstände
menschlich bilden."
"Si el hombr
dr inside the Ubuntu,
maybe an DHCP-server on the host side is to much.
Thanks for your help, Oliver and Hans
matthias
--
Matthias Apitz, g...@unixarea.de, http://www.unixarea.de/ +49-170-4527211
"Wenn der Mensch von den Umständen gebildet wird, so muß man die Umstände
menschlich bi
El día Monday, March 30, 2015 a las 11:00:25AM +0200, Hans Petter Selasky
escribió:
> On 03/30/15 10:57, Matthias Apitz wrote:
> >
> > Hello,
> >
> > I have a new cellphone, the BQ Aquaris E 4.5 Ubuntu Edition, i.e. it
> > runs Ubuntu 14.10.
> >
> >
thias
- Forwarded message from Oliver Grawert -
Date: Mon, 30 Mar 2015 10:47:17 +0200
From: Oliver Grawert
To: ubuntu-ph...@lists.launchpad.net
Subject: Re: [Ubuntu-phone] Ethernet through USB
X-Mailer: Evolution 3.10.4-0ubuntu2
hi,
Am Montag, den 30.03.2015, 10:34 +0200 schrieb Matthias
0 00 01 00 -- -- -- -- -- -- -- -- |..U.|
frame[1] READ 1 bytes
flags 0x12
10:48:48.010314 usbus0.3
DONE-CTRL-EP=0080,SPD=FULL,NFR=2,SLEN=4,IVAL=0,ERR=0
frame[0] WRITE 8 bytes
frame[1] READ 1 bytes
43 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- |C |
f
*** \n",28) = 28 (0x1c)
write(2,"Could not establish initial cont"...,48) = 48 (0x30)
In messages on cam attach it says:
Feb 8 09:41:06 c720-r276659 kernel: ugen0.3: at usbus0
Feb 8 09:41:06 c720-r276659 root: Unknown USB device: vendor 0x04a9 product
0x308
s
$ date ; cat fra.ps > /dev/unlpt0 ; date ; cat fra.ps > /dev/ulpt0 ; date
Sat Jun 21 11:43:12 CEST 2014
Sat Jun 21 11:58:48 CEST 2014
Sat Jun 21 12:14:51 CEST 2014
i.e. takes around 15 minutes, regardeless of the used device, 3.2K per
second.
Just for the records
ces, /dev/ulpt0 and /dev/unlpt0. I just
concatenated a PostScript file to them as
# cat psfile > /dev/ulpt0
What does the above mean?
I have to add it to /boot/loader.conf or /etc/sysctl.conf.
Thanks for you patient help.
matthias
--
Matthias Apitz | /"\ ASCII
nearly anything about Windows and would
need a hint for a at least working traffic sniffer.
Thx
matthias
--
Matthias Apitz | /"\ ASCII Ribbon Campaign:
E-mail: g...@unixarea.de | \ / - No HTML/RTF in E-mail
WWW: http://www.unixarea.de/ | X- No propriet
ulpt_watchdog: debugging ulpt.c:
ulpt_watchdog()
Thx
matthias
--
Matthias Apitz | /"\ ASCII Ribbon Campaign:
E-mail: g...@unixarea.de | \ / - No HTML/RTF in E-mail
WWW: http://www.unixarea.de/ | X- No proprietary attachments
phone: +49-170-4527211
g number:
1
Jun 16 12:02:24 La-Habana kernel: ulpt0: using bi-directional mode
Jun 16 12:02:24 La-Habana kernel: ulpt_watchdog: debugging ulpt.c:
ulpt_watchdog() skiped read status
Thx
matthias
--
Matthias Apitz | /"\ ASCII Ribbon Campaign:
E-mail: g...@unixarea.de
ulpt_attach: sc=0xc5839100
Jun 16 11:16:07 La-Habana kernel: ulpt0: on usbus1
Jun 16 11:16:07 La-Habana kernel: ulpt_attach: setting alternate config number:
1
Jun 16 11:16:07 La-Habana kernel: ulpt0: using bi-directional mode
Jun 16 11:16:07 La-Habana kernel: ulpt_watchdog: debugging ulpt.c:
ulpt_wat
tchdog() skiped read status
Jun 16 10:27:57 La-Habana last message repeated 6 times
Jun 16 10:27:57 La-Habana kernel: ugen1.2: at usbus1
(disconnected)
Jun 16 10:27:57 La-Habana kernel: ulpt0: at uhub1, port 1, addr 2 (disconnected)
Jun 16 10:27:57 La-Habana kernel: ulpt_detach: sc=0xc5529a80
Thx
rectional mode
Jun 16 08:44:49 La-Habana kernel: ulpt_watchdog: debugging ulpt.c:
ulpt_watchdog() skiped read status
Jun 16 08:44:53 La-Habana last message repeated 4 times
Jun 16 08:44:54 La-Habana kernel: ulpt_watchdog: debugging ulpt.c:
ulpt_watchdog() skiped read status
matthi
Jun 16 07:31:40 La-Habana kernel: ulpt0: using bi-directional mode
Jun 16 07:31:40 La-Habana kernel: ulpt_watchdog: debugging ulpt.c:
ulpt_watchdog() skiped read status
Thx
matthias
--
Matthias Apitz | /"\ ASCII Ribbon Campaign:
E-mail: g...@unixarea.de | \ /
s. Then you can sniff the USB
> traffic in the VM USB host.
Hi,
This is for administrative reasons not an option in my office and at
home I do not have Win*.
matthias
--
Matthias Apitz | /"\ ASCII Ribbon Campaign:
E-mail: g...@unixarea.de | \ / - No HTML/R
I know, our list deals with FreeBSD
software, but it is some kind of re-engineering why Win7 works with a
device and FreeBSD does not :-)
Thanks
matthias
--
Matthias Apitz | /"\ ASCII Ribbon Campaign:
E-mail: g...@unixarea.de | \ / - No HTML/RTF in E-mail
W
and Win
recogniced the model of the printer at the other end of the cable fine
as HP LasetJet 4ML and prints ofc fine too. I'm surprised, btw, that the
toner after so many years in the cellary is still fine :-)
And now?
>
> Did you dump the complete device and configuration descripto
et you know, have to look in my office for both.
> Did you dump the complete device and configuration descriptor?
I did send in this thread yesterday the output of
# usbconfig -u 1 -a 2 dump_device_desc
Anything else?
Thanks for your kind help.
matthias
--
Matth
Jun 2 16:58:41 La-Habana last message repeated 7 times
Jun 2 16:58:42 La-Habana kernel: ulpt_write_callback: state=0x0 actlen=0
Jun 2 16:58:42 La-Habana kernel: ulpt_status_callback: error=USB_ERR_TIMEOUT
Thanks
matthias
--
Matthias Apitz | /"\ ASCII Ribbon Campaig
erm
# date > /dev/unlpt0
Thanks
matthias
PD: I saw another thread on October 28, 2013 with the same device id's
while googling, in which you tried help out; could not find a final
result; and the situation was not the same, I think.
--
Matthias Apitz | /"\
.ps > /dev/unlpt0
cat: stdout: Input/output error
Any ideas?
matthias
--
Matthias Apitz | /"\ ASCII Ribbon Campaign:
E-mail: g...@unixarea.de | \ / - No HTML/RTF in E-mail
WWW: http://www.unixarea.de/ | X- No proprietary attachments
phone: +49-170-4527211
ne containing Skype, in
the probing window is text from some other desktop visible, just as
X area would not get updated there...
Any ideas what could be wrong or where to look deeper? Thanks
matthias
--
Matthias Apitz | /"\ ASCII Ribbon Campaign: www.asciirib
at the patch is addressing some audio problem, which I do not
have, and it would be good to know if it's working, i.e. if my problem
is a local one more or a general within /head. Thanks
matthias
--
Matthias Apitz | /"\ ASCII Ribbon Campaign: www.asciiribb
systems
of r235646, Skype is fine with the cams I have, on r250588 my cams are
working with pwcview(1) but not with Skype.
What can we do to debug this?
We should move this thread to freebsd-multimedia only, I suggest.
Thanks
matthias
--
Matthias Apitz | /"\ ASCII Ri
Hi,
Any comments about this threat concerning usage of USB devices in the
emulator wine:
http://www.winehq.org/pipermail/wine-users/2012-September/106983.html
Thanks in advance
matthias
--
Matthias Apitz | /"\ ASCII Ribbon Campaign: www.asciiribbon.org
E-ma
ompletely broken and the log of the
ppp chat proofs this;
matthias
--
Matthias Apitz
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e - w http://www.unixarea.de/
UNIX since V7 on PDP-11 | UNIX on mainframe since ESER 1055 (IBM /370)
UNIX on x86 since SVR4
El día Friday, April 20, 2012 a las 04:18:46PM +0200, Matthias Apitz escribió:
> > Hi,
> >
> > You need to patch the latest git:
> >
> > git clone git://git.openezx.org/dfu-util.git
> >
> > And build that.
Hello,
I have spent some hours reading s
matthias
>
> --HPS
> ___
> freebsd-usb@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-usb
> To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"
k #9 succeeded at 287 (offset -4 lines).
Hunk #10 succeeded at 931 (offset -18 lines).
2 out of 10 hunks failed--saving rejects to main.c.rej
done
was your diff against the original dfu-util-0.5.tar.gz?
Thanks
matthias
--
Matthias Apitz
e - w http://www.unixarea.de/
UNIX since V7 on PDP-
rSubType = 0x07
RAW dump:
0x00 | 0x09, 0x21, 0x07, 0x00, 0xff, 0x00, 0x10, 0x00,
0x08 | 0x01
--
Matthias Apitz
e - w http://www.unixarea.de/
UNIX since V7 on PDP-11, UNIX on mainframe since ESER 1055 (IBM /370)
UNIX on x86 since SVR4.2 UnixWare 2.1.2, FreeBSD since 2
in Runtime Mode, send DFU detach request...
Resetting USB...
libusb_set_configuration(_rt_dif.dev_handle, 1)
_rt_dif.dev_handle 28449d80
Opening USB Device...
No such Alternate Setting: "rootfs"
Thanks
matthias
--
Matthias Apitz
e - w http://www.unixarea.de/
UNIX since V7 on PDP-11, U
"dif->dev_handle %08x\n",
dif->dev_handle);
for reset it uses _rt_dif.dev_handle, and you made me add an operation
with dif->dev_handle, is this correct?
anyway:
Resetting USB...
doing libusb_set_configuration(dif->dev_handle, 1)
dif->dev_handle 28449f00
Opening USB Device...
No su
added a sleep(2) after it, but the
problem remains:
...
Resetting USB...
doing libusb_set_configuration(dif->dev_handle, 1)
Opening USB Device...
No such Alternate Setting: "rootfs"
Thanks
matthias
--
Matthias Apitz
e - w http://www.unixarea.de/
UNIX since V7 on PDP-11,
$ make
> >
> > but the resulting dfu-util somehow does not work (while the 0.1 version
> > works fine on the same FreeBSD host and the same Freerunner):
> >
> > # ~/dfu-util-0.5/src/dfu-util -d 0x1d50:0x5119 -a rootfs -R -D
> > shr-image-om-gta02-20120413222611.r
uest...
Resetting USB...
Opening USB Device...
No such Alternate Setting: "rootfs"
#
as well using "6" for "rootfs" does not work...
Any comments or hints what the problem of 0.5 with FreeBSD libusb could
be? Thanks
matthias
ug mode I learned that they now have changed
the vendor and product ID to "0x0525" and "0xa4a2" which the Linux kernel
of the Freerunner presents to the FreeBSD host; and after updating the
values to the new ones all is fine again;
do you know why and how Linux this
El día Monday, April 16, 2012 a las 03:27:45PM +0200, Hans Petter Selasky
escribió:
> On Monday 16 April 2012 10:54:43 Matthias Apitz wrote:
> > El día Monday, April 16, 2012 a las 06:14:31AM +0200, Matthias Apitz
>
> > > Apr 16 05:50:17 tinyCurrent kernel: cdce0: on
>
El día Monday, April 16, 2012 a las 06:14:31AM +0200, Matthias Apitz escribió:
>
> Hello,
>
> I have updated my Linux based cellphone from Linux 2.6.29-rc3 to 2.6.39.4;
>
> with the old software version on same hardware TCP/IP over interface ue0
> worked fine; on attach it
(192.168.7.2): 56 data bytes
ping: sendto: Host is down
ping: sendto: Host is down
The FreeBSD kernel is r21: Thu Oct 28 10:56:32 CEST 2010;
What is the problem and what does the marked messages mean?
Thanks
matthias
--
Matthias Apitz
t +49-89-61308 351 - f +49-89-61308 399 - m +49
do no fully understand the problem; the man page stv06xx(4) installed
by the webcamd port says that the driver stv06xx webcamd driver for USB
cameras supports this cam:
VendorID:ProductID Device
...
046d:08f0 Logitech QuickCam Messenger
Why do we need som
El día Tuesday, December 20, 2011 a las 05:43:55PM +0100, Hans Petter Selasky
escribió:
> On Tuesday 20 December 2011 15:40:22 Matthias Apitz wrote:
> > idVendor = 0x046d
> > idProduct = 0x08f0
>
> Grep for the 4-digit hex-values above in the webcamd source code
"Logitech Quickcam messenger".
Thanks
matthias
--
Matthias Apitz
e - w http://www.unixarea.de/
UNIX since V7 on PDP-11, UNIX on mainframe since ESER 1055 (IBM /370)
UNIX on x86 since SVR4.2 UnixWare 2.1.2, FreeBSD since 2.2.5
___
f
rs are missing and so on; that's
why I wanted to make dump(8) nackups of them, to restore them from time
to time; I will drop the idea and will just make dd(1) backups of the
full /dev/da0;
thanks
matthias
--
Matthias Apitz
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e
.000 dirs and 200.000 files
(because of complete /usr/src and /usr/obl files incl. .svn dirs);
Is this (50.000 x mkdir(2)) to much for USB?
matthias
--
Matthias Apitz
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e - w http://www.unixarea.de/
UNIX since V7 on PDP-11 | UNIX on ma
nt/foo",0777) = 0 (0x0)
9.775744404
sigprocmask(SIG_BLOCK,SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,0x0)
= 0 (0x0)
it takes so long to do m
the problem; the problem is the poor performance of
restore(8); the dd(1) was just to see if the USB key performs fast
enough in general; please read my post again :-)
Thanks
matthias
--
Matthias Apitz
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e - w http://www.unixarea.
this is after an hour or so: only 42 MBytes are written now;
Any idea, what is broken with this?
Thanks
matthias
--
Matthias Apitz
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e - w http://www.unixarea.de/
UNIX since V7 on PDP-11 | UNIX on mainframe since ESER 1055
in 9-CURRENT? Thanks
matthias
--
Matthias Apitz
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e - w http://www.unixarea.de/
___
freebsd-usb@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To
wn USB device: vendor 0x0421 product
> 0x054d bus uhub4
Hi,
The message means, that no other diver attaches to this vendor/product
ID of your device.
What the Nokia cell phone is offering via USB? Charging only? Serial
access to the SIM? TCP over USB (like my Openmoko FreeRunner does)?
El día Monday, July 11, 2011 a las 01:59:05AM +0200, Torfinn Ingolfsen escribió:
> On Sun, 10 Jul 2011 20:13:17 +0200
> Matthias Apitz wrote:
>
> >
> > CFLAGS='-I/usr/local/include' CPPFLAGS='-I/usr/local/include'
> > LDFLAGS='-L/usr/loc
> > Before configure.
>
> I tried (I'm using /bin/sh)
> CFLAGS="-I/usr/local/include" ./configure
> env CFLAGS="-I/usr/local/include" ./configure
CFLAGS='-I/usr/local/include' CPPFLAGS='-I/usr/local/include'
LDFLAGS='-L/usr/local/lib
El día Monday, March 14, 2011 a las 12:04:04PM +0100, Matthias Apitz escribió:
> El día Monday, March 14, 2011 a las 11:53:56AM +0100, Hans Petter Selasky
> escribió:
>
> > You could try with kopete from ports.
> >
> > --HPS
>
> I could not build kopete from
mostly I would
need it in Skype where it only gives a black picture at the moment while
testing the cam in the Skype options dialog.
matthias
--
Matthias Apitz
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e - w http://www.un
El día Monday, March 14, 2011 a las 08:46:11AM +0100, Matthias Apitz escribió:
>
> Hello,
>
> My kernel is 9-CURRENT r21 (as of October 2010) and I've updated
> the ports multimedia/webcamd and multimedia/cuse4bsd to the latest versions:
>
> # pkg_info | fgrep
ld in one.
matthias
--
Matthias Apitz
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e - w http://www.unixarea.de/
___
freebsd-usb@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, sen
El día Tuesday, January 11, 2011 a las 09:54:51AM +0100, Matthias Apitz
escribió:
>
> Hello,
>
> Inserting a microSD card (with an adapter) into my Dell M4400 laptop
> gives no messages in /var/log/messages, even after kldload'ing mmc.ko
> and mmcsd.ko... What I am m
is there some documentation of the parameters REVLO, REVHI and QUIRK?
Thx
matthias
--
Matthias Apitz
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e - w http://www.unixarea.de/
___
freebsd-usb@freebsd.org mailing list
http://li
: Attached to scbus0
Jan 23 18:11:19 tinyCurrent kernel: da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
Jan 23 18:11:19 tinyCurrent kernel: da0: Fixed
Direct Acc ess SCSI-2 device
Jan 23 18:11:19 tinyCurrent kernel: da0: 40.000MB/s transfers
Let me know if you need more debug output
Thx
and if I pull out the USB cable and plug it into my EeePC sitting next
to the Acer, da(4) attaches fine ... but all the other laptops are
running a 8.x version;
matthias
--
Matthias Apitz
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e - w http://www.unixarea.de
bcdDevice = 0x0108
iManufacturer = 0x0002
iProduct = 0x0003
iSerialNumber = 0x0001
bNumConfigurations = 0x0001
# camcontrol rescan all
Re-scan of bus 0 was successful
--
Matthias Apitz
t +49-89-61308 351 - f +49-89-61308 399 - m
El dÃa Saturday, January 22, 2011 a las 02:49:36PM +0100, Hans Petter Selasky
escribió:
> On Saturday 22 January 2011 11:42:39 Matthias Apitz wrote:
> > Drive XS 1.00> Fixed Direct Access SCSI-2 device Jan 22 09:23:11
> > tinyCurrent kernel: da0: 40.000MB/s transfers
&
: 255H 63S/T 182401C)
The kernel is 9-CURRENT r21 (October 2010). Any ideas?
matthias
--
Matthias Apitz
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e - w http://www.unixarea.de/
___
freebsd-usb@freebsd.org mailing list
http
, but this is
perhaps a bit overkill...
I will buy a 2nd key and restore the dd(1)'ed file to it with dd(1)...
matthias
--
Matthias Apitz
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e - w http://www.unixarea.de/
___
of random error
it whould be more caotic, or?
matthias
--
Matthias Apitz
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e - w http://www.unixarea.de/
___
freebsd-usb@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/
El día Friday, November 19, 2010 a las 05:42:57PM -0700, Warren Block escribió:
> On Fri, 19 Nov 2010, Matthias Apitz wrote:
> > El d?a Friday, November 19, 2010 a las 12:39:13PM -0700, Warren Block
> > escribi?:
> >
> >>> Should I overwrite the full USB key f
1 - 100 of 127 matches
Mail list logo