/*xx
I'm going to go out on a limb and state that I refuse to support
non-flat layers :-)
[1]http://www.allflexinc.com/origamiflex.shtml
Supported or not these things are worth taking a look at just for
the
strangeness if noting else:
I am not shure if it is possible to have non-circular drill holes
in
gerber files. We can have the pad around the hole be of any
shape,
but the hole itself probably needs to be circular.
We can have any shape hole we want, if we export it as a gerber file
From: rickman [1]gnuarm.g...@arius.com
Date: Tue, 08 Feb 2011 02:44:09 -0500
Subject: Re: gEDA-user: transition of pcb internal units to metric
(SI, mm)
The cost to [1]tape-out a chip at 90 nm is at least US$1,000,000 and
exceeds US$3,000,000 for 65 nm.^[2][40]
Do you
From: David Smith [1]dave.sm...@st.com
Date: Tue, 8 Feb 2011 14:32:24 +
I am not an expert on ASIC manufacture, but I think that you've made
some incorrect assumptions there.
Yes, the standard wafer at current cutting-edge processes is 300 mm
(although for older and
-- Forwarded message --
From: DJ Delorie [1...@delorie.com
To: gEDA user mailing list [2]geda-u...@moria.seul.org
Date: Tue, 11 Jan 2011 16:20:27 -0500
Subject: Re: gEDA-user: PCB's postscript exporter
Fixed in GIT head. Added the appropriate DSC
-- Forwarded message --
From: Steven Michalske [1]smichal...@gmail.com
To: gEDA user mailing list [2]geda-u...@moria.seul.org
Date: Tue, 11 Jan 2011 18:53:02 -0800
Subject: Re: gEDA-user: Bugs, warts and feature requests (5)
On Tue, Jan 11, 2011 at
Hello,
When I use export - ps (postscript) inside PCB and set the media to
'Letter' the resulting images in the postscript file are perfectly
centered and everything looks correct. The paper size of the ps file
is also Letter.
If I now export the postscript as 11x17 or C-Size
On Tue, Jan 11, 2011 at 10:21 AM, Andrew Miner [1]zmi...@gmail.com
wrote:
Hello,
When I use export - ps (postscript) inside PCB and set the media
to 'Letter' the resulting images in the postscript file are
perfectly centered and everything looks correct. The paper size
Kai-Martin Knaak wrote:
So it should be:
/-
(...), new users should check the package management of their
distribution. Major Linux distributions known to offer geda and pcb are
Debian, Ubuntu, Fedora and OpenSuSE ((add more distros here)). Users of
other distributions may still be
on roll length is how thick the rolls of material
are when wound up, since the winding/unwinding machines have a diameter and
weight limit.
Andrew Miner
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo
power input pins to the power plane (and only connected it to a
capacitor instead).
+1
+1
Very useful.
Andrew Miner
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
-Original Message-
Karl Hammar wrote
Ok, a first step would then be:
1, add/correct pintype to the sym files
1a, which programs use pintype
1b, identify the correct meaning of pintype values as used today
1c, add missing pintypes (eg. should we have one for nc)
2, remove
I don't think the copper shape / masking / clearance of the via is
necessarily primitive. Granted, in 99.9% of cases it can be described by
circular copper geometry on each connected layer, but support for
arbitrary pad-stacks for components might as well extend to arbitrary
via geometry.
I'm
Restricting to non-metallic frames would seriously impact the available
market, and even on a carbon-fibre frame, is the headset tube
carbon-fibre as well? I would have thought that that bit would be metal
anyway.
That is carbon fiber on my bike. Even if it did restrict the device to
carbon
install Virtual Box on your computer, and then choose a Linux
distro (like linux mint due to its easy setup and install of packages) and
then you are set to go. I have had very good success with this, along with
my students.
Andrew Miner
___
geda
and gEDA!
Andrew Miner
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
Hello,
If you are in PCB and you bring up the command window you can use
ChangeName(Layout)
and it will allow you to change the name of the layout visible in the
fab drawing gerber file.
Which command changes the author name? I tried working with
fab-author (and author and originator along
17 matches
Mail list logo