Hello Michael and Tom,
When I install the SBLIVE 5.1 and try the SBLIVE 5.1 driver for DOS
(SBINIT.COM), it fail to load the large file to the upper memory
(according to the README, should be XMS).
I switch back to M$-DOS HIMEM+EMM386 it works! Then maybe the driver
ask for memory but fail to get
Johnson Lam schreef:
Hello Michael and Tom,
When I install the SBLIVE 5.1 and try the SBLIVE 5.1 driver for DOS
(SBINIT.COM), it fail to load the large file to the upper memory
(according to the README, should be XMS).
I switch back to M$-DOS HIMEM+EMM386 it works! Then maybe the driver
ask for mem
On Mon, 19 Jul 2004 13:59:22 +0200, you wrote:
Hi Bernd,
I use a MS-DOS 6.22 floppy (Bart's Network boot) to boot and run the
SBINIT, SBSET and it works.
>static:
>*MSDOS kernel (io.sys/msdos.sys)
>*MS command.com
>*SB-Live! driver(s)
SBLive driver didn't change anything, just swap between MS-D
On Mon, 19 Jul 2004 13:59:22 +0200, you wrote:
Hello Bernd, Michael and Tom,
>approving the FD-EMM386 under an all-MS environment is step #1, and then
>getting the sound driver to work under FreeDOS is step2
Got the answer. Sorry it's not "full" test combination ...
UMBPCI automatically disqua
At 10:40 PM 7/19/2004 +0800, you wrote:
error: Could not allocate code/patch RAM below 4 Mbyte boundary. Try
loading SBEINIT.COM before SMARTDRV.EXE or minimizing VDISK
RAM.
We had a short thread on this recently, but basically you have to give the
SB memory in the 4M range. That me
Hello everyone. Just subscribed to the mailing lists again.
I haven't followed development for some time now, and I must say that
the progress made since I've been gone is quite impressive. All the
folks here should be proud.
As for me, I'm going to just be lurking for a while. I have a proje
On Mon, 19 Jul 2004 10:07:59 -0500, you wrote:
Hi Michael,
>>error: Could not allocate code/patch RAM below 4 Mbyte boundary. Try
>>loading SBEINIT.COM before SMARTDRV.EXE or minimizing VDISK
>>RAM.
>
>We had a short thread on this recently, but basically you have to give the
>SB
On Mon, 19 Jul 2004 15:04:01 -0400, you wrote:
Hi Pat,
>Hello everyone. Just subscribed to the mailing lists again.
Glad to see you back!
>As for me, I'm going to just be lurking for a while. I have a project
>in mind which may be based on FreeDOS, but haven't come to any decisions
>yet.
>
At 09:34 AM 7/20/2004 +0800, Johnson Lam wrote:
>>error: Could not allocate code/patch RAM below 4 Mbyte boundary. Try
>>loading SBEINIT.COM before SMARTDRV.EXE or minimizing VDISK
>>RAM.
>
>We had a short thread on this recently, but basically you have to give the
>SB memory in the