Hello all,
How to unsuscribe from this list?
Thank you
Bayrouni
--
gentoo-user@gentoo.org mailing list
Hello all,
I have this error when trying to emerge
app-laptop/acpi4asus.
I am using the linux-2.6.18-gentoo-r6 kernel (source installed).
Thank you for anay help.
emerge app-laptop/acpi4asus:
[SNIP]
...
* Found sources for kernel version:
* 2.6.18-gentoo-r6
>>> Unpacking source...
>>> U
use after reading their man pages.
You can also create a script to do the work for you.
This is only for command line lovers .
Bayrouni
--
gentoo-user@gentoo.org mailing list
Bayrouni a écrit :
Sorry, my post was destined to an other mailing list.
It time for me to go to bed.
Here it is 3:55
Good night.
--
gentoo-user@gentoo.org mailing list
Hello all,
cat /etc/conf.d.hostname
# /etc/conf.d/hostname
# Set to the hostname of this machine
HOSTNAME="MYHOST"
and cat /etc/conf.d/domainname
DNSDOMAIN="MYDOMAIN"
The hostname service is added to the /etc/init.d/ with rc-update,
but the commande hostname give:
#hostname
MYHOST
and
# hostn
Etaoin Shrdlu a écrit :
> On Monday 19 February 2007 11:32, Bayrouni wrote:
>
>> Hello all,
>>
>> cat /etc/conf.d.hostname
>> # /etc/conf.d/hostname
>>
>> # Set to the hostname of this machine
>> HOSTNAME="MYHOST"
>>
>> and
Etaoin Shrdlu a écrit :
> On Monday 19 February 2007 12:12, Bayrouni wrote:
>
>> I added this line in /etc/conf.d/net:
>> dns_domain_lo="MY_DOMAIN"
>>
>>
>> I restarted the net.lo but still the same result:
>> # domainname
>> (none)
>&
Etaoin Shrdlu a écrit :
> On Monday 19 February 2007 12:46, Bayrouni wrote:
>
>>
>>
>> but domainname --> (none)
>
> domainname does NOT show the DNS domain.
> Use dnsdomainname or domainname -d instead.
All right.
dnsdomainname and domainname -d ---> my
Sylvain Chouleur a écrit :
1) I'm sorry but don't understand what 'top post' means
When you reply don't write your message at the top but at the bottom.
just at the bottom.
In other words, write at the last line.
--
gentoo-user@gentoo.org mailing list
Hello all,
I have an integrated sound chip using snd-hda-intel driver.
The chipset is MCP51 High Definition Audio
I used this page to set my soundcard:
http://kompi.homelinux.org/home/patrick/asus_a6tc-howto/#sound
But still I have not the correct sound devices.
I am under gentoo.
The soun
t; Loopback device support.
At least in 6.11.x.
Regards,
/M
On 4/14/05, Al Bayrouni <[EMAIL PROTECTED]> wrote:
The loop device is not supported by the kernel so I need to compile it
with the new support and my question is :
where exactly in the menuconfig I need to do the modification? or
Tim Beck wrote:
Just curious...is it a very very faint blinking, or is it a more
dramatic blackening effect?
I noticed the same thing with my workstation (which also has an nvidia
card) and just thought I was nuts. But it doesn't seem to do it in
windows, so...
On 4/14/05, Al Bayrouni &l
Hello,
I tried to find a good mirror from me.
I used netselect rsync.gentoo.org .
The command run for 30s, but dasen't output anything!!
Thank you for your help
Bayrouni
--
gentoo-user@gentoo.org mailing list
Hello,
I tried to find a good mirror from me.
I used netselect rsync.gentoo.org .
The command run for 30s, but dasen't output anything!!
Thank you for your help
Bayrouni
--
gentoo-user@gentoo.org mailing list
Hello,
I just installed gentoo 3 days ago.
I don't understand the difference between GENTOO_MIRRORS and SYNC when
using emerge --sync.
Thank you for your help.
Al Bayrouni
--
gentoo-user@gentoo.org mailing list
CONFIG_IDEDMA_ONLYDISK=y
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
when running hdparm /devhda , the dma is off.
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_AUTO=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
idem for hdb
thank you for any idea.
Al Bayrouni
Richard Fish wrote:
Al Bayrouni wrote:
Hello all,
My 2 IDE DISKS want support DMA with gentoo.
Could you post the output of lspci and dmesg. For the dmesg output, the
interesting section should look something like this:
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
PCI: Enabling
Benno Schulenberg wrote:
Al Bayrouni wrote:
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_IDEDMA_ONLYDISK=y
This doesn't look right. Did you configure the kernel by hand?
Or by using genkernel? If so, try it with 'make menuconfig' to
get a consistent config.
Benno
Thank y
Al Bayrouni wrote:
Benno Schulenberg wrote:
Al Bayrouni wrote:
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_IDEDMA_ONLYDISK=y
This doesn't look right. Did you configure the kernel by hand? Or by
using genkernel? If so, try it with 'make menuconfig' to get a
consistent config.
B
Hello,
I need to install wxgtk2.2 because I have one program that uses it.
But the package found in portage is wxgtk2.4.
What do you recomend to me?
Thank you
Al Bayrouni
--
gentoo-user@gentoo.org mailing list
Edward Catmur wrote:
On Sun, 2005-04-17 at 23:15 +0200, Al Bayrouni wrote:
I need to install wxgtk2.2 because I have one program that uses it.
But the package found in portage is wxgtk2.4.
The old ebuilds (earliest is 2.2.9) are still accessible via the gentoo
viewcvs:
http://www.gentoo.org/cgi
or reading not allowed
please, create one with xbindkeys --default vers //.xbindkeysrc.
Failed to start local
Thank you
Al Bayrouni
--
gentoo-user@gentoo.org mailing list
lp.
kernel 2.6.11-r6
Bayrouni
--
gentoo-user@gentoo.org mailing list
Christoph Gysin wrote:
Al Bayrouni wrote:
When I tried to install k3b, I had this error:
collect2: ld returned 1 exit status
make[2]: *** [lavplay] Erreur 1
make[2]: Leaving directory
`/var/tmp/portage/mjpegtools-1.6.2-r3/work/mjpegtools-1.6.2/lavtools'
make[1]: *** [all-recursive] Erreur 1
Christoph Gysin wrote:
Al Bayrouni wrote:
There is a bug while compiling media-video/mjpegtools.
Yep.
It is referenced in bugzilla.gentoo.org as NEW.
AFAIR the problem has been solved. It just needs some dev who writes a
proper solution back into cvs.
k3b depends on mjpegtools so k3b emerge
Hello all
I have one movie dvd that I had get at dvdtheque.
I can't read it.
which libraries I need?
Thank you
Bayrouni.
--
gentoo-user@gentoo.org mailing list
messages.
Thank you
Bayrouni
--
gentoo-user@gentoo.org mailing list
.
Thank you
Bayrouni
--
gentoo-user@gentoo.org mailing list
.
Thank you
Bayrouni
--
gentoo-user@gentoo.org mailing list
Sorry.
THIS POSTS are result of problems with my smtp.(my provider)
--
gentoo-user@gentoo.org mailing list
HELLO all,
How can I output only packages that are installed on my system.
and not those that aren't.
example: emerge search kde output really all packages containing the
word kde. It is very hard to read all this just to verify that one or 2
kde packs are or not installed.
Thank you
Bay
thank you very much for your answers
Bayrouni.
--
gentoo-user@gentoo.org mailing list
.
Thank you
Bayrouni
--
gentoo-user@gentoo.org mailing list
--
gentoo-user@gentoo.org mailing list
=/tmp/qemu.log)
-p pagesize set the host page size to 'pagesize
So qemu-i386 is not qemu prog.
But where is the qemu prog that accespt this command: qemu -cdrom
/path/to/iso
Thank you for your help
Bayrouni.
--
gentoo-user@gentoo.org mailing list
Al Bayrouni wrote:
Hello all,
I compiled the kernel-2.6.11-r6 with videoforlinux support and conexant
2388xx support.
When I modprobe cx88xx I have this error:
FATAL: Error inserting cx88xx
(/lib/modules/2.6.11-gentoo-r6/kernel/drivers/media/video/cx88/cx88xx.ko):
Unknown symbol in module, or
ode d'ïat d'exïution
make: *** [console/fbtv] Erreur 1
!!! ERROR: media-tv/xawtv-3.86-r2 failed.
!!! Function src_compile, Line 55, Exitcode 2
!!! (no error message)
!!! If you need support, post the topmost build error, NOT this status
message.
Bayrouni
--
gentoo-user@gentoo.org mailing list
Al Bayrouni wrote:
Hello,
I cannot emerge xawtv.
The output is:
console/fs.o(.text+0x587): In function `fs_connect':
: undefined reference to `FSOpenServer'
console/fs.o(.text+0x5a4): In function `fs_connect':
`fs_open':
: undefined reference to `FSQueryXBitmaps16'
udev (in grub I add gentoo=nodevfs).
Thank you
Bayrouni
--
gentoo-user@gentoo.org mailing list
Hello,
I like gentoo but I hate to pass hours (sometimes days) for installing
what I need.(celeron 2GH is not fast machine)
So my question is:
Is it possible to install only binaries (if they exist).
Thank you very much
Bayrouni.
--
gentoo-user@gentoo.org mailing list
Steven Susbauer wrote:
Johannes Weiner wrote:
On Mon, May 23, 2005 at 09:53:36AM +0200, Al Bayrouni wrote:
Hello,
I like gentoo but I hate to pass hours (sometimes days) for
installing what I need.(celeron 2GH is not fast machine)
So my question is:
Is it possible to install only
Hello all,
I just installed nvidia-glx and it is running.
But the screeng semms like ((blinking)).
Thank you for any help.
2.6.11-gentoo-r3
--
gentoo-user@gentoo.org mailing list
Hello all,
I just installed nvidia-glx and it is running.
But the screeng semms like ((blinking)).
Thank you for any help.
2.6.11-gentoo-r3
--
gentoo-user@gentoo.org mailing list
--
gentoo-user@gentoo.org mailing list
mar 10 18:47 /dev/loop6
brw-rw 1 root disk 7, 7 mar 10 18:47 /dev/loop7
Thank you for your help.
Bayrouni
--
gentoo-user@gentoo.org mailing list
Richard Fish wrote:
Al Bayrouni wrote:
Hello all,
I want to mount an iso file ont /mnt/iso directorie.
I have this message when I run this command:
mount /mnt/packages-x86-2005.0.iso /mnt/iso -o loop=/dev/loop0,
/dev/loop0: no such file or directorie
Do you have the 'loop' bl
n `-o loop'
is given), then mount will try to find some unused loop device and use
that."
Regards,
/Magnus
On 4/14/05, Al Bayrouni <[EMAIL PROTECTED]> wrote:
Hello all,
I want to mount an iso file ont /mnt/iso directorie.
I have this message when I run this command:
mount /mnt/pa
45 matches
Mail list logo
