Fr2 is running under pfsense but iu know is using freebsd as kernel.
But the funny thing is this:
/usr/share/misc(10): file termcap.db
termcap.db: Berkeley DB 1.85 (Hash, version 2, native byte-order)
Now fr2.
Quote
file /var/log/radacct/timecounter/db.daily
, Jan 3, 2013 at 6:57 AM, Periko Support
pheriko.supp...@gmail.com wrote:
Hi.
I'm trying to understand the logic fr2 for counters, I'm working with
modules counter and sql_counter.
a) Once u setup a user:
Max-Daily-Session := 900
Where he saves this info?
b) What formula he use to calculate
Hi.
I'm trying to understand the logic fr2 for counters, I'm working with
modules counter and sql_counter.
a) Once u setup a user:
Max-Daily-Session := 900
Where he saves this info?
b) What formula he use to calculate the user time available?
Any info about will be appreciated, thanks!!!
-
Hi guys.
Exist a way to read freeradius db files?
db.daily, etc, etc.
This are berkeley db files or what type of are those?
I'm using flat files not sql settings.
FR 2.x, thanks!!!
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
On Mon, Nov 12, 2012 at 2:25 AM, Fajar A. Nugraha l...@fajar.net wrote:
On Mon, Nov 12, 2012 at 2:29 PM, Dirk van der Walt
dirkvanderw...@gmail.com wrote:
Although rlm_counter is primarily used as an introduction here to
better understand the counter modules, the next section covers the
On Sun, Nov 11, 2012 at 5:45 AM, Alan DeKok al...@deployingradius.com wrote:
Periko Support wrote:
On Sat, Nov 10, 2012 at 6:27 AM, Alan DeKok al...@deployingradius.com
wrote:
What does the debug output say?
..
This is the output:
You've given a lot of information, which is nice
On Sat, Nov 10, 2012 at 6:27 AM, Alan DeKok al...@deployingradius.com wrote:
Periko Support wrote:
This works, but I would like to understand, I can try that steps a
lot times and every time it give me the same result: 1770, doesn't
suppose that every time I run the same steps the counter
My Fault, this message wasn't finish, I will continue here.:
On Fri, Nov 9, 2012 at 1:09 PM, Periko Support
pheriko.supp...@gmail.com wrote:
Hi.
Centos 5.x
FreeRadius 2.1.1.
I'm reading the book freeradius beginners Guide chapter 6: accounting.
Page 139.
Amount of Time.
I have
Thanks a LOT Alan for your answer.
The radius works very well. It auths the MAC's locally and resend the
windows domains users query to a Windows NPS Server.
Toni
2011/11/14 Alan Buxey a.l.m.bu...@lboro.ac.uk
Hi,
I a newbie freeradius user and I have a new problem. I have a switch
that
] Got reply 2
failed!
2011/11/13 Alexandre Chapellon a.chapel...@horoa.net
Are you running freeradius with '-X'?
If not try it, you should get more debug.
regards
Le 12/11/2011 20:35, IT Support a écrit :
Good afternoon
I'm a newbie with freeradius and I'm trying to configure a radius
Thanks
I will try it, but debian doesn't have the binary package with the
latest version and I do compile the sources.
I will be send us the results.
Toni
2011/11/14 Phil Mayers p.may...@imperial.ac.uk:
On 11/14/2011 09:04 AM, IT Support wrote:
Hi
Thanks for your answer.
I call
Hi folks,
I a newbie freeradius user and I have a new problem. I have a switch
that send auth request to a FreeRadius. I need that if the auth
request if for a windows user (for example user NTCETEMMSA\guillem)
resend the request to a windows nps server, but, if the auth request
is a MAC address
Chapellon a.chapel...@horoa.net
the freeradius sitribution ships all the needed file to create a deb
package from the lastest sources.
This should make your debian system even happier.
regards
Le 14/11/2011 10:55, IT Support a écrit :
Thanks
I will try it, but debian doesn't have the binary
Good afternoon
I'm a newbie with freeradius and I'm trying to configure a radius
proxy server that makes to a server microsoft radius nps.
I have a Enterasys C3 switch that sends auth requests to my
Freeradius. If the request is for auth a MAC the FR auth locally, but
if the request is for auth
Dear All,
I grabbed today the sources for 1.7 distribution and wanted to compile the
rlm_python also in, but, as opposite to 1.6 version, it looks like some
libraries are not longer included, here are the errors:
host1:/usr/local/src/freeradius/freeradius-1.1.7/src/modules/rlm_python# make
Support a écrit :
Dear All,
I grabbed today the sources for 1.7 distribution and wanted to compile
the rlm_python also in, but, as opposite to 1.6 version, it looks like some
libraries are not longer included, here are the errors:
host1:/usr/local/src/freeradius/freeradius-1.1.7/src/modules
Hi there Alan,
and thank you for your reply.
I got the install now successfully without further issues.
Regarding the version, I hope you understood me, since I am not really an
accountant ;-). Will be more careful with numbers in the future.
Got another question now that I have your
Hi All,
I have noticed that in latest versions of rlm_digest the part with converting
of the attributes to something useful (DEBUG(rlm_digest: Converting
Digest-Attributes to something sane...)) was moved from authorize section to
authenticate section. There was even a discussion a while
Hello,
as I have mentioned before in one of my e-mails, is there anyone who can
provide me a practical example of the python module?
Thank you in advance,
DanB
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hey Allan,
thxs for the answer. It looks bit less foggy for me now.
Have a good one,
DanB
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Peter,
thank you for your fast response.
Can u also provide me some example of script, so I could understand how the
module works? Again, it is bit difficult for me to find it out from the
documentation which comes with freeradius.
Ta,
Dan
On Mon 28 May 2007, UriCALL Support wrote:
Hi
Hi All,
I am in need of developing my own application using rlm_python. Can anybody
inform me about some documentation available? From what I have found on
Internet it looks like an isolate project with lack of users ... Anybody able
to share the experience with me? Is it stable for
Hi,
I need to allow my user to access the system on specific date (i.e
1/4/2008).
Can I do it with freeradius ?
Many Thanks,
Shachar
[EMAIL PROTECTED]
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Alan,
it is a big help. This what happens when users are not reading the
documentation fully :(.
Thxs a loot, I will try it out.
Cheers,
Dan
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
We are looking at installing the Dial Up Admin Interface for administration
purposes.
Research suggests that the place to in all the relevant information is at
/usr/share/doc/freeradius-dialupadmin/HOWTO.gz
We have installed V1.1.4 and the HOWTO.gz cannot be found here. Could
Is there an easy step by step guide for beginners on installing Free Radius
1.1.4. on Centos 4.4?
Have setup new Centos Server and now wanting to install Free Radius.
Regards,
David Willis
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
You can create a group deactivated for the users you don't want to
allow to connect and set Auth-Type == Reject for that group.
If you want to tie a group to a certain NAS you have to use huntgroups:
TestNAS1NAS-IP-Address == xxx.xxx.xxx.xxx
SQL-Group == dialup,
There is a nas table you can use. It's the last table db_mysql.sql
creates;
Then you have to enable it in sql.conf
# Set to 'yes' to read radius clients from the database ('nas'
table)
#readclients = yes
I haven't tried it but it should work.
Bogdan.
-Original
Title: Message
Hello Miguel,
To be honest I'm not sure! The last reply from Alan
says that this functionality is in the CVs head and not in 1.1.x. I'm not sure
exactly what that means. But I guess you are right, at the moment it is
impossible to use MD5 or SHA1. I guess the best practice
That would be nice to do. Especially for deactivated users.
Unfortunately I don't think it's possible. One of my colleagues looked
into that but he couldn't do it at this level.
Some companies to this with MS ISA.
As far as I know you need some sort of a proxy server to do this.
Bogdan.
I've just tried it but it doesn't work. :-( Is WISPr-Redirection-URL
specific to a certain type of NAS? I've tried it with an adsl username:
Radcheck:
+-+---+++---+
| id | UserName | Attribute | op | Value |
attributes (rlm_sql: unknown attribute SSHA-Password). For the time
beeingI'llstick with Unix Crypt.
Please let me know if you find a better
config.
Bogdan.
-Original Message-From: Bogdan Dumitriu - Technical
Support Team [mailto:[EMAIL PROTECTED] Sent: May 4, 2006
3:40 PMTo
users mailing list
Subject: Re: FreeRadius + MySQL Encrypted passwords
Bogdan Dumitriu - Technical Support Team [EMAIL PROTECTED]
wrote:
However my
freeRadius doesn't recognize any of these 2 attributes (rlm_sql:
unknown attribute SSHA-Password).
This functionality is in the CVS head
Hello all,
Is this normal?
It looks like it's comparing group ownership against each group even
though the user is a member of only one group. Why does it has to check
group ownership if there is an entry in the usergroup file for this
user?
It looks like it's running 'SELECT GroupName FROM
Title: Message
Hi
all,
I've been trying to
encrypt the passwords in mySQL using SHA1 or MD5 without any luck for the last
several days.
First let me tell
you a bit about our system:
RedHat ES
4
freeradius-1.0.1-2.RHEL4
freeradius-mysql-1.0.1-2.RHEL4
Thanks Alan,
Changed:
| 844 | bogdan | Crypt-Password | == | 55MCU5TXMoKsA |
To
| 844 | bogdan | SSHA-Password | == | 55MCU5TXMoKsA |
And
pap {
encryption_scheme = sha1
}
And it says:
rlm_sql: unknown attribute SSHA-Password
However the output
On the FreeRADIUS website, it says that it supports load balancing, but
I cannot find any documentation at all on how to set it up. I found some
stuff on module failovers, but nothing on load balancing. Does anyone
have any more information on this?
I'm not really that interested in load
Hi All,
I know this is a very bad idea.tm but I'm trying to get FREERadius
working on Redhat 8.0 on a customers internal linux server.The
current build won't compile which doesn't really surprise me. I was
wondering if there are any old hands at freeradius that remembers which
build would
October 2004 10:01 AM
To: [EMAIL PROTECTED]
Subject: Re: Redhat 8.0 make errors
Matthew Western, IT Support, Lonsdale wrote:
Hi All,
I know this is a very bad idea.tm but I'm trying to get FREERadius
working on Redhat 8.0 on a customers internal linux server.The
current build won't compile
Hello!
I am looking to configure freeradius to support PEAP..so that my
wireless users can use 802.1x in Win XP to obtain a secure connection.
I am little confused (I have to admit I am a Radius novice) regarding
this..Basically, I want the users to use the username/password (stored
in the radius
Hi All,
My long term plan is to get a Cisco 1721 to authenticate against
freeRadius - just the unix passwords '/etc/passwd' for VPN.
I've spend the day reading various how-tos and am making progress and
learning new terms but I can't get a basic test working even from the
command line unless
OK, I think I've got it sussed.Radiusd was running as radiusd user
and didn't have access to /etc/shadow and /etc/passwd - at least I
figured it out...
Take care all.
Ta
matthew
-Original Message-
From: Matthew Western, IT Support, Lonsdale
Sent: Thursday, 5 August 2004 5:02 PM
-
--
MANNET Technical Support
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Is there any way to store userlists in *some* form of database, that
would let FreeRadius authenticate users depending on a flag in the
database depending on which NAS the request is coming from?
IE, i have 6 radius servers i'd like to condense down to *one*, but
all 6 userlists are
You need to set up your server so that people who buy acceleration send
their own realm information with a username. For instance... You have
username bob and he is trying to log in to your acceleration server
through his Internet service provider Joe ISP who has domain name
joeisp.com. He needs
What he is saying is that you do not need to dig through the code to
figure out this problem. Each dictionary file contains all the vendor
specific attributes that you need. There is not a particular
vendor-specific-attribute field to deal with. There are just entries in
a dictionary file for that
Dear Freeradius users:
I'm using freeradius 0.9.3 and I've written 2 basic perl scripts to use
them depending on the huntgroup and the Auth-Type (quintum.pl and gnugk.pl).
Both modules are specified in the radiusd.conf and are loaded when
freeradius starts.
I've noticed that the last loaded
Hi,
I've been doing some hacking with the perl module. The Auth-Type can be set
by the authorization module or in the users file ( The latter works for me)
-My users file only has the line:
DEFAULT Auth-Type := perl_1
-My radiusd.conf 's relevant sections
modules {
...
...
perl voip {
Can anyone tell me all the files that need edited so my customers can not double log
in. I have gone through and setup what I thougt would work but I am still seeing
double log ins
Thank You in Advance
Byron
The other files have specific requirements, and therefore don't know
what to do with some packets, when those packets don't contain the
information then need.
Like what information?
The information which shows up when you do radwho, or radlast.
All the information that shows
Alan DeKok wrote:
WA Support [EMAIL PROTECTED] wrote:
All the information that shows in radwho is logged in the detail file
with a STOP record, so rlm_radutmp has access to the correct
information, right?
Uh, no. The stop record may not contain the information needed by
radutmp
Hello,
We are using freeradius 0.7.1 on a redhat linux box.
Does anyone have any ideas why some of our users are not getting pruned
out of radutmp and radwtmp even though I can see STOP records in the
detail file for the user session?
I have Simultaneous-Use := 1 set as a DEFAULT in users, and
52 matches
Mail list logo