Capping the refresh rates didn't do anything. So I tried to narrow the
ranges. Here is what I have now:
HorizSync 50-80
VertRefresh 55-120
It flickers even worse now at this setting. If I try to go 51-80, the
display is garbage.
On Sat, 2003-12-06 at 20:52, Ryan Detert wrote:
>
I will try this again when I get home. The manual is not at all useful.
What I pasted is all the specs that it gives. The manual is a a 2 page
leaflet. If I can't get this to work then let me know which converter
you
have and I'll sell the one I have to my friend since he uses windows.
thanx
-r
I just compiled the whole thing from source.
./configure
make
make install
cake.
Tom Hightower wrote:
(see subject line)
---
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive? Does it
I will try this again when I get home. The manual is not at all useful.
What I pasted is all the specs that it gives. The manual is a a 2 page
leaflet. If I can't get this to work then let me know which converter you
have and I'll sell the one I have to my friend since he uses windows.
thanx
-
I'd try capping the refresh in your monitor section.
- I never worry about modelines. Modern X is pretty good with it.
- I just set the horizontal sync/vert refresh to the settings in the
manual. Try looking them up.
When I get home (I'm snowed in at my girlfriend's) I can send you
XF86Config from
Sorry I forgot to include this. The manual says:
640x480 @ 85Hz
800x600 @ 80Hz
1024x768 @ 60Hz
I want to run it at 800x600.
-ryan
> What resolutions refresh rates can the unit do? Should be in the manual.
>
> Ryan Detert wrote:
> > I just bought a Startech vga to tv converter. It is designed
I use an ATI AIW MACH64 card which has a TV tuner. Unfortunatly, the gatos
capture driver (km) for this card is not 100% V4L1 compatible. As such, I
cannot
use mplayer to display TV from this card.
I can use xawtv for this card, which works great.
Is there anyway xawtv can be used at the tv dis
What resolutions refresh rates can the unit do? Should be in the manual.
Ryan Detert wrote:
I just bought a Startech vga to tv converter. It is designed to work with
windows of course, and it works perfectly on windows. However, on XFree86
4.3, slackware 9.1, using the nvidia drivers for TNT2, I
can you send me your stationlist.xml?
I wrote the new tvtime plugin stuff and have never seen this before. It
would be nice to know what the parser is objecting to.
--
Mike Ruelle
[EMAIL PROTECTED]
http://world.std.com/~mruelle/
On Sat, 2003-12-06 at 17:44, Darrell wrote:
> Hi
>
> See this wit
Hi
See this with v1.4 as well as cvs (Dec 6 14:00PST).
First launch of Freevo:
ROM_DRIVES: Auto-detected and added "('/mnt/cdrom', '/dev/dvd', 'CD-1')"
ROM_DRIVES: Auto-detected and added "('/mnt/burner', '/dev/sr0',
'CD-2')"
Virtual filesystem activated
WARNING: PyLirc not found, lirc remote co
Tuesday, December 2, 2003, 1:36:57 PM, Dirk wrote:
> Robert Winder wrote:
>> Monday, December 1, 2003, 3:18:47 PM, Dirk wrote:
>>
>>> xine should be started with --no-lirc and --stdctrl. With that, Freevo
>>> uses lirc and sends commands to xine.
>>
>> Ok at fist i enabled this with the XINE_CO
I have the exact setup you describe. IIRC the G400-TV marvel box was not
very well supported under Linux. Just like when you decided to get the
Matrox because of it's superb support under Linux I decided to shell out
the extra $20.00 and get a bt878 off eBay because it's the best supported
chipset
I'm helping a friend choose components for his Freevo box. We have
obtained a G400-TV, I've verified that it works great just like my
G400-DH for framebuffer/mga_vid (after I gave mga_vid.o mga_ram_size=16).
Should I recommend he get a BT878 in addition? The G400-TV has capture
capability (http:/
Darrell wrote:
Just installed cvs and I can't get the recordserver up, following is the
error message.
Anyone with ideas ?
There was a problem with helpers using skin / osd functions but Dischi
just fixed it. A fix should be available for you in the next CVS snapshot.
-Rob
--
(see subject line)
---
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive? Does it
help you create better code? SHARE THE LOVE, and help us help
YOU! Click Here: http://sourceforge.ne
Saturday, December 6, 2003, 6:00:59 AM, Murray wrote:
> On boot my lounge room [pc boots up Freevo, but screen blanking comes on
> after 20 mins or so... i start freevo as follows:
> /usr/X11R6/bin/xinit /root/freevo.start -- /usr/X11R6/bin/X -xf86config
> /etc/X11/XF86Config bc -screen NVTVOUT
16 matches
Mail list logo