OTECTED]
> Sent: Wednesday, April 07, 2004 2:07 PM
> To: [EMAIL PROTECTED]
> Subject: Re: [Freevo-users] Bought a TiVo - looking for
> someone to take over Freevo HOWTO
>
>
> Could it be moved to the Wiki?
>
> Joe Stump wrote:
>
> >Hey guys,
> >
> >
if anyone out there would
like to take over.
Also, I have a streamzap remote that I'll trade for a $20 ITMS gift cert
(battery clip is broken, but taped on).
--Joe
--
Joe Stump, President
JCS Solutions
http://www.jcssolutions.com
I noticed my favorites didn't get set to record - maybe this is why.
I've been thinking more and more about saying "fsck it" and getting a
TiVo ... I can't spend 2 weeks fixing everything that breaks everytime I
upgrade - along with the xmltv breaking every couple of weeks ...
--Joe
> -Origi
The problem I found was that -i (the line in or something) was set to 0.
I had to set both -l and -i for everything to work, but now I can't
watch and record.
Why could I watch *and* record with the *exact* same setup in 1.4 but
not in 1.5?
--Joe
> -Original Message-
> From: Bart Hereman
tv://;
aumix -l 90;
I'm still at a loss as to why recording worked perfectly in 1.4 and is
now completely broken in 1.5 (the above command line worked fine in
1.4).
--Joe
--
--
Joe Stump, President
JCS Solutions
p. (734) 786 0176
f. (520) 844 9344
ht
Could you send me your VCR_CMD? That would be great!
--Joe
On Fri, 2004-03-26 at 18:27, Jon Reynolds wrote:
> On Fri, 2004-03-26 at 05:25, Joe Stump wrote:
> > Well 1.5 managed to completely kill a fully working version of Freevo on
> > my box. I upgraded with apt-get a couple
ken in 1.5 - especially since I haven't touched anything
except Freevo ... except those pesky aumix commands ...
--Joe
--
--
Joe Stump, President
JCS Solutions
p. (734) 786 0176
f. (520) 844 9344
http://www.jcssolutions.com
---
This
/site-packages/_xmlplus/dom/Element.py", line
96, in setAttribute
raise SyntaxErr()
SyntaxErr: Specified string is invalid or illegal
Any ideas?
--Joe
--
--
Joe Stump, President
JCS Solutions
p. (734) 786 0176
f. (520) 844 9344
http://www.jcssolutions.com
--
picture (so about 5 inches of
black appears on the right of my screen). Then when I exit freevo has
done the same (all scrunched up in the middle).
What gives?
--Joe
--
--
Joe Stump, President
JCS Solutions
p. (734) 786 0176
f. (520) 844 9344
http://www.jcssolutions.com
Hey,
Why are the FXD files writing .mpeg when the VCR_CMD are writing .avi
files?
--Joe
--
--
Joe Stump, President
JCS Solutions
p. (734) 786 0176
f. (520) 844 9344
http://www.jcssolutions.com
---
This SF.Net email is sponsored by: IBM
low the
steps in local_config.py TV crashes, but doesn't if I load tv.tvtime in
the main config.
Also, is there a complete list of config variables that have been
changed or deleted with their new names?
Thanks!
--Joe
--
Joe Stump, President
JCS Solutions
ht
ze)
File "/usr/lib/python2.3/site-packages/freevo/osd.py", line 732, in
getfont
return self.font_info_cache[key]
KeyError: ('/usr/share/freevo/fonts/Vera.ttf', 18)
Couldnt load font "/usr/share/freevo/fonts/Vera.ttf"
Traceback (most rec
codec=mpeg4' +
':vbitrate=2000:' +
'keyint=30 ' +
'-oac mp3lame -lameopts ' +
'br=128:cbr:mode=3 ' +
'-ffourcc divx ' +
'-endpos %(seconds)s ' +
'-o %(filename)s.avi t
Correct the G450 does not show up on the TV until about midpoint in the
linux bootup process.
--Joe
> -Original Message-
> From: Ole Andre Schistad [mailto:[EMAIL PROTECTED]
> Sent: Tuesday, March 16, 2004 2:11 PM
> To: [EMAIL PROTECTED]
> Subject: [Freevo-users] Question to the Matrox
only happens about 10 minutes into a show, which is
really odd.
Anyone have any of the same problems? Any way to resolve the issues?
--Joe
--
--
Joe Stump, President
JCS Solutions
p. (734) 786 0176
f. (520) 844 9344
http://www.jcssolutions.com
Not that I can think of directly. In fact it's the opposite: there are
things you can do in the web interface that you can't do in the frontend
(i.e. schedule favorites).
Everything should work fine for simple recording.
--Joe
> -Original Message-
> From: Ross M Karchner [mailto:[EMAIL
On my 80GB hard drive I have about anywhere between 70 and 100 episodes
of Seinfeld archived (because watching Soup Nazi on demand is why I
built my Freevo box).
I use up anywhere between 3 and 6 gb for regular everyday recordings
that are deleted daily. I have about 15GB free as of right now and
Well I dist-upgraded my Debian and screwed myself ... Everything seems to
be in order (XML listings show up fine, etc.) - but tvtime won't play in
the console or via freevo.
--Joe
--
Joe Stump <[EMAIL PROTECTED]>
http://www.joestump.net
"Label makers are proof God wants Sys Ad
server error, but let's go for it anyway
zap2it failed to give us a form to choose a Text Listings
got channel list
failed 1 times, will retry after 30 seconds..
ugh.
--Joe
> Try upgrading to latest xmltv 0.5.25
>
> /PS
>
> -Ursprungligt meddelande-----
> Från: J
> Try upgrading to latest xmltv 0.5.25
Just finished doing this - same results (slow and unresponsive). My net
connection seems to be fine and going to zap2it.com in a browser is
snappy.
--Joe
>
> /PS
>
> -Ursprungligt meddelande-----
> Från: Joe Stump [mailto:[EMAIL PR
Anyone else out there not getting their TV channel listings? Mine appears
to be hanging ... running xmltv 0.5.23
--Joe
--
Joe Stump <[EMAIL PROTECTED]>
http://www.joestump.net
"Label makers are proof God wants Sys Admins
> YOU! Click Here: http://sourceforge.net/donate/
> ___
> Freevo-users mailing list
> [EMAIL PROTECTED]
> https://lists.sourceforge.net/lists/listinfo/freevo-users
>
>
--
Joe Stump <[EMAIL PROTECTED]>
http://www.joestump.net
"Label makers are proof God wants Sys Ad
onsored by: SF.net Giveback Program.
> Does SourceForge.net help you be more productive? Does it
> help you create better code? SHARE THE LOVE, and help us help
> YOU! Click Here: http://sourceforge.net/donate/
> ___
> Freevo-users mail
RE THE LOVE, and help us help
> YOU! Click Here: http://sourceforge.net/donate/
> ___
> Freevo-users mailing list
> [EMAIL PROTECTED]
> https://lists.sourceforge.net/lists/listinfo/freevo-users
>
>
--
Joe Stump <[EMAIL PROTECTED]>
My favorites have mysteriously disappeard from the recording schedule.
Does Freevo not show them because they are favorites?
--Joe
--
Joe Stump <[EMAIL PROTECTED]>
http://www.joestump.net
"Label makers are proof God wants Sys Admins
Is this possible right now? Anyone have a hack laying around that works? I
figure I could just drop down to a shell (since MPlayer does this from
what I understand), but it would be nice to hit the record button while a
DVD is selected :)
--Joe
--
Joe Stump <[EMAIL PROTECTED]>
m.
> Does SourceForge.net help you be more productive? Does it
> help you create better code? SHARE THE LOVE, and help us help
> YOU! Click Here: http://sourceforge.net/donate/
> _______
> Freevo-users mailing list
> [EMAIL PROTECTED]
&
ings 35000 36 6 49 3 42 0
#accel true
#bcast false
#double false
#laced false
endmode
This works great on my Sony Trinitron (32 inch).
--Joe
--
Joe Stump <[EMAIL PROTECTED]>
http://www.joestump.net
"Label ma
il is sponsored by: SF.net Giveback Program.
> Does SourceForge.net help you be more productive? Does it
> help you create better code? SHARE THE LOVE, and help us help
> YOU! Click Here: http://sourceforge.net/donate/
> ___
> Freevo-users mai
Anyone out there having problems with *really* *bright* *red* colors.
Anything that is remotely red is bright as hell and washed out sort of.
The rest of the colors are perfectly normal.
Anyone have similary issues?
--Joe
--
Joe Stump <[EMAIL PROTECTED]>
http://www.joestump.net
"L
Am I correct in saying this is not a working feature in the record server
or webserver? I have Seinfeld set the the highest priority, but it's not
being recorded *at all* because of other conflicts with favorites that
were added after Seinfeld became a favorite.
--Joe
--
Joe Stump &l
OVE, and help us help
> YOU! Click Here: http://sourceforge.net/donate/
> ___
> Freevo-users mailing list
> [EMAIL PROTECTED]
> https://lists.sourceforge.net/lists/listinfo/freevo-users
>
>
--
Joe Stump <[EMAIL PROTECTED]>
http
You can do manual recording from the web interface AFAIK. There are other
simple side projects that do manual recording that you could couple with
Freevo (ie. WebVCR+).
--Joe
> In message <[EMAIL PROTECTED]>, Joe
> Stump <[EMAIL PROTECTED]> writes
>>I think the answe
net help you be more productive? Does it
> help you create better code? SHARE THE LOVE, and help us help
> YOU! Click Here: http://sourceforge.net/donate/
> ___
> Freevo-users mailing list
> [EMAIL PROTECTED]
> https://lists.sourceforge.ne
rs
>>
>>
>>
>
>
>
> ---
> This SF.net email is sponsored by: SF.net Giveback Program.
> Does SourceForge.net help you be more productive? Does it
> help you create better code? SHARE THE LOVE, and help us
1.) Anyone out there using any decent USB gamepads?
2.) Anyone get two working for 2 player action?
3.) Do they work with xmame in SDL/fb mode?
Thanks!
--Joe
--
Joe Stump <[EMAIL PROTECTED]>
http://www.joestump.net
"Label makers are proof God wants Sys Admins
THE LOVE, and help us help
> YOU! Click Here: http://sourceforge.net/donate/
> ___
> Freevo-users mailing list
> [EMAIL PROTECTED]
> https://lists.sourceforge.net/lists/listinfo/freevo-users
>
>
--
Joe Stump <[EMAIL PROTECTED]>
http://www.
t; Thanks Again!
>
>> Note: Someone suggested I try '.bin' instead of 'bin'. That did not
>> seem
>> to work.
>
>
>
>
>
>
>
>
>
>
>
> ---
> This S
I'm using the Debian packages and when it boots into Freevo mplayer
doesn't play DVD's or Movies and the log file says that an unknown error
had occurred. Stopping freevo and restarting it fixes the mplayer issue.
--Joe
--
Joe Stump <[EMAIL PROTECTED]>
http://www.joestump.
currently occupied?
These two are pretty important IMO because my Freevo box may not be in
exact sync with the cable company. And if these are configurable where are
they configurable?
--Joe
--
Joe Stump <[EMAIL PROTECTED]>
http://www.joestump.net
"Label makers are proof God wants
My freevo box goes to sleep (which I'm hoping to stop). The shitty thing
is that not only does it blank the term, but it totally goes to sleep and
doesn't a.) record and then b.) when it wakes up the clock is set to when
it went to sleep and doesn't update until I do a ntpdate -s.
t; You're doing a ./configure first yeah?
>
> What messages is it giving when it fails?
>
> -Chris
>
> On Fri, 21 Nov 2003 12:48:01 -0500 (EST), "Joe Stump" <[EMAIL PROTECTED]>
> said:
>> I thought this too which is why I used a snapshot dated August (and on
nk the trick was to patch
> against an older version of lirc, but I don't remember exactly which. I'll
> try to go back though what I did this weekend and send what I can to you.
>
> -Davin
>
> - Original Message -
> From: "Joe Stump" <[EMAIL
I finally just installed the deb package :) (it worked)
--Joe
> "Joe Stump" <[EMAIL PROTECTED]> writes:
>
>> Any ideas?
>
> Try making a commandline for viewing tv with mplayer.
> When that works, try making an mencoder-line.
>
> --
> Eirik Me
ly processed, 0 frames dropped.
Sorry, this file format is not recognized/supported
=
=== If this file is an AVI, ASF or MPEG stream, please contact the author!
===
Cannot open demuxer.
Exiting...
Any ideas?
--Joe
> "Joe Stump" <[EMAIL PROTECTED]> writes:
>
>>
ec=mpeg4:vbitrate=1200:keyint=30 -oac mp3lame
-lameopts br=128:cbr:mode=3 -ffourcc divx -endpos 3049 -o
/mnt/media/Movies/TV/11-21_07:00_Good_Morning_America_-_.avi
--
Joe Stump <[EMAIL PROTECTED]>
http://www.joestump.net
"Label makers are proof God wants Sys Admins to be happy."
You should add the package "eject" to the list if prereq's. If it's not
there hitting "." does not eject the cdrom.
--Joe
--
Joe Stump <[EMAIL PROTECTED]>
http://www.joestump.net
"Label makers a
I have a 1.3GHz + 512mb of RAM - what would be enough of a CPU to not have
to drop frames? Also, does -framedrop degrade the movie experience (I'm
not a huge a/v'phile, but I don't want my movies to look crappy).
--Joe
> "Joe Stump" <[EMAIL PROTECTED]> writes:
Anyone out there actually get this working with lirc? I've attempted
patching against current cvs and two different snapshots (0.7 pre1 and
pre2) and I can't get *any* of them working. Anyone got a patched/working
source tree that they could tar up and send over? :)
--Joe
--
Joe Stu
his SF.net email is sponsored by: SF.net Giveback Program.
> Does SourceForge.net help you be more productive? Does it
> help you create better code? SHARE THE LOVE, and help us help
> YOU! Click Here: http://sourceforge.net/donate/
> ___________
>
0 was great with the old fbset scripts (ie
mag_ntsc_800x600.sh, etc), but the new one doesn't format the screen
correctly. It's fine on the left side, a little too high on the top and
about 3 inches of black on the right. Any ideas out there?
--Joe
--
Joe Stump <[EMAI
/lircd
lircd 0.7.0pre2[18041]: could not open /dev/lirc
lircd 0.7.0pre2[18041]: default_init(): No such device
lircd 0.7.0pre2[18041]: caught signal
Terminated
I followed the directions found here:
http://sourceforge.net/project/shownotes.php?release_id=177518
Any ideas?
Thanks!
--Joe
--
Joe
I thought about idlebar too but which one will be
shown if you have several partitions?
A total I would think.
/dev/hda1 30gb / 100gb
/dev/hda2 20gb / 50gb
== 50gb / 150gb == 33% used
--Joe
/Björn
--- "Gray, Tim" <[EMAIL PROTECTED]> skrev: >
I have a simple idea for an idlebar plugin.
parse t
rameters of TVGuide.rebuild() to me?
Thanks!
--Joe
ps. I know it's a small and somewhat insignificant patch, but I have to
believe this annoys people besides me.
--
Joe Stump <[EMAIL PROTECTED]>
http://www.joestump.net
"Labe
I am going to write some docs soon on the newer recording
> interface, maybe you should add that as well. I'll keep you posted.
Sounds like a plan.
--Joe
--
Joe Stump <[EMAIL PROTECTED]>
http://www.joestump.net
"Label m
Sorry of the slow updates on this one. I've been busy at work and was
finally able to start working on my Freevo box again (yay!). The good
news is that this means my Freevo Installation HOWTO has been updated.
ChangeLog:
- Added section on tvtime plugin (including info on VBI and
stationlist.x
www.philosomatika.com - by far the best techno on the web.
--Joe
On Sunday, August 17, 2003, at 12:29 PM, Dirk Meyer wrote:
Hi,
I added a web radio plugin to freevo. The problem is: what should be
in it? I used the gxine mediamarks, but most of the urls are not
working and I want more informati
;
> - Original Message -----
> From: "Joe Stump" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Saturday, August 16, 2003 12:28 AM
> Subject: [Freevo-users] import error with Image in CVS
>
>
>> myth:/usr/local/freevo# ./freevo
>> ROM_DRIVES
if
ImportError: No module named mmpython.image
--Joe
> You miss some Python modules (Pyagme at least I think)
>
> ++
>
> David
>
> - Original Message -
> From: "Joe Stump" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Saturday, Augu
if
ImportError: No module named mmpython.image
--Joe
> You miss some Python modules (Pyagme at least I think)
>
> ++
>
> David
>
> - Original Message -
> From: "Joe Stump" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Saturday, Augu
line 79, in ?
import Image # PIL
ImportError: No module named Image
Any ideas?
--
Joe Stump <[EMAIL PROTECTED]>
http://www.joestump.net
"Label makers are proof God wants Sys Admins to be happy."
---
This SF.Net email s
I've recently been playing with video quality. I'd say the lowest you
want to go is around 1200 for a bit rate. I've recorded at 4000, which
is super quality, but requires quite a bit of room for an hour of video
(about 2GB if I recall correctly).
1500 I believe is where I record now, which
t. When my FIC motherboard
> went south, I replaced it with a Biostar board that included onboard
> audio w/ digital output.
>
> Way back in the day, VIA audio was only capable of 48khz. The
> documentation for the OSS driver indicates that newer chipsets will do
> a
> http://aspnet.click-url.com/go/psa0013ave/direct;at.aspnet_072303_01/01
> ___
> Freevo-users mailing list
> [EMAIL PROTECTED]
> https://lists.sourceforge.net/lists/listinfo/freevo-users
>
>
--
Joe Stump &
current command:
>
> /usr/local/bin/mencoder -tv
> on:driver=v4l:input=0:norm=NTSC:channel=2:chanlist=us-cable:width=320:height=240:outfmt=yv12:device=/dev/video0:adevice=/dev/dsp:audiorate=44100:buffersize=128
> -ovc lavc -lavcopts vcodec=mpeg4:vbitrate=1800:keyint=30 -oac mp3lam
stance) without having to schedule them each
morning when I wake up, which is how it currently works with Freevo AFAIK.
--Joe
--
Joe Stump <[EMAIL PROTECTED]>
http://www.joestump.net
"Label makers are proof God wants Sys Admins to be happy."
--
=1800:keyint=30 -oac mp3lame
-lameopts br=128:cbr:mode=3 -ffourcc divx -o
/mnt/movies/Movies/Recorded/08-03_12:30_-_M_A_S_H_Commander_Pierce.avi
Note: the above is the command I have been testing with.
--Joe
--
Joe Stump <[EMAIL PROTECTED]>
http://www.joestump.net
"Label makers are proof G
sponsored by: Free pre-built ASP.NET sites including
> Data Reports, E-commerce, Portals, and Forums are available now.
> Download today and enter to win an XBOX or Visual Studio .NET.
> http://aspnet.click-url.com/go/psa0013ave/direct;at.aspnet_072303_01/01
> __
CORD_SCHEDULE is set to
/var/cache/freevo/record_schedule.xml, but all of my freevo stuff is in
/tmp/freevo and the record schedule *appears* to be
/tmp/freevo_record.lst, but I'm not sure.
Any ideas?
Thanks!
--Joe
--
Joe Stump <[EMAIL PROTECTED]>
http://www.joestump.net
"
Freevo's stable 1.3.2 didn't retry for pickle. I actually had to change
the import cPickle as pickle to just import pickle. After that and
clearing my cache it worked fine.
--Joe
> "Joe Stump" wrote:
>> I'm in a pickle (huge pun)! When I go to TV listings i
I'm in a pickle (huge pun)! When I go to TV listings in freevo it spits
out a strange error about cPickle and that I should try pickle. Any ideas?
Exact error: "strange cPickle error...try pickle"
--Joe
--
Joe Stump <[EMAIL PROTECTED]>
http://www.joestump.net
"Label
You could try here:
http://zebulon.miester.org/~jstump/doc/freevo/html/
--Joe
On Tuesday, July 22, 2003, at 02:07 PM, Mark Casey wrote:
I'm totally stuck, I don't know where to begin with freevo now that it
is
installed.
All I get when I try running is a great many errors. (see attached
file)
Title: RE: [Freevo-users] Re: Freevo HOWTO
http://zebulon.miester.org/~jstump/doc/
Ignore my qmail one
- it's incomplete at this time.
--Joe
--Joe Stump <[EMAIL PROTECTED]>http://www.joestump.net"Label makers are proof God wants
Sys Admins to be happy."
73 matches
Mail list logo