At 2:06 am -0500 13/11/02, Dustin wrote:
Check if the router is getting an IP from the outside.
If it isn't, unplug your cable modem for 2 minutes and plug it back in.
This is good advice! I had the same problem, had me stumped for
hours. The I read the FM and did this. Bing! All working.
But
You may need to set up the Hostname in the router to be a specific name.
I set one of these up for a friend with Comcast (used to be HOME), and we
had a little trouble with it until we set that up.I think the Linksys
tech support people where the ones that finally helpped with that. Call
I setup a Linksys router for my neighbor with a cable modem, and the problem
was the caching of the MAC address in the cable modem. You need to power up
the router before your cable modem -- if the modem can't contact the
computer or in this case the router on powerup, it uses the MAC address
thanks all for the suggestions, i'm away from home for a couple days, hope
to sort it out with your advice on my return
--
george ruta - northcountry kayak
**sea kayaks for upstate new york and new england**
518-677-3040, http://www.capital.net/com/nckayak
--
G-Books is sponsored by
i decided to go wireless after reading the previous posts. my pismo works
fine directly connected to earthlink cable modem. it talks to and configures
the linksys router (befw11s4 ver 2), but i can't get to the internet via the
router, even though the wan led is lit on the router. i tried both the
Is your pismo getting an ip address and gateway ip from the router?
You may need to enter a static and gateway ip on your pismo manually.
The IP on your computer will be different now, probably 192.168.0.100
or something like that, and the router should have the ip that was
formally used by
on 12/11/02 23:04, Todd Ruch at [EMAIL PROTECTED] wrote:
Is your pismo getting an ip address and gateway ip from the router?
You may need to enter a static and gateway ip on your pismo manually.
The IP on your computer will be different now, probably 192.168.0.100
or something like that, and
;mail.maclaunch.com] On Behalf Of george
ruta
Sent: Tuesday, November 12, 2002 10:42 PM
To: G-Books
Subject: help! with router
i decided to go wireless after reading the previous posts. my pismo
works
fine directly connected to earthlink cable modem. it talks to and
configures
the linksys router
On Tuesday, Nov 12, 2002, at 21:20 US/Pacific, Laurent Daudelin wrote:
I'm no network expert but from the message the original poster is
mentioning, it looks like Earthlink is able to tell that their servers
are
talking to a router, hence the saying they don't support home
networks.
There
