[gentoo-user] Issues with Gentoo & WinXP dualboot setup

2006-06-04 Thread Dmitry Mashkovskiy
Hello, I've successfully set up Gentoo on the machine with ABIT IS7 motherboard and two SATA disks (integrated controller on ICH5 chipset, I guess). The first one is Seagate (Ch2 M. (master?) in BIOS) with WinXP, the second is Maxtor (Ch3 M. in BIOS) with Gentoo and GRUB in MBR. One problem is

Re: [gentoo-user] Issues with Gentoo & WinXP dualboot setup

2006-06-05 Thread Andreas Claesson
On 6/5/06, Dmitry Mashkovskiy <[EMAIL PROTECTED]> wrote: Hello, I've successfully set up Gentoo on the machine with ABIT IS7 motherboard and two SATA disks (integrated controller on ICH5 chipset, I guess). The first one is Seagate (Ch2 M. (master?) in BIOS) with WinXP, the second is Maxtor (Ch3

Re: [gentoo-user] Issues with Gentoo & WinXP dualboot setup

2006-06-05 Thread Maxim
> I get only > > Booting 'Windows XP' > rootnoverify (hd1,0) > makeactive > chainloader +1 > > and then machine hangs. So I have to set Seagate drive as a boot device > in BIOS in order to boot Windows. How can I work it out? Should I > install GRUB in the MBR of Windows disk? > Another problem is

Re: [gentoo-user] Issues with Gentoo & WinXP dualboot setup

2006-06-05 Thread Shaochun Wang
On Mon, Jun 05, 2006 at 04:01:10PM +1100, Dmitry Mashkovskiy wrote: > Hello, > > I've successfully set up Gentoo on the machine with ABIT IS7 motherboard > and two SATA disks (integrated controller on ICH5 chipset, I guess). The > first one is Seagate (Ch2 M. (master?) in BIOS) with WinXP, the s

Re: [gentoo-user] Issues with Gentoo & WinXP dualboot setup

2006-06-15 Thread Dmitry Mashkovskiy
Hi again! I'm late a little :) I believe the problem is that Windows expect to be installed on the first disk and when it is not it fail to start. Try adding this before the rootnoverify line: map hd0 hd1 map hd1 hd0 This will make the bios change the order of the disks and Windows will hop