Hi,
Anyone using 3590 shared between z/OS (z800) and Intel servers?
Please contact me.
Thanks
Carlos A. Bodra
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PRO
Hi,
How can I get burn in MAC ADDRESS of MP3000 Ethernet adapters?
Thanks
Carlos Bodra
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET
I did something similar in past using TCPIP Tools from Barnard Software to
read 3490 tape cartridge and write down contents directly to xSeries hard
disk. Then burn a data cd using Nero.
I tested process inverted (read cd to hard disk, then read xSeries hard disk
using Barnard Software to a 3490 t
Hi,
Anyone can explain to me what means 3390-H defined in an IBM Shark 2105. I
can´t found any reference in manual that I had access,
Thanks
Carlos Bodra
--
For IBM-MAIN subscribe / signoff / archive access i
This model is listed in Logical devices in a PC connected to IBM 2105. Our
CE shows it to us. We have 67 volumes defined as 3390-3 (2.87GB) and 6
volumes defined automatically as 3390-h (2.87GB) and one volume 3390-h
(0.66GB).
Seems to be normal operation, since we can initialized them (-h models)
Hi MP3000 Gurus,
I need some help how to migrate from an OSA-2 using Token-Ring adapter from
an IBM 9672-RB5 to a MP3000 H50 with TKR card.
Today I use XCA VTAM book to "see" OSA TKR. I was checking MP3000 manual and
found no useful information about how to configure EMIO and MPTS definitions
What is the difference between VTAM Cross-Domain and Interentreprise
license?
It´s possible to get communication between vtam at my host to another vtam
in a different host with different network id´s using Cross-Domain feature?
Or Cross-Domain is used just for Single gateway, not back-to-b
Hello,
Where can I found material about an old TPF protocol called IBM 1006?
Carlos Bodra
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN I
Hi Gurus
We are installing a z9 BC system and we are in doubt how to define IBM 2105
F20 to be accessed using Ficon channels.
We have 04 options in shark configuration:
P-T-P_FCP
P-T-P_FICON
FCAL
Undefined
Operating system can't "see" shark dasds using Ficon, just using escon
ch
Sergio,
Check security programs (Racf/TopSecret/Acf-2 etc..)
Bellow is Installation and Customization Manual
http://www-05.ibm.com/e-business/linkweb/publications/servlet/pbi.wss?CTY=US&FNC=SRX&PBL=GC26-9598-00
Have fun!!!
Carlos Bodra
IBM zSeries Certified Specialist
Sao Paulo -
http://www-01.ibm.com/common/ssi/ShowDoc.jsp?docURL=/common/ssi/rep_ca/8/897/ENUS111-078/index.html&breadCrum=DET001PT022&url=buttonpressed=DET001PT116&page=1000&paneltext1=DET001PEF011&user+type=EXT&lang=en_US&InfoType=AN&InfoSubType=CA&InfoDesc=Announcement+Letters&panelurl=index.wss%3Fbuttonpre
If I have a volume backed up using ADRDSSU 1.11 (DUMP DATASET) is
possible to restore it using ADRDSSU 1.10? (backward compatibility)
--
Carlos Bodra
São Paulo - SP Brazil
--
For IBM-MAIN subscribe / signoff / archive access in
There are some good products available in many vendors (CA, BMC, etc...)
that expand control over account.
Keep in mind that 10% of use o CPU, consume DASD access and some
gigabytes stored in you storage subsystem.
This access to DASD means too IP or SNA traffic. This envolves gateways,
routers,
Well a lot of them, but any one specific for Android and free? I can´t
find it.
Em 18/01/2012 18:48, George, William@FTB escreveu:
Duh!! LOL! Never crossed my mind to google it. Sheesh.
Thanks
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On
Beh
Just out of curiosity, what was the code name of the IBM z114. FREEWAY
was z900, z10 BC and was GRYPHON so on.
--
Carlos Bodra
São Paulo - SP Brazil
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email t
Hello,
What is this feature? It´s a non priced feature, but it´s available in
all z/OS 1.4 by applying ptf´s or is a separeted cartrigde to be use
during installation of z/OS 1.4?
If I have a z/OS 1.4 and wants to run it over z890, I will need
Compatibility feature only if z890 is part of Pa
It´s a z196 BC announcement.!
Carlos Bodra
IBM Certified Specialist System z
Sao Paulo - Brazil
Em 30/06/2011 16:33, Pommier, Rex R. escreveu:
Just got an invite to a live virtual event on July 12 regarding the "evolution of
the z hybrid". Here is the first paragraph of the an
Hello TCP/IP z/OS gurus
I need to configure a telnet access thru tcpip z/OS 1.5. Since I´m not
familiar to this,
seems that all is defined in gateway statement.
My home address will 192.168.1.230, gateway is 192.168.1.225 and network
mask is 255.255.255.240
How should I define my gateway sta
Yes z/VM can bring up with a IFL only partition.
If you choose z/VM mode you can select IFL and is mandatory to select a
CP too. This is useful when you want to run z/VSE under z/VM and some
Linux on Z machines under same z/VM.
z/VSE nor z/OS will run under a z/VM with IFL only engines.
Carlos
Goes to Operator cms machine, and give
cp sp cons clo
Thsi should close console log from IPL until now and generate a Printer
file. You can trans fer this printer file from Operator to your cms
machine and using RDRList watch it to check what happens.
Carlos Bodra
IBM Certified Specialis
log.
Now can you help me to transfer this printer file from operator to CMS
machine and how do I use RDRList to watch.
Thanks in advance.
Regards
Saurabh
On Wed, Aug 3, 2011 at 11:11 PM, Carlos Bodra - Pessoal
wrote:
Goes to Operator cms machine, and give.
cp sp cons clo
Thsi should close
19:24:31 NO FILES TRANSFERRED
19:24:31 HCPCSC042E User OPERATOR spoolid 0002 does not exist
Ready(00042); T=0.01/0.01 19:24:31
Can you please help me, how do I check spool file id.
Regards
Saurabh
On Wed, Aug 3, 2011 at 11:21 PM, Carlos Bodra - Pessoal<
cbo...@terra.com.br> wr
3590 J tapes are physically different. As 3490 cartridges can´t be used
in 3590, same for 3590 cartridges can´t be loaded in ts1120 drives...
Carlos Bodra
IBM Certified Specialist System z
Sao Paulo - Brazil
Em 18/08/2011 18:04, Clark, Kevin escreveu:
Hello all,
Let me answer the
Hello
We have an z/os 1.8 running under a lpar in a z890. Now we have a chance
to move it to a z10 BC machine, but
during IPL we are getting iea304w wait 80009064.
We already tried a lot of combinations of CSA, ECSA, SQA and ESQA values
and we continue to getting waits during
IPL. Since z/OS
Hello List Gurus.
We are in process of migrate from an ancient IBM 2105-F20 with 1TB of
legacy mainframe data to a IBM 1750-522 (DS6800). Both subsystems has
volumes defined as 3390-3 and no software features (flashcopy, pprc
etc..) used in
Shark and will neither in DS6800.
My question is, a
We are trying to IPL an z/OS 1.8 to update it to support a z10 machine.
Today it is running over an z890. During IPL
we got following abend:
18.45.46 *IEE479W MASTER SCHEDULER ABEND 052, REIPL - CODE 14
18.45.46 IEA794I SVC DUMP HAS CAPTURED:
DUMPID=001 REQUESTED BY JOB (*M
Hi
We are in process to configure some area of our 2105-800 to be used by
open systems.
We start process and when we try to building host access (option modify
host), we got in ESS Specialist console following
message:
ERROR 1199 Information server problem. An unknown server error occurred.
Hi listners.
I was checking erep output to try to discover more about MCIC (Machine
Check Interruption Code) and found following register,
but I checked 02 Erep manuals, (User´s Guide Manual and Reference
Manual), but can´t found any description how to readout these
little dump.
We are runni
Hello,
Can I run, zOSe 1.6 under a z10 machine? This is for a temporary
migration, since customer has a z890 today
and z10 announcement didn´t show zOSe as a supported system.
Any real experiences?
Thanks
--
Carlos Bodra
IBM zSeries Certified Specialist
Sao Paulo - Brazil
--
Hello,
Iff you have OSA-E 1000BaseT look for in redbook site for OSA-ICC. It
describes step by step how to configure it.
Carlos Bodra
IBM zSeries Certified Specialist
Sao Paulo - Brazil
Em 30/11/2010 15:42, SrinivasG escreveu:
Hi,
On the Z800 , we had a separate 2074 controller
Hi listners,
I´m new to z/os world, and need some clarification about following subject.
We are moving from z890 to a brand new z10 BC. Our current z/os.e
version is 1.8 (last).
Before I can ipl this version under z10 control, I need to apply z/os.e
Preventive Service Planning
mainly to get s
Hi listners,
Contuning my saga about z/os.e and z10 BC, we tried to IPL it before
install psp and get following message:
IFA200W LICENSE=z/OSe WAS SPECIFIED BUT IS NOT ALLOWED.
This message says that z/os.e runs only in z800 and z890 machines and
Lpars needs to have an specific name zose
"Last mainframe will turned off in 1996" hahahahaha
"No more than 640KB is necessary for any computer" hahahahaha
These new predictions make same effect.
Carlos Bodra
IBM zSeries Certified Specialist
Sao Paulo - Brazil
Em 11/08/2010 15:42, Mark Pace escreveu:
Bubbles!! HAHAH
Hi Rick,
You just forgot to say that 100,000 acres are under water in middle of
great lakes... but I will consider this offer when I decide to invest in
real estate!!!
Carlos Bodra
IBM zSeries Certified Specialist
Sao Paulo - Brazil
Em 12/08/2010 18:53, Scott Rowe escreveu:
W
Warning: This email was cross posted to IBM-MAIN, IBMVM and VSE-L Lists.
As z196 has a code name of *Gryphon* before announcement, other zSeries
has similar names, as *T-Rex* (z990??)
*Pterodactylus*/ (z890???)
Anyone has all family names?
z900 -
z800 -
z990 - /*T-Rex*/
z890 - /*Pterodactylu
35 matches
Mail list logo