-mangle disabled)
By keeping the separator as a / everything works.
I was also wrong to say that the operation was different for gnetlist
and gsch2pcb. The operation appears to be the same.
On Thu, 2010-09-02 at 15:40 -0500, Mike Crowe wrote:
Hello group
I am doing my first hierarchial
attribs in the pwd
;;; The file should be a text list of attributes you want listed,
;;; One per line. No comments are allowed in the file.
;;; Questions? Contact m...@ettus.com
;;; This software is released under the terms of the GNU GPL
;; Xml Bill of Materials backend written by Mike Crowe starts
Turned out that the mechanical coupling coefffient is so low that a
stall cannot occur. So Matthew W.'s #1 approach will work for me.
Thanks everyone for the help!
Mike
On Wed, 2010-06-02 at 20:13 +0200, Armin Faltl wrote:
Mike Crowe wrote:
3. More complicated models would vary
Hello
Somewhat off topic, but
I am working on an energy harvesting device which uses a small generator
(100W). I am looking for a spice model that I can use as a template to
create a model for the motor dynamics near stall. Can anyone point me
to a good starting point?
Thanks
Mike
). In addition to modeling the motor, I will need to model
the mechanical components.I looked briefly at the SC site, but it
requires a plug-in that I don't have.
__
From: Mike Crowe mcr...@gcdataconcepts.com
On Tue, 2010-02-02 at 15:55 -0800, Ben Jackson wrote:
On Tue, Feb 02, 2010 at 06:11:44PM -0500, resea...@ottomaneng.com wrote:
I'm also creating symbols for an FPGA and a DSP which naturally has alot
of pins. I've once heard of using multiple files for the symbols so you
For a really
Hello All!
I am building a footprint for an Omron Ultra-low Profile Dome Key
membrane switch (PN: b3d see www.omron.com/ecb/products/pdf/en-b3d.pdf
for details) . The suggested footprint is a solid disk in the middle
and an annular ring around that inner disk.
How do I generate a
OK I have written a crude application that generates a footprint with
pads. I still have to work out the details, but the solution looks to be
workable. Thanks everyone for your ideas!
Mike
On Tue, 2009-05-05 at 15:48 -0400, DJ Delorie wrote:
Do I need to freehand the object in PCB (as
+, Peter Clifton wrote:
On Mon, 2009-02-23 at 16:55 -0600, Mike Crowe wrote:
Hello all
I've generated a preliminary gnetlist backend for generating an xml
based bill of materials.
It seems to be working except that I have to filter the file with sed
after generating the netlist
directly with the
backend toolset (guile)?
2) Who do I contact to get my little backend into the main code
branch? :-)
Thanks
--
+---+
Mike Crowe
Gulf Coast Data Concepts
611 Nicholson Ave
Waveland, MS 39576
e-mail: mcr...@gcdataconcepts.com
--
+---+
Mike Crowe
Gulf Coast Data Concepts
611 Nicholson Ave
Waveland, MS 39576
e-mail: mcr...@gcdataconcepts.com
phone: 228.424.6307
30d 17.753' North 089d 22.022' West
home of the USB-Accelerometer
http://www.gcdataconcepts.com/xlr8r-1.html
: Postscript export.
eps : Encapsulated Postscript
Printers:
lpr : Postscript print.
As usual thanks in advance.
--
+---+
Mike Crowe
Gulf Coast Data Concepts
611 Nicholson Ave
Waveland, MS 39576
e-mail: mcr...@gcdataconcepts.com
phone
On Tue, 2009-01-06 at 12:50 +, Peter Clifton wrote:
On Tue, 2009-01-06 at 13:45 +0100, Werner Hoch wrote:
libgeda (gschem) has an interface where you can connect a database.
So then I write a backend tool that gschem accesses through libgeda that
allows it to access information? If so
On Tue, 2009-01-06 at 20:36 +, Kai-Martin Knaak wrote:
On Tue, 06 Jan 2009 07:26:08 -0500, Dave McGuire wrote:
But database servers, MySQL servers
in particular, are pretty ubiquitous, and the API is easy.
No doubt, a data base can be fine and powerful. However, many tasks have
to
Sorry about the double post.
___
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
I second that. VERY NICE. Finally getting away from that dated DOS app
looking output.
On Mon, 2009-01-05 at 14:25 -0500, Dave McGuire wrote:
On Jan 5, 2009, at 2:02 PM, Kai-Martin Knaak wrote:
Now if we could only do something about that horrid font.
Your wish is Peter Cliftons
There was talk a while ago about integrating gschem with a database.
Any status change on that? Any way I can help implement/test with
mysql?
--
+---+
Mike Crowe
Gulf Coast Data Concepts
611 Nicholson Ave
Waveland, MS 39576
e-mail: mcr
On Mon, 2009-01-05 at 22:12 +, r wrote:
On Mon, Jan 5, 2009 at 10:02 PM, Mike Crowe mcr...@gcdataconcepts.com wrote:
There was talk a while ago about integrating gschem with a database.
Any status change on that? Any way I can help implement/test with
mysql?
What do you mean
I have used these for enclosures in the past. They seem to work OK (no
complaints with moisture build up)
http://www.gore.com/en_xx/products/venting/protective/telecom/adhesive_holder.html
I don't have a good handle though on where to purchase them in small qty
though.
On Thu, 2009-01-01 at
On Mon, 2008-12-01 at 22:14 -0500, DJ Delorie wrote:
Ok, the problem seems to be that your bloat/shrink are set to the
design rules, instead of just a little less. Change them to 9.99 mil
and it works.
I'm not clear where these settings are? Do edit the ~/.pcb/preferences
file manually?
On Tue, 2008-12-02 at 11:34 -0500, DJ Delorie wrote:
On Mon, 2008-12-01 at 22:14 -0500, DJ Delorie wrote:
Ok, the problem seems to be that your bloat/shrink are set to the
design rules, instead of just a little less. Change them to 9.99 mil
and it works.
I'm not clear where these
If an SVG file generated with third party software package (Potrace,
AutoTrace, Inkscape or Delineate, ) exists, then an xslt can in
theory be used to generate output compatible with pcb.
Is someone working on such an xslt?
If not, what would be the best way to import the resulting output
I'd like to second Franks request.
Our company has an established internal parts database (mysql) from
which I'd like to be able to use to stuff attributes with. I've looked
at the raw schematic file format and it appears to be straight forward
(except for auto placement on the schematic of
On Fri, 2008-10-10 at 21:23 +0200, Bert Timmerman wrote:
Cool beans! I've looked at the code (very briefly) and have a few
questions. See below.
Hi Mike,
On Fri, 2008-10-10 at 09:21 -0500, Mike Crowe wrote:
Hi all
Another question for the group.
Is anyone working
Hi all
Another question for the group.
Is anyone working on a tool or know how to import a pcb layout to an
IGES file?
Background
I just did my second design with PCB. Works great! Kudos to you all!
unfortunately for me, when we assembled the prototype, one of the
components had a
Hello
I am trying to automate my Gerber generation process through a Makefile
(use the hammer that you know:-). I see that PCB as a command line
option --script filename that could potentially be used to export the
Gerber's and then exit. Something like this
...
export gerber
On Wed, 2008-09-24 at 12:26 -0400, DJ Delorie wrote:
You can export directly from the command line:
pcb -x gerber $*.pcb
Wow! just what I was looking for! Thanks.
___
geda-user mailing list
geda-user@moria.seul.org
27 matches
Mail list logo
