yeap , found it!!
ISDN:
Tue Jan 8 13:35:49 2002
User-Name = "d_dan23"
NAS-IP-Address = 194.102.xxx.xxx
NAS-Port-Id = 206
NAS-Port-Type = ISDN
Acct-Authentic = RADIUS
Analogue:
Tue Jan 8 09:12:27 2002
User-Name = "raif_vs"
NAS-IP-Address
No it's not. It's copy&paste from the PR 4000 web page access control.
1/8/02 9:03:33 PM, Chris Parker <[EMAIL PROTECTED]> wrote:
>At 09:35 AM 1/8/2002 +0200, deejaylyon wrote:
>>NAS sends the port attribute, but it's the same.
>
>Port-Type is different than NAS-Port.
>
>You should look at the d
I'm currently using FreeRadius - just upgraded to 0.4 - to
authenticate users with account info in /etc/passwd and
/etc/shadow.
Currently all I use is a default entry in
/usr/local/etc/raddb/users.
This works fine.
However, I'm testing a setup where as much information as possible will
go into a
I was able to get the freeradius server do and EAP authentication for a
wireless network. I had seen some people on the mailing list ask about
this, but could not find where anyone had gotten it to work.
I am using a Cisco 350 Access Point a Cisco Wireless card on a laptop
running windows XP.
I have freeradius-0.4 with postgresql 7.1.2 I've seen it insert an
accouting_stop record into the database if it cannot match the session id
with a prexsisting start record. Usually this happens when an exsisting
dialup user is connected and you restart the radiusd process
-Original Message-
"Leonardo Mahler" <[EMAIL PROTECTED]> wrote:
> I'm using freeradius to collect accounting of VoIP Calls from Cisco's =
> gateways.
> I'm receiving this strange accounting from just one gw:
>
> Tue Dec 11 10:04:08 2001=20
> NAS-IP-Address =3D 208.239.166.99=20
> NAS-Port-Type =3D Async=20
> User-
At 09:35 AM 1/8/2002 +0200, deejaylyon wrote:
>NAS sends the port attribute, but it's the same.
Port-Type is different than NAS-Port.
You should look at the detail files that are recorded. What you posted
is not the normal accounting detail format ( or anything I recognize ).
-Chris
--
\\\
Hello all!
I'm using freeradius to collect accounting of VoIP Calls
from Cisco's gateways.
I'm receiving this strange accounting from just one
gw:
Tue Dec 11 10:04:08 2001 NAS-IP-Address =
208.239.166.99 NAS-Port-Type = Async User-Name =
"\377\377\377\377\377\377\377\377\377\377\377\37
I am working with Frreradius 0.4 on a linux server (Suse 7,2) and I have
also installed a PostgreSQL and OpenLDAP there. I am usin LDAP for
atuhtetication and PostgreSQL for accounting. I am trying to test the
Frreradius on a huge environment with multiple NAS and services, so I think
this w
That's my sql.conf... works with posgresql 7.1, radius 0.3 and
cisco nas 3620
--
cron-ripe
#
# Configuration for the SQL module.
#
sql {
# Database type
# Current supported are: rlm_sql_mysql, rlm_sql_postgresql, rlm_sql_iodbc,
rlm_sql_oracle
driver = "rlm_sql_
"Andrei Bogomolov" <[EMAIL PROTECTED]> wrote:
> I havent seen this feature in docs.
>
> Tell please, will it work on FreeRdaius-0.3 or I should upgrade to 0.4?
Upgrade to the latest CVS snapshot.
> And is it possible to use regexp operator this way?
Yes.
Alan DeKok.
-
List info/subsc
Bas Haakman <[EMAIL PROTECTED]> wrote:
> The pairs do not match error is because if you don't have an
> operator collum in your table it will default to "==".
>
> The operator collum isn't it in the default sql scheme which comes
> with freeradius.
Note that the latest CVS snapshot has been fi
For those interested in a great firewall solution check out:,
http://sourceforge.net/projects/ipcop
chuck
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Aleksandr Kuzminsky <[EMAIL PROTECTED]> wrote:
> I have two RADIUS servers and single Mysql database for
> authorization and accounting. Also I use rlm_counter module
> for authorization users depending their total AccSessionTime.
> And thats my question.
> Two radius servers store their own count
Igor Chen <[EMAIL PROTECTED]> wrote:
> sorry for interrupting, but are you radius developer?
Uh.. yes.
> Than i should also say that sql.conf that comes with radius 0.3 (and
> 0.4) works finely only with mysql... (ex. function unix_timestamp()
> is mysql function). If you want, i can give my w
deejaylyon <[EMAIL PROTECTED]> wrote:
> NAS sends the port attribute, but it's the same.
>
> Analogue calls:
> Dec 26 14:20:37 - 14:45:29 port 214:pr 194.102.181.1740:24
> Dec 27 16:30:02 - 16:47:37 port 221:pr 194.102.181.1810:17
> Dec 27 16:58:38 - 17:06:17 port 226:pr 194.1
At 10:56 AM 1/8/2002 +0800, Rubby wrote:
>I use freeRadius + Oracle,
>once I dial to NAS, the authorize and authenticate passed,and then radiusd
>-X printf
>information below:
>rad_recv: Accounting-Request packet from host 192.168.0.111:2001, id=4,
>length=102
>Received Accounting-Request packet
On Tue, 8 Jan 2002, Andrei Bogomolov wrote:
> Subject: Re: anyone uses sql authorization with radius???
>
> I havent seen this feature in docs.
;) sources are the best documentation..
Unfortunately documentation not full for freeradius.
for example, I have not found format of
attributes with 'tim
Here's some new info:
Users connected analogue show up like this:
Md=4 V90 28800 45333 LAPM/V42Bis
Md=7 V34 33600 33600 LAPM/V42Bis
while someone connected via ISDN shows up like this:
b-channel 6, incoming call not defined
Any ideas?
1/8/02 9:35:23 AM, deejaylyon <[EMAIL PROTECTED]> wrote:
>N
I havent seen this feature in docs.
Tell please, will it work on FreeRdaius-0.3 or I should upgrade to 0.4?
And is it possible to use regexp operator this way?
- Original Message -
From: "Bas Haakman" <[EMAIL PROTECTED]>
To: "freeradius users" <[EMAIL PROTECTED]>
Sent: Tuesday, January
On Tue, 8 Jan 2002, Aleksandr Kuzminsky wrote:
> > Tell me please what table 'radgroupcheck' for? when i try to insert any
> > attribute in it i always get error 'pairs do not match' :-\
> > Anyone can give an example? please!
> Yes, I'm using mysql for users authorization.
> radgroupcheck is use
Hi,
The pairs do not match error is because if you don't have an
operator collum in your table it will default to "==".
The operator collum isn't it in the default sql scheme which comes
with freeradius.
So create something like this (in mysql it works):
CREATE TABLE radcheck (
id int(10) DE
Hello.
Recently I have installed freeradius with mysql.
I have two RADIUS servers and single Mysql database for
authorization and accounting. Also I use rlm_counter module
for authorization users depending their total AccSessionTime.
And thats my question.
Two radius servers store their own counte
thanks
can you point me some URL which can help me
thanks
- Original Message -
From: Esken, Christian, VP-TS, CE <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, January 08, 2002 2:57 PM
Subject: AW: how to do i authenticate using NAS
Hi,
only accept the user, if the NAS-P-Ad
> Tell me please what table 'radgroupcheck' for? when i try to insert any
> attribute in it i always get error 'pairs do not match' :-\
> Anyone can give an example? please!
Yes, I'm using mysql for users authorization.
radgroupcheck is used to check attributes for users belonging to
the same grou
On Mon, 7 Jan 2002 [EMAIL PROTECTED] wrote:
> Chris Parker <[EMAIL PROTECTED]> wrote:
> > At 05:22 PM 1/7/2002 +0200, Kostas Kalevras wrote:
> >
> > >We *really* need to do an sql_set_user for Update packets or change
> > >sql.conf to read UserName = '%{User-Name}'
> >
> > I agree with the former
On Mon, 7 Jan 2002, Chris Parker wrote:
> At 11:51 AM 1/5/2002 +0200, Igor Chen wrote:
> >Seems that radius can't reach sql-user-name when updating session with
> >Alive record...
> >---
> >rlm_sql: Reserving sql socket id: 4
> >query: UPDATE radacct SET FramedIPAddress = '217.12.196.221' WHERE
>
Hi,
only accept the user, if the NAS-P-Address does not match: For example I
use:
user1 NAS-IP-Address == 111.22.3.44 , Password == passwd
BTW: Look at the dictionary* files, they will tell you a lot.
And looking at the docs and the examples does help a lot, too. ;-)
Christian
> -Ursprüngl
On Mon, 7 Jan 2002, pavesi wrote:
> I noticed that there was some earlier posts about getting ldap + chap support
> working with freeradius. I currently am using .4 of freeradius and have it
> *almost*
> working..
> Whats weird when running in debug mode is that the rlm_ldap processes the
> co
FreeRadius Can't accept a packet that
issused from IAS
The packet is Access-Request
. It content a EAP message
I have no idea where is the problem
The below is what I have experiment
include Source code , packet content
pls , give me a help
When present in an Access-Request packet,
Mes
30 matches
Mail list logo