--- "Matthias F. Brandstetter" <[EMAIL PROTECTED]> wrote:
> -- quoting Joshua Banks --
> > Thanks Matthias.
>
> you're welcome ;)
> please report if you succeeded with your 2nd NIC!
Pretty painless once all the research was done. The most confusing part
was the fact that my nic c
--- Alan <[EMAIL PROTECTED]> wrote:
> > > 3) The network card connecting to the cable modem will
> negotiating at
> > > 10baseT-HD or 10Mb half-duplex. The other nic on the internal lan
> will
> > > be running at 100baseTX-HD. Are there any any foreseen horrors
> with
> > > this type of setup (spe
--- Tom Hosiawa <[EMAIL PROTECTED]> wrote:
> > Then you can just modify values in /etc/conf.d/net for your 2nd NIC
> and
> > after a reboot you should be fine.
>
> I had problems setting the gateway for both nics in a single file, so
> I
> made separate net.eth0 and net.eth1 files in /etc/conf.d
> > 3) The network card connecting to the cable modem will negotiating at
> > 10baseT-HD or 10Mb half-duplex. The other nic on the internal lan will
> > be running at 100baseTX-HD. Are there any any foreseen horrors with
> > this type of setup (specifically downloading and file transfers going
> >
> Then you can just modify values in /etc/conf.d/net for your 2nd NIC and
> after a reboot you should be fine.
I had problems setting the gateway for both nics in a single file, so I
made separate net.eth0 and net.eth1 files in /etc/conf.d
I'm not sure if this is the correct way of doing things
--- "Matthias F. Brandstetter" <[EMAIL PROTECTED]> wrote:
> -- quoting Joshua Banks --
> > Thanks Matthias.
>
> you're welcome ;)
> please report if you succeeded with your 2nd NIC!
Will do.
Thanks,
JBanks
__
Do you Yahoo!?
New Yahoo! Photos - e
-- quoting Joshua Banks --
> Thanks Matthias.
you're welcome ;)
please report if you succeeded with your 2nd NIC!
Greets, Matthias
--
I saw weird stuff in that place last night. Weird, strange, sick,
twisted, eerie, godless, evil stuff. And I want in.
-- Homer
--- "Matthias F. Brandstetter" <[EMAIL PROTECTED]> wrote:
> -- quoting Joshua Banks --
> > 1) Can I just follow the same instructions within the Intial Gentoo
> > Install guide to get this Second card to work and,
>
> yep, should be pretty straight forward. shutdown, insert NIC, b
-- quoting Joshua Banks --
> 1) Can I just follow the same instructions within the Intial Gentoo
> Install guide to get this Second card to work and,
yep, should be pretty straight forward. shutdown, insert NIC, boot, compile
NIC drivers (say: kernel modules, make modules modules_
Hello,
I'm going to be putting another network card into my Gentoo box as soon
as Comcast goes live with the highspeed internet. Right now I'm using:
Ethernet controller: Lite-On Communications Inc LNE100TX (rev 20)
Subsystem: Netgear FA310TX
I will be adding a 3Com 3C905-TX (Rev A) as the secon
10 matches
Mail list logo