Re: [gentoo-user] Can't get the GUI to stay up for more than a minute or so before crashing

On Thursday, 27 June 2024 07:54:43 BST Dale wrote: > Update. I played around a bit. I figured I didn't have a lot to lose > here. It either works, or it doesn't. After playing around a bit, I > got it to work. I have not restarted it to see if it will work again, > yet. I wanted to grab some

Re: [gentoo-user] ldconfig segfaults after updating to 23.0 profil

On Thursday, 27 June 2024 20:11:51 BST Dan Johansson wrote: > Hello, > > After updating my system to a 23.0 profile, > default/linux/amd64/23.0/split-usr/desktop/plasma (stable), ldconfig has > started segfaulting. The 23.0 profile uses merged /usr as its default. You can, however, remain with

Re: [gentoo-user] Can't get the GUI to stay up for more than a minute or so before crashing

amily > visit to the hospital drained me good. And she is still sick. I took > her some tomatoes this morning and she likes the peaches I got for her > too. Not much she can eat. > > I've tried with no xorg.conf at first. Then I tried with one that tells > it to use the nvidia d

Re: [gentoo-user] Can't get the GUI to stay up for more than a minute or so before crashing

On Tuesday, 25 June 2024 19:54:33 BST Dale wrote: > Michael wrote: > > You need to have USE="elogind -systemd" in your make.conf, then add the > > elogind service to the *boot* runlevel as shown here: > > > > https://wiki.gentoo.org/wiki/Elogind >

Re: [gentoo-user] SOLVED Can't get the GUI to stay up for more than a minute or so before crashing

On Wednesday, 26 June 2024 01:28:47 BST Dale wrote: > Michael wrote: > > The above message indicates the same problem you had experienced before > > you > > reinstalled. The monitor is not sending its EDID table, or the card can't > > read it. > > > > Yo

Re: [gentoo-user] Can't get the GUI to stay up for more than a minute or so before crashing

On Thursday, 27 June 2024 23:52:25 BST Dale wrote: > Michael wrote: > > [snip ...] > > [30.345] (II) modeset(0): [DRI2] DRI driver: nouveau <== Not nvidia > > == > > > > [snip ...] > > [30.295] (II) modeset(0): Output DP-1 disconnected >

Re: [gentoo-user] {SOLVED} Midnight Commander now viewing images with /usr/bin/xdg-open?!?!

On Tuesday, 2 July 2024 18:30:31 BST Walter Dnes wrote: > Midnight Commander has been using geeqie for viewing images on my > system. I did a world update last night. Apparently image-viewing > responsibility has been handed over to /usr/bin/xdg-open which, on my > system, uses mupdf for

Re: [gentoo-user] ldconfig segfaults after updating to 23.0 profil

On Tuesday, 2 July 2024 20:05:37 BST Dan Johansson wrote: > On 27.06.24 21:37, Michael wrote: > > On Thursday, 27 June 2024 20:11:51 BST Dan Johansson wrote: > >> Hello, > >> > >> After updating my system to a 23.0 profile, > >> default/linux/amd64/23.

Re: [gentoo-user] New monitor, new problem. Everything LARGE O_O

On Tuesday, 2 July 2024 19:58:59 BST Dale wrote: > Howdy, > > New monitor came in. Found it on my porch. Unboxed it and hooked it > up. Started with no xorg.conf file. It's high res, plasma comes up so > all that is fine. Now comes the problem. Everything is HUGE. Even on > SDDM screen,

Re: [gentoo-user] world upgrade a mess, need some advise

On Wednesday, 3 July 2024 01:34:12 BST Dale wrote: > Eli Schwartz wrote: > > On 7/2/24 7:33 PM, Dale wrote: > >> What I wish, emerge would spit the information out after it completes > >> instead of putting fairly important info in some log files somewhere for > >> a person to go dig and find. It

Re: [gentoo-user] New monitor, new problem. Everything LARGE O_O

On Wednesday, 3 July 2024 10:22:33 BST Dale wrote: > Another update. I rebooted several times to make sure whether things > would be consistent. Most of the time, it came up as it should. Some > times, not so much. When I had just the new Samsung monitor connected, > it was consistent. When

Re: [gentoo-user] EDID file name for kernel?

On Friday, 5 July 2024 15:52:27 BST Jack wrote: > On 7/5/24 10:20 AM, Peter Humphrey wrote: > > Hello list, > > > > The monitor on this box is connected via a KVM switch, which may not be > > set to this machine at boot time. Then I get a default VT screen size > > which is too tall - it can't

Re: [gentoo-user] New monitor, new problem. Everything LARGE O_O

On Saturday, 6 July 2024 10:59:30 BST Dale wrote: > Mark Knecht wrote: > > On Tue, Jul 2, 2024 at 12:44 PM Dale > > wrote: > > > > > > > I tried it with those options and without. Neither changed anything. I > > > originally tried it with no xorg.conf at all. I

Re: [gentoo-user] New monitor, new problem. Everything LARGE O_O

On Saturday, 6 July 2024 17:11:23 BST Dale wrote: > Michael wrote: > > On Saturday, 6 July 2024 10:59:30 BST Dale wrote: > >> Mark Knecht wrote: > >>> On Tue, Jul 2, 2024 at 12:44 PM Dale >>> <mailto:rdalek1...@gmail.com>> wrote: > >>&

Re: [gentoo-user] Video card temp and fan sensors.

On Sunday, 7 July 2024 03:54:06 BST Dale wrote: > Alexandru N. Barloiu wrote: > > With nvidia driver, you have to use nvidia-smi utility to get that > > information. While the driver takes over the hardware, no other type > > of software can access same sensors. So when using nvidia-drivers, no >

Re: [gentoo-user] New monitor, new problem. Everything LARGE O_O

On Monday, 8 July 2024 15:52:03 BST Peter Humphrey wrote: > On Monday 8 July 2024 13:59:27 BST Wol wrote: > > On 08/07/2024 13:27, Dale wrote: > > > I don't know about cell phones but if using the youtube app, I'd think > > > it would know what you are using and the resolution too. > > > > BBC

Re: [gentoo-user] Emails are no indexable

On Monday, 8 July 2024 16:07:59 BST Vitaly Zdanevich wrote: > Hi, I tried to google in "exact match" a few sentences from this email > list - and nothing found. For example this mirroring > https://marc.info/?l=gentoo-user=171984189706185=2 - and nothing in > Google. Is it excluded from search?

Re: [gentoo-user] New monitor, new problem. Everything LARGE O_O

On Sunday, 7 July 2024 23:29:21 BST Frank Steinmetzger wrote: > Am Sun, Jul 07, 2024 at 05:10:18PM -0500 schrieb Dale: > > It's hi res and a good deal. :-D > > >>> > > >>> Please define hi res. Full HD at 32″ is definitely not hi res. ;-P > > >>> It’s about as much as CRTs back in the day,

Re: [gentoo-user] New monitor, new problem. Everything LARGE O_O

On Monday, 8 July 2024 00:14:59 BST Wol wrote: > On 07/07/2024 23:29, Frank Steinmetzger wrote: > > It also goes into the other direction: people these days™ watch 4K movies > > on their phones. Why, just why? Even if the screen can display it > > physically, their eyes cannot resolve that fine

Re: [gentoo-user] New monitor, new problem. Everything LARGE O_O

On Monday, 8 July 2024 00:57:40 BST Dale wrote: > Frank Steinmetzger wrote: > > Am Sun, Jul 07, 2024 at 05:10:18PM -0500 schrieb Dale: > >> It's hi res and a good deal. :-D > > > > Please define hi res. Full HD at 32″ is definitely not hi res. ;-P > > It’s about as much as CRTs

Re: [gentoo-ppc-user] Kernel panic booting minimal iso on dual G5

can't build one, you can ask in #gentoo-ppc64 on Freenode. Greets, Michael -- Gentoo Linux Developer using m0n0wall | http://hansmi.ch/ I dunno, I dream in Perl sometimes... -- Larry Wall in [EMAIL PROTECTED] pgpW70I3NhB4L.pgp Description: PGP signature

Re: [gentoo-ppc-user] env-update

Hello Before updating portage there was an extra line in the output too: * Caching service dependencies... [ok] Now its gone. Things seems working ok, but I wonder if this is normal, or not... That's normal. rc automatically caches the dependencies now. Greets, Michael -- Gentoo Linux

Re: [gentoo-ppc-user] Compile error on IDE Power Mac driver

CONFIG_BLK_DEV_IDEDMA_PCI, see drivers/ide/ide-dma.c. Greets, Michael -- Gentoo Linux Developer using m0n0wall | http://hansmi.ch/ Debian is the Jedi operating system: Always two there are, a master and an apprentice. -- Simon Richter on debian-devel pgpxm2AmC1HTI.pgp Description: PGP signature

Re: [gentoo-ppc-user] Audio installation

, but preemption on PowerPC isn't what you actually want. It causes programs to crash because of a corrupted cache. It used to work when one enabled SMP, but I'm not sure wether this is still the case. Greets, Michael -- Gentoo Linux developer, http://hansmi.ch/, http://forkbomb.ch/ In most countries selling

Re: [gentoo-ppc-user] Audio installation

have its sound chip supported yet (but will with snd-aoa). Digital output is said not to work for now, but it's planned to be included in snd-aoa once they figure it out. Oh, and please learn how to quote. First and last warning from me. Greets, Michael [1] http://johannes.sipsolutions.net/snd

Re: [gentoo-ppc-user] pbbuttonsd question

Hello On Sat, May 27, 2006 at 11:24:05AM -0400, Eric Robertson wrote: I am running gentoo on a 15 aluminum powerbook. Which exact model? grep machine /proc/cpuinfo Depending on that, you've the LMU behind the PMU or on I²C. Thanks, Michael -- Gentoo Linux developer, http://hansmi.ch/, http

Re: [gentoo-ppc-user] hda/hdc

Hello Randy On Sun, Jan 14, 2007 at 09:54:23PM -0500, Randy Barlow wrote: is there a way to see what the dmesg was for a kernel that didn't finish booting due to a kernel panic? Yes, netconsole as described in Documentation/networking/netconsole.txt. Greets, Michael -- Gentoo Linux

Re: [gentoo-ppc-user] hda/hdc

able to do it, and I even copied the config from that cd over as per the genkernel instructions, still to no avail. You copied the actually running config from /proc/config.gz? Greets, Michael -- Gentoo Linux developer, http://hansmi.ch/, http://forkbomb.ch/ pgpKoPuFHS7d8.pgp Description: PGP

Re: [gentoo-ppc-user] KDE completely broken

, in case you have it. Depending on where the crash happens, you may have to recompile not only KDE, but also other packages from KDE's dependencies. Greets, Michael -- http://hansmi.ch/ -- [EMAIL PROTECTED] mailing list

[gentoo-user] Re: Installing via GRML

). Michael -- gentoo-user@lists.gentoo.org mailing list

Re: [gentoo-user] Single click is interpreted as double click

that (see attached files), but that also was of no help :( Too bad... :/ Thanks for the time you spent so far! Michael X.Org X Server 1.4.0 Release Date: 5 September 2007 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.23-gentoo-r5.r08.mit-ide-mod_2 i686 Current Operating System

[gentoo-user] [SOLVED] Re: Single click is interpreted as double click

Sascha Hlusiak wrote: What if you now change the InputDeviceUSB Maus SendCoreEvents to InputDeviceUSB Maus CorePointer ? YEAH! That solved it. I can now single click again. Most excellent. Thanks a lot! - -- Michael Schmarck [EMAIL PROTECTED] -- View

[gentoo-user] Re: Is Gentoo on the Sales block?

they originally were located). Most of the work in the OS MySQL database is sponsored by MySQL AB. GPL? A license. What about it? 42 °C. Is gentoo next? No. There's nothing you can buy. Michael -- gentoo-user@lists.gentoo.org mailing list

[gentoo-user] Re: Is GWN dead?

? Sabayon is a distribution of itself. Sure, it's based on Gentoo, but it certainly has its own vision and thus also its own userbase. The userbase of Gentoo and Sabayon don't have to be identical. What works for them, doesn't have to work for us. Michael -- gentoo-user@lists.gentoo.org mailing list

[gentoo-user] Re: Once again baffled by portage

, KCachegrind, Kompare, Umbrello,... License: GPL-2 Yep. There it says: kdesdk also offers Kompare. Hm, why would you want to install Kompare, if you already have it installed? Michael Schmarck -- Why would anyone want to be called Later? -- gentoo-user@lists.gentoo.org mailing

[gentoo-user] Re: SANDBOX - state of the art?

=linux LCD_DEVICES=bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text LINGUAS=de USERLAND=GNU VIDEO_CARDS=nv nvidia vga none Unset: CPPFLAGS, CTARGET, INSTALL_MASK, LC_ALL, LDFLAGS, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS Michael -- gentoo-user

[gentoo-user] RAM upgrade, kernel and swap

So, I just got 2 GB of RAM in the mail. Whoo hoo. Before I pop these in, soliciting any thoughts about the following: zcat /proc/config.gz |grep MEM CONFIG_SHMEM=y # CONFIG_TINY_SHMEM is not set # CONFIG_NOHIGHMEM is not set CONFIG_HIGHMEM4G=y # CONFIG_HIGHMEM64G is not set CONFIG_HIGHMEM=y

[gentoo-user] cron and ssmtp

Hello, folks -- Is anyone using cron (vixie-cron) without a real MTA and getting emails? The test is simple, just echo hello world. I expect this to come as an email to the address I put in MAILTO=. But it doesn't. No dead.letter to be found either. Not having found any examples of folks using

Re: [gentoo-user] cron and ssmtp

On Tue, 22 Jan 2008 15:48:05 + Neil Bothwick [EMAIL PROTECTED] wrote: On Tue, 22 Jan 2008 07:36:46 -0800, Michael Higgins wrote: Is anyone using cron (vixie-cron) without a real MTA and getting emails? The test is simple, just echo hello world. I expect this to come as an email

Re: [gentoo-user] cron and ssmtp

On Tue, 22 Jan 2008 22:37:32 +0100 Jan Seeger [EMAIL PROTECTED] wrote: On Tue, 22 Jan 2008 07:36:46 -0800, Michael Higgins wrote: Is anyone using cron (vixie-cron) without a real MTA and getting emails? The test is simple, just echo hello world. I expect this to come

Re: [gentoo-user] RAM upgrade, kernel and swap

On Tue, 22 Jan 2008 00:44:53 +0100 Hemmann, Volker Armin [EMAIL PROTECTED] wrote: On Montag, 21. Januar 2008, Michael Higgins wrote: So, I just got 2 GB of RAM in the mail. Whoo hoo. Before I pop these in, soliciting any thoughts about the following: zcat /proc/config.gz |grep MEM

Re: [gentoo-user] tone generator

On Thu, 24 Jan 2008 20:15:14 -0800 (PST) maxim wexler [EMAIL PROTECTED] wrote: something like this should do it: gcc -D LINUX -include string.h -lm -o tonegen tonegen.c Yup. Thanks Iain. ++ Very handy. ;-) -- |\ /|| | ~ ~ | \/ ||---| `|`

[gentoo-user] OT - Installing VMWare eval - Where are the rc0 directories?

I'm trying to install the evaluation copy of vmware workstation 6 and the installer is asking me: What is the directory that contains the init directories (rc0.d/ to rc6.d/)? What's the answer to this? AFAIK, these directories do not exist on Gentoo. What should I do? Do I need to create

Re: [gentoo-user] Can't use gnome! [SOLVED]

On Fri, 2008-01-25 at 20:04 +0100, b.n. wrote: Michael Sullivan ha scritto: I rebooted into Linux a couple of days ago and tried to log into gnome, and a whole bunch of error messages popped up. They all said basically this: There was an error loading config from /apps/gnome-terminal

[gentoo-user] Can't use gnome!

to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://www.gnome.org/projects/gconf/ for information. (Details - 1: IOR file '/tmp/gconfd-michael/lock/ior' not opened successfully, no gconfd located: No such file or directory 2: IOR file '/tmp/gconfd

Re: [gentoo-user] tone generator

On Fri, 25 Jan 2008 10:59:25 -0800 (PST) maxim wexler [EMAIL PROTECTED] wrote: Not sure if that's what you want, but speaker-test from alsa-utils can generate sine waves, pink and white noise. [EMAIL PROTECTED] ~ $ speaker-test -t 2 speaker-test 0.0.8 Playback device is plughw:0,0

Re: [gentoo-user] OT - Installing VMWare eval - Where are the rc0 directories?

On Sat, 2008-01-26 at 02:18 -0500, Andrey Falko wrote: On Jan 25, 2008 10:03 PM, Michael Sullivan [EMAIL PROTECTED] wrote: I'm trying to install the evaluation copy of vmware workstation 6 and the installer is asking me: What is the directory

Re: [gentoo-user] OT - Installing VMWare eval - Where are the rc0 directories?

On Sat, 2008-01-26 at 06:35 -0600, Michael Sullivan wrote: On Sat, 2008-01-26 at 02:18 -0500, Andrey Falko wrote: On Jan 25, 2008 10:03 PM, Michael Sullivan [EMAIL PROTECTED] wrote: I'm trying to install the evaluation copy of vmware workstation 6

[gentoo-user] VM Ware or not?

Hello, folks -- Most days, I work remotely from the 'ndoze net via rdesktop when I have to access it for some reason. But the bandwidth there is getting choked as others follow suit. I'm thinking I'd have a better time of it if I just had my own little toybox -- I mean, Windows XP installation

[gentoo-user] Weird problem while emerging virtualbox

I tried to emerge virtualbox, and I got this: Emerging (1 of 1) app-emulation/virtualbox-1.5.2-r1 to / * VirtualBox-1.5.2_OSE.tar.bz2 RMD160 SHA1 SHA256 size ;-) ... [ ok ] * checking ebuild checksums ;-) ... [ ok ] * checking auxfile checksums ;-) ... [ ok ] * checking miscfile checksums

Re: [gentoo-user] VM Ware or not?

On Tue, 29 Jan 2008 19:49:30 + Neil Bothwick [EMAIL PROTECTED] wrote: On Tue, 29 Jan 2008 11:20:38 -0800, Michael Higgins wrote: So, the quick question is, is VM Ware the best way to go? I think XP is still lurking on a partition here... and I do need to run Internet Extorter

Re: [gentoo-user] VM Ware or not?

On Fri, 2008-02-01 at 11:32 +0100, Pintér Tibor wrote: works fine more me, and always worked. workstation 5.5 has issues with it though, so upgrade to 6.0.x t Peter Humphrey wrote: On Wednesday 30 January 2008 19:58:26 Vladimir G. Ivanovic wrote: I cannot get bridged netwokring to

Re: [gentoo-user] VM Ware or not?

On Fri, 2008-02-01 at 09:40 -0500, Jerry McBride wrote: On Friday 01 February 2008 08:21:38 am Michael Sullivan wrote: On Fri, 2008-02-01 at 11:32 +0100, Pintér Tibor wrote: works fine more me, and always worked. workstation 5.5 has issues with it though, so upgrade to 6.0.x t

Re: [gentoo-user] VM Ware or not?

On Fri, 2008-02-01 at 16:47 +, Peter Humphrey wrote: On Friday 01 February 2008 13:21:38 Michael Sullivan wrote: Hos anyone been able to get 6.0.2 to work? Of what? I'm running app-emulation/vmware-server-1.0.4.56528 with no problems. -- Rgds Peter app-emulation/vmware

Re: [gentoo-user] VM Ware or not?

On Fri, 1 Feb 2008 16:47:28 + Peter Humphrey [EMAIL PROTECTED] wrote: On Friday 01 February 2008 13:21:38 Michael Sullivan wrote: Hos anyone been able to get 6.0.2 to work? Yes. I posted pretty much the whole session to the list. app-emulation/vmware-workstation-6.0.2.59824 is what I

Re: [gentoo-user] Re: Portage behaviour with Masked packages - Gaim

On Mon, 2008-02-04 at 15:11 +, Mick wrote: On Monday 04 February 2008, Michael Schmarck wrote: Michael Sullivan [EMAIL PROTECTED] wrote: Why is gaim no longer in portage? Is it dead upstream? It has been renamed to Pidgin in 2007 to prevent some legal issues with AOL

Re: [gentoo-user] Portage behaviour with Masked packages - Gaim

On Mon, 2008-02-04 at 08:14 +, Mick wrote: Hi All, Kevin's previous message alerted me to the fact that Gaim has been deprecated. Sure enough I see this: [D] net-im/gaim Available versions: [M] 1.5.0 [cjk debug eds gnutls krb4 nas nls perl silc spell

[gentoo-user] Re: Portage behaviour with Masked packages - Gaim

Michael Sullivan [EMAIL PROTECTED] wrote: Why is gaim no longer in portage?  Is it dead upstream? It has been renamed to Pidgin in 2007 to prevent some legal issues with AOL and their AIM product. Michael -- gentoo-user@lists.gentoo.org mailing list

[gentoo-user] Re: openexr vs. ilmbase

-libs/openexr-1.5.0' emerge openexr Michael -- gentoo-user@lists.gentoo.org mailing list

[gentoo-user] No sound in mythfrontend

I have no sound in mythfrontend anymore. Here's the emerge information: camille ~ # emerge -pv mythtv These are the packages that would be merged, in order: Calculating dependencies... done! [ebuild R ] media-tv/mythtv-0.20.2_p14972 USE=alsa dvb dvd ivtv jack joystick lirc mmx opengl perl

[gentoo-user] [OT] Trying to use xauth - Xlib: No protocol specified

18 c7 00 00 00 16 00 0b 00 00 00 06 4e 6f   .\No 0040  20 70 72 6f 74 6f 63 6f 6c 20 73 70 65 63 69 66    protocol specif 0050  69 65 64 0a e4 bf                                 ied... Michael -- gentoo-user@lists.gentoo.org mailing list

[gentoo-user] Re: Horribly off-topic linux distro question...

a basic web-browser. Is there anything like this already available? DSL should come fairly close. Michael -- gentoo-user@lists.gentoo.org mailing list

[gentoo-user] Re: No sound in mythfrontend

On Wed, 2008-02-06 at 19:23 -0600, Michael Sullivan wrote: I have no sound in mythfrontend anymore. Here's the emerge information: camille ~ # emerge -pv mythtv These are the packages that would be merged, in order: Calculating dependencies... done! [ebuild R ] media-tv/mythtv

Re: [gentoo-user] Re: No sound in mythfrontend

On Thu, 2008-02-07 at 21:27 -0500, Jerry McBride wrote: On Thursday 07 February 2008 08:45:50 pm Michael Sullivan wrote: On Wed, 2008-02-06 at 19:23 -0600, Michael Sullivan wrote: I have no sound in mythfrontend anymore. Here's the emerge information: camille ~ # emerge -pv mythtv

[gentoo-user] Re: No sound in mythfrontend

On Thu, 2008-02-07 at 19:45 -0600, Michael Sullivan wrote: On Wed, 2008-02-06 at 19:23 -0600, Michael Sullivan wrote: I have no sound in mythfrontend anymore. Here's the emerge information: camille ~ # emerge -pv mythtv These are the packages that would be merged, in order

[gentoo-user] Can't satisfy GLSA 200801-19

camille ~ # glsa-check -t all This system is affected by the following GLSAs: 200801-19 camille ~ # glsa-check -d 200801-19 GLSA 200801-19: GOffice: Multiple vulnerabilities Synopsis:

Re: [gentoo-user] Can't satisfy GLSA 200801-19 [SOLVED]

On Tue, 2008-02-12 at 09:57 +1100, [EMAIL PROTECTED] wrote: On Mon, Feb 11, 2008 at 09:24:41AM -0600, Michael Sullivan wrote: camille ~ # glsa-check -t all This system is affected by the following GLSAs: 200801-19 camille ~ # glsa-check -d 200801-19 GLSA 200801-19

[gentoo-user] Re: load too high

that command? atop Michael -- gentoo-user@lists.gentoo.org mailing list

[gentoo-user] mozilla-firefox not finding plugins in /opt/netscape

I just updated my mozilla-firefox-bin package to the latest and I noticed that it wasn't finding the plugins installed in /opt/netscape/plugins. It was only finding the plugins in /opt/firefox/plugins. I made symlinks to the plugins in /opt/firefox, but I don't remember doing that before to get

[gentoo-user] [OT] fetchmail to procmail (or something) to arbitrary dir?

Hello, OT post here, but: I (the office, actually) have this lousy ISP that sells mailboxes limited to 50MB. Whatever, I can't change that just now. I have need to keep all mail in one place... for safekeeping, mostly. 50MB is not enough and I get a quota warning. So, knowing this situation is

Re: [gentoo-user] Portage issue

#blocked How do you get around this blocker? Thanks, Michael - -- Michael Schmarck [EMAIL PROTECTED] -- View this message in context: http://www.nabble.com/Portage-issue-tp15256634p15562413.html Sent from the gentoo-user mailing list archive at Nabble.com. -- gentoo-user@lists.gentoo.org

[gentoo-user] Re: Portage issue

Michael Schmarck michael.schmarck at habmalnefrage.de writes: These are the packages that would be merged, in reverse order: Calculating dependencies... done! [nomerge ] sys-apps/portage-2.1.4.4 [2.1.2.2] USE=-build -doc -epydoc (-selinux) LINGUAS=-pl [ebuild U ] app-shells

Re: [gentoo-user] Portage issue

Good morning! Alan McKinnon-2 wrote: On Tuesday 19 February 2008, Michael Schmarck wrote: Hello! Alan McKinnon-2 wrote: On Sunday 03 February 2008, Robert Stockdale IV wrote: [blocks B ] sys-apps/portage-2.1.4_rc1 (is blocking app-shells/bash- 3.2_p33) emerge --sync

Re: [gentoo-user] emerge --update --deep --newuse world fails to update all packages

by unmerging an offending package. Do that with care, however, or you'll do something like the OP of the recent 'emerge can not work !' thread :-) Michael -- gentoo-user@lists.gentoo.org mailing list

[gentoo-user] killing gnome light - pathetic cry for help.

I use Gnome ['gnome-light'] as my WM. For the past few months (many months) I've had the 'gnome-panel' lock up on me. Nothing is clearly causing this. Rebuilding has not seemed to help. Of course, what to rebuild? Everything? I've adopted the strategy of kill -INT and (next time) kill -HUP (and

Re: [gentoo-user] killing gnome light - pathetic cry for help.

On Tue, 26 Feb 2008 13:02:58 + Stroller [EMAIL PROTECTED] wrote: On 26 Feb 2008, at 04:18, Iain Buchanan wrote: On Mon, 2008-02-25 at 13:15 -0800, Michael Higgins wrote: (And I don't want to trash my .gnome* folders in a WAG at a fix. I have customization that will disappear

Re: [gentoo-user] How to use mplayer play file online?

-cache 8192 - Regards Michael -- gentoo-user@lists.gentoo.org mailing list

[gentoo-user] Re: Ghosting a Ext3 partition

backup). Does anyone know of a tool capable of this that runs on Linux and has FULL Linux fs support? partimage. Michael -- gentoo-user@lists.gentoo.org mailing list

[gentoo-user] Re: Is there really no way to search http://packages.gentoo.org ?!

Mike Mazur [EMAIL PROTECTED] wrote: Hi, On Tue, Mar 4, 2008 at 1:07 PM, Dale [EMAIL PROTECTED] wrote: And I get this when I go there: Looks like they might be experiencing some downtime at the moment. Try again later. They are down quite often, aren't they? :( Michael -- gentoo-user

[gentoo-user] Re: Re: Ghosting a Ext3 partition

don't see the benefit in using things like partimage or Ghost. Michael -- gentoo-user@lists.gentoo.org mailing list

[gentoo-user] CUPS: Need help setting up my parallel port printer

We got a new printer today. It's the same model as our old printer, so it should work, right? I followed the Gentoo Printing Guide up to the point where one sets up the printer in the CUPS administrative interface. It does not offer me a parallel port choice for the device. My kernel is built

Re: [gentoo-user] Re: CUPS: Need help setting up my parallel port printer [SOLVED, but new problem now]

On Fri, 2008-03-07 at 14:17 -0600, Michael Sullivan wrote: On Fri, 2008-03-07 at 12:25 -0600, Michael Sullivan wrote: We got a new printer today. It's the same model as our old printer, so it should work, right? I followed the Gentoo Printing Guide up to the point where one sets up

Re: [gentoo-user] Re: CUPS: Need help setting up my parallel port printer [SOLVED, but new problem now] [SOLVED]

On Fri, 2008-03-07 at 14:26 -0600, Michael Sullivan wrote: On Fri, 2008-03-07 at 14:17 -0600, Michael Sullivan wrote: On Fri, 2008-03-07 at 12:25 -0600, Michael Sullivan wrote: We got a new printer today. It's the same model as our old printer, so it should work, right? I followed

[gentoo-user] Re: CUPS: Need help setting up my parallel port printer [SOLVED, but new problem now]

On Fri, 2008-03-07 at 12:25 -0600, Michael Sullivan wrote: We got a new printer today. It's the same model as our old printer, so it should work, right? I followed the Gentoo Printing Guide up to the point where one sets up the printer in the CUPS administrative interface. It does

[gentoo-user] Setting LINGUAS seperately for some packages

Hello. I'd like to set LINGUAS=de for almost every package. But for the sys-apps/man-pages package, I'd like LINGUAS not to be set, so that I don't get the german man pages installed. How would I do that? Thanks, Michael -- gentoo-user@lists.gentoo.org mailing list

[gentoo-user] Re: Setting LINGUAS seperately for some packages

Dirk Heinrichs [EMAIL PROTECTED] wrote: Am Mittwoch, 12. März 2008 schrieb ext Michael Schmarck: I'd like to set LINGUAS=de for almost every package. But for the sys-apps/man-pages package, I'd like LINGUAS not to be set, so that I don't get the german man pages installed. How would I do

[gentoo-user] Re: Setting LINGUAS seperately for some packages

It seems as if this does not work - or does it? Michael -- gentoo-user@lists.gentoo.org mailing list

[gentoo-user] Re: Setting LINGUAS seperately for some packages

packages? For example, I don't think acroread has the nls USE flag. Howabout sys-apps/man-pages -linguas_de This works just fine! Thanks, Michael -- gentoo-user@lists.gentoo.org mailing list

[gentoo-user] Re: Re: Setting LINGUAS seperately for some packages

Dirk Heinrichs [EMAIL PROTECTED] wrote: Am Donnerstag, 13. März 2008 schrieb ext Michael Schmarck: Dirk Heinrichs [EMAIL PROTECTED] wrote: Am Mittwoch, 12. März 2008 schrieb ext Michael Schmarck: I'd like to set LINGUAS=de for almost every package. But for the sys-apps/man-pages package

[gentoo-user] Re: Setting LINGUAS seperately for some packages

Dirk Heinrichs [EMAIL PROTECTED] wrote: Am Donnerstag, 13. März 2008 schrieb ext Michael Schmarck: Dirk Heinrichs [EMAIL PROTECTED] wrote: Am Donnerstag, 13. März 2008 schrieb ext Michael Schmarck: Dirk Heinrichs [EMAIL PROTECTED] wrote: Am Mittwoch, 12. März 2008 schrieb ext Michael

[gentoo-user] OT - Exim question

I have an exim configuration question. I run exim-4.69. It's worked well for over a year. This morning I did a slight network topography modification, and now my wife is having trouble sending email from her computer. Her computer used to be 192.168.1.4,, but it's connected to a subrouter now

Re: [gentoo-user] OT - Exim question

On Thu, 2008-03-13 at 20:21 +0200, Sergey Kobzar wrote: Hello Michael, What does /var/log/exim/exim_mail log tell? Thursday, March 13, 2008, 7:38:55 PM, you wrote: I have an exim configuration question. I run exim-4.69. It's worked well for over a year. This morning I did

Re: Re[2]: [gentoo-user] OT - Exim question

On Thu, 2008-03-13 at 21:47 +0200, Sergey Kobzar wrote: Hi Michael, Mar 13 14:22:01 baby exim[25957]: 2008-03-13 14:22:01 unqualified recipient rejected: amy H=([192.168.0.2]) [192.168.1.100] (failed to find host name from IP address) I guess 192.168.1.100 is what my main router

Re: Re[4]: [gentoo-user] OT - Exim question

On Thu, 2008-03-13 at 22:29 +0200, Sergey Kobzar wrote: Hi Michael, Thursday, March 13, 2008, 10:15:33 PM, you wrote: It didn't work: Mar 13 15:13:31 baby exim[26470]: 2008-03-13 15:13:31 unqualified recipient rejected: amy H=([192.168.0.2]) [192.168.1.100] (failed to find host

Re: [gentoo-user] OT - Exim question

On Thu, 2008-03-13 at 14:32 -0700, kashani wrote: Michael Sullivan wrote: Do I need to add 192.168.1.100 to the hostlist in exim.conf and restart exim? Yes - this is easy solution for your problem ;) -- Sergey It didn't work: Mar 13 15:13:31 baby exim[26470]: 2008-03

[gentoo-user] OT - Finding the port NFS runs on

How can I find out what port NFS is running on so I can let it through my subrouter? -- gentoo-user@lists.gentoo.org mailing list

[gentoo-user] OT - New USB trackball; how to use?

I got a new USB trackball today. When I plug it into the computer, this shows up in dmesg: input: Logitech USB Trackball as /class/input/input6 input: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-:00:1d.0-1 How would I configure my computer so that I could use this device? --

[gentoo-user] sudo displays last login time

anyone have an idea, about why that's happening? Thanks a lot, Michael -- gentoo-user@lists.gentoo.org mailing list

[gentoo-user] Re: sudo displays last login time

Alan McKinnon [EMAIL PROTECTED] wrote: On Monday 17 March 2008, Michael Schmarck wrote: Hello. Since recently (I think since 2nd half of last week), when I use sudo on my ~x86, I get the last login time displayed: $ LC_ALL=C sudo ls -1 Last login: Mon Mar 17 07:12:40 CET 2008 from

[gentoo-user] apcupsd

to configure my apache configs so that I can access those pages again? Thanks! -- -Michael -- gentoo-user@lists.gentoo.org mailing list

<    7   8   9   10   11   12   13   14   15   16   >