Hi all
In the syslog,there is the following message:
IKJ139I BROADCAST DATA SET NOT USABLE, I/O SYNAD ERROR
My question :
1. Do it mean sys1.broadcast is broken?
2. How to verify sys1.broadcast DATSET?
3. How to solve this problem?
Thanks a lot!
Jason Cai
---
hi all
We want to use MPFLSTxx for the messages which we want them sound when issued
A display console can have the following feature:
An audible alarm is available on display consoles. The system sounds
this alarm when certain changes in conditions occur, such as when you
enter an invalid C
Hi all
When we shutdown our z/OS 1.11 everytime,we will issue 'Z EOD' command.
After we IPL the system again,we find that SMF dataset was switched .
P-SYS1.BDZ1.MAN1 BD1SF1600300 1 ACTIVE
S-SYS1.BDZ1.MAN2 BD1SF2600300 2 DUMP REQUIRED
S-SYS1.BDZ1.MA
> 1. How many times can PSM be run in one
> day?
Running Automatic Primary Space Management Multiple Times a Day
Issue one or both of the following PATCH commands:
PATCH .MCVT.+414 X''
> 2.Why wasn't IBMUSER.PDS2 released?
The following msg is in the log of HSM
diate does not work if you update a PDS in batch
with DISP=SHR. Use IEBGENER to copy in a member with DISP=SHR does not
release space, but simply changing the JCL to DISP=OLD causes unused space
to be released.
Ron
> -Original Message-
> From: IBM Mainframe Discussion List [mailto:IB
Dear all
In manual:
YI:Yes Immediate. Release unused space at Space Management cycle time and
also when close is issued for a data set that was open for output.
I define a MC(MCTSO) in which the Partial Release is YI .
I assign prefix ibmuser as MCTSO in ACS routing.
I allo
Dear
>DCOLLECT provides a wealth of information of the type you seek.
Could you give me any samples(JCL&REXX) which you are using for
monitoring unused and overallocated space
Thanks a lot!
Best Regards,
Jason Cai
--
F
---SNIP
Suggestion:
1. It depends on PS datasets, IMO. If you do MOD then do not release space. If
mod is not used then sure why not release space (for ps). I was at a shop that
was infamous for being tight with the $$ and we ran a release job everynight
after productio
Dear all
Is there any ways to monitor unused ,overallocated space and extents for
PS,VSAM and PO by JCL or Tools?
Thanks a lot!
Best Regards,
Jason Cai
--
For IBM-MAIN subscribe / signoff / archive access instructions,
s
>Releasing space at close can be handled in the management class by
>specifying Partial release with Yes Immediate (YI) or Conditional Immediate
>(CI) if you want to ensure that data sets have secondary allocation before
>the space is released. This does not require the space management functi
Dear all
>proper use of mgmtclas/storclas can save a whole lot of dasd and prevents the
>need to clean up garbage on a regular basis.
Our Situation :Our shop don't have DASD enough(no tapelib) and the
application programer always allocate very bigger datasets.
PS and VSAM are almost ext
Dear all
In our shop we don't have any tapelib.
Do you need to implement HSM ?
Any suggestions is greatly appreciated!
Thanks a lot!
Jason Cai
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send emai
nzalo Cengotita
发送时间: 2011-05-03 19:25:48
收件人: IBM-MAIN
抄送:
主题: Re: Add'l Volume Amount
On Tue, May 3, 2011 at 12:57 PM, ibmnew wrote:
> Dear
>
>
> >It means that if the dataset is multivolume, when it expands to another
> >volume you can decide wether you want t
olume Amount
On Tue, May 3, 2011 at 12:57 PM, ibmnew wrote:
> Dear
>
>
> >It means that if the dataset is multivolume, when it expands to another
> >volume you can decide wether you want to use the amount of the primary
> >allocation or the amount of the secondary allocatio
Dear
>It means that if the dataset is multivolume, when it expands to another
>volume you can decide wether you want to use the amount of the primary
>allocation or the amount of the secondary allocation to expand.
>Suppose you have a dataset created with SPACE=10,5 cylinders
What situation do
Hi all
' Add'l Volume Amount ' which decides if Primary or Secondary space is first
taken on additional volume extends.
My english is poor.I don't understand it. Could you give me a sample how to use
it?
Thanks a lot!
Best Regards,
Jason Cai
--
Dear Mark
I got it. Thanks a lot!
Best Regards,
Jason Cai
发件人: Mark Zelden
发送时间: 2011-04-26 21:10:01
收件人: IBM-MAIN
抄送:
主题: Re: How to start RMF Monitor III automatically after IPL the system.
>
> Coulf you send me the examples of sandbox.parmlib(SHUT&SYSNAME.) and
>sandbox.parmlib
IN
抄送:
主题: Re: Could I use Dynamic volume count(DVC) replace the volume count
parameter
W dniu 2011-04-25 09:44, ibmnew pisze:
> Hi all
>
> "Volume count" unconditionally puts that number of entries in the catalog
> for a new data
> set. Dynamic volume count only p
NAME.))
Thanks a lot!
Best Regards,
Jason Cai
发件人: Mark Zelden
发送时间: 2011-04-11 23:06:56
收件人: IBM-MAIN
抄送:
主题: Re: How to start RMF Monitor III automatically after IPL the system.
On Mon, 11 Apr 2011 11:53:27 +0800, ibmnew wrote:
> Thanks for your help.
You're welcome
>
Hi all
"Volume count" unconditionally puts that number of entries in the catalog for
a new data
set. Dynamic volume count only puts in the volumes that actually get
extended to and have data on them. This cuts down on the space taken up
in the catalog.
Q1 Could I use Dynamic volume count(D
Dear
>>You have the answer above!
>>This is not related to EF, it is related to multi-volume allocation. In
>>fact you can release unused space of multi-vol PS, but with serious
>>limitations, and NOT by using ISPF.
Could you send me a sample JCL to release unused space of multi-vol PS?
Th
ltivolume cmd .
Q:How to release unused space of PS EF
Thanks a lot!
Best Regards,
Jason Cai
发件人: R.S.
发送时间: 2011-04-21 15:24:14
收件人: IBM-MAIN
抄送:
主题: Re: Is DSNTYPE=EXT parameter only used for VSAM
W dniu 2011-04-21 05:49, ibmnew pisze:
> Dear all
>
>The summary is very v
Dear all
The application programmers in our shop always allocate many big
datesets(PS,PDS,VSAM),but they only use <10% space oF the datasets.
I want to release the spaces that aren't used by SMS .
Could you tell me how to do it?
I wonder what situations we need to use Space Const
Dear all
The summary is very very clear. Thanks you all for your help!
I want to ask you other questions:
>> when considering DFSMS compression , one should take into account that
>>it comes with a CPU price tag, so I would not compress everything
>>indiscriminately (unless CPU is cheaper
Dear
DSNTYPE=LARGE: The data sets are large format sequential data sets
DSNTYPE=EXT:no track limitation
Q1:What's the differences between DSNTYPE=EXT and DSNTYPE=LARGE for large PS?
Q2:Could DSNTYPE=EXT replace DSNTYPE=LARGE ?
Q3:Ours shop is z/OS 1.11, Every PS should now benef
Dear all
JNUM and JQES are full in our shop
*$HASP050 JES2 RESOURCE SHORTAGE OF JNUM - 100% UTILIZATION REACHED
*$HASP050 JES2 RESOURCE SHORTAGE OF JQES - 100% UTILIZATION REACHED
My questions:
1 What made JNUM and JQES full?
2.JOENUM=161314,JOBNUM=65534 AND CKPTSPACE BERTNUM=9000 in the
>>It's not. non-EF PS can be multi-volume.
Yes.
What's differences between non-EF PS with EF PS?
Below is the differences?
1.EF PS can be compressed
2. no track limitation for EF PS ( Is EXTENDED ADDRESSABILITY parameter only
used for VSAM ?)
Thanks a lot!
Best Regards,
Jason Cai
-
Dear all
Using an EF data set enables you to use VSAM functions such as multivolume
allocation, compression, or striping.
Q1. Is DSNTYPE=EXT parameter only used for VSAM ? Could it be used for PS,PDS
and etc?
Q2. PS and PDS could be allocated across multivolume ?
Any ideas is greatly appr
modifying IEEACTRT to include JOBNAME?
Thanks a lot!
Begards,
Jason Cai
发件人: ibmnew
发送时间: 2011-04-13 14:08:58
收件人: IBM-MAIN
抄送:
主题: Jobname colums was lost in the sdsf joblog on ZOS1.11.
Dear all
One system has been migrated from z/OS 1.9 to z/OS 1.11
in ZOS 1.9 sdsf joblog,the
Dear all
One system has been migrated from z/OS 1.9 to z/OS 1.11
in ZOS 1.9 sdsf joblog,the information of a job will be like:
JOB61899 -JOBNAME STEPNAME PROCSTEPRC EXCP CONNTCBSRB
JOB61899 -NBJRDBH DEL531 00246442 551177.00
JOB
Dear all
Thanks all for your help!
I could understand more about your relpy.
Best Regards,
Jason Cai
发件人: Darth Keller
发送时间: 2011-04-12 03:38:27
收件人: IBM-MAIN
抄送:
主题: Re: DATACLASS
Q2 What's wrong of the ACS routing below:
SELECT
WHEN ((&DSN = &ABSPPS) AND
(&DSO
SN, DSORG = &DSORG
IF &DSN = &ABSPPS THEN
DO
WRITE DSN MATCHES
IF &DSORG NE &DSORGS THEN
DO
WRITE DSORG MATCHES
SET &DATACLAS = 'DCPS'
END
WRITE DATACLASS = &DATACLAS
END
IF &DATACLAS EQ '&
发送时间: 2011-04-08 22:10:10
收件人: IBM-MAIN
抄送:
主题: Re: How to start RMF Monitor III automatically after IPL the system.
On Fri, 8 Apr 2011 16:46:11 +0800, ibmnew wrote:
> do I prepare a proc and put COM='S RMFIII' statement in the COMMND00
>after COM='S RMF.RMF,,,
DELAY 10
F RMF,START II
Thanks a lot!
Jason Cai
发件人: ibmnew
发送时间: 2011-04-08 14:30:22
收件人: IBM-MAIN
抄送:
主题: Re: How to start RMF Monitor III automatically after IPL the system.
Dear Mark
Do we need to submit the following JCl to start RMF Monitor III
venerable OTTO from
file 332 of the CBT tape quite successfully. File 623 might be more functional,
but I can't personally vouch for that one.
Ant.
Northern Territory Govt., Australia
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Thanks a lot!
Best Regards,
Jason Cai
发件人: Mark Zelden
发送时间: 2011-04-08 00:42:42
收件人: IBM-MAIN
抄送:
主题: Re: How to start RMF Monitor III automatically after IPL the system.
On Thu, 7 Apr 2011 10:24:23 +0800, ibmnew wrote:
>Hi all
>
> We don't have SA.
>
> How to s
ne from DSORG EQ PS to DSORG
NE (PO, VS, IS, DA, etc)
Barry Schwarz
OS/390 System Programmer
M/S 80-JE
Phone: 253-657-5262
Fax: 253-657-8574
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
ibmnew
Sent: Wednesday, April 06, 2011 8:11 PM
To:
Hi
Yes. I am trying to create a DATACLAS and associated rules that will
provide a set of default
characteristics for a DSORG=PS file.
If DSORG=PS must be used in the JCL, We need change a lot of JCL.
Is there other method to do it without using DSORG=PS in the JCL?
Thanks a lot
Hi
Thanks your answers.
I am sorry that I just came back by holiday
Today I submit the following JCL:
//ALOCHSKP EXEC PGM=IEFBR14
//MESSAGE DD DSN=ABSP.CEB.TEST9,DISP=(NEW,CATLG,DELETE),
//UNIT=3390,SPACE=(4096,(10,10)),
//
Hi all
We don't have SA.
How to start RMF Monitor III automatically after IPL the system?
Any suggestions is apprecited!
Thanks a lot!
Jason Cai
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send emai
Hi all
We want to assign a DC (DCPS) to HLQ(ABSP.CEB.**) and DSORG=PS
Below is the ACS rounting:
PROC DATACLAS
FILTLIST ABSPPS INCLUDE(ABSP.CEB.**)
Hi all
We defined a Scheduling Environments (DEVLD) in the WLM below.
Scheduling Environment Name. . DEVLD
Resource Name State Resource Description
- -
DBZ3
Hi
I found the reason:
SDSF checks ISFAUTH *before* it looks at JESSPOOL.
Thanks a lot!
Best Regards,
Jason Cai
ibmnew pisze:
> Hi all
>
> My shop is z/OS 1.11(RACF).
>
> I want to know how to only purge and cancel own jobs from the SDSF pannels.
>
> SDSF,
Hi all
My shop is z/OS 1.11(RACF).
I want to know how to only purge and cancel own jobs from the SDSF pannels.
SDSF,OPERCMDS and JESSPPOL classes are involved.
Could you help me?
Any suggestion would be helpful!
Best Regards,
Jason Cai
-
Hi
We will activate operlog. Thanks a lot!
Best Regards,
Jason Cai
On Thu, 10 Mar 2011 16:58:03 +0800, ibmnew wrote:
>Hi all
>
> Our shop is a single image on z/OS 1.11
>
> Do we need to issue 'VARY OPERLOG,HARDCPY' command?
>
> Do the single image n
Hi all
Our shop is a single image on z/OS 1.11
Do we need to issue 'VARY OPERLOG,HARDCPY' command?
Do the single image need OPERLOG?
Any suggestion would be helpful!
Best Regards,
Jason Cai
--
For IBM-MAIN subscribe
Joel C
I got it.Thanks you very very much!
Best Regards,
Cai Jin Song
> Hi all
>
> We defined a VSAM file and a GDG base using a user id DBJMP05.
> The prefix of DBJMP05 is managed by SMS
> SMS routing
> SC :
> FILTLIST TSOUSERS INCLUDE(DBJMP*)
>
> WHEN&HLQ =&TSOUSERS
>
Lizette
There are only RACF profiles DBJMP05.** for DBJMP05.BDZ3 and DBJMP05.FAS.
Thanks a lot!
Jason Cai
> Our shop is RACF.
> It is single level alias
> Our shop is z/OS 1.11. the image is a single image.
>
> DBJMP05.BDZ3.MAN1 catalog to the same catalog as the GDG.
> Thanks a lot!
> Jas
Our shop is z/OS 1.11. the image is a single image.
Thanks a lot!
Hi all
Our shop is RACF.
It is single level alias
DBJMP05.BDZ3.MAN1 catalog to the same catalog as the GDG.
Thanks a lot!
Jason Cai
> DEFINE GDG (NAME(DBJMP05.FAS.SE.FMLX.HIST) -
>LIMIT(03)
Hi all
Our shop is RACF.
It is single level alias
DBJMP05.BDZ3.MAN1 catalog to the same catalog as the GDG.
Thanks a lot!
Jason Cai
> DEFINE GDG (NAME(DBJMP05.FAS.SE.FMLX.HIST) -
>LIMIT(03) -
>NOEMPTY
Hi all
We defined a VSAM file and a GDG base using a user id DBJMP05.
The prefix of DBJMP05 is managed by SMS
SMS routing
SC :
FILTLIST TSOUSERS INCLUDE(DBJMP*)
WHEN &HLQ = &TSOUSERS
SET &STORCLAS = 'SCSTAND'
SG:
FILTLIST TSOUSERS INCLUDE
Dear Bill
You are right.
I have other two questions:
1.Could you tell me why the records associated with the SYSPLEX couple data set
weren't in the incoming CDS ? Because of monplex configuration?
2. How to report on the contents of the BPXMCDS data?
Thanks a lot!
Best Regards,
Jason
.
Consider to run IXCMIAPU utility program with DATA TYPE(BPXMCDS) REPORT(YES)
to find out the capacity from current primary CDS. Or you may need to
rebuild the alternate.
Lizette
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf
Of ibmnew
Sent:
Hi all
Our shop is a monoplex configuration.We want to use a new OMVS couple dataset.
1.We issue '-D XCF,COUPLE,TYPE=BPXMCDS' command.The following messages were
shown:
IXC358I 16.07.47 DISPLAY XCF 850
BPXMCDS COUPLE DATA SETS
Hi all
Our shop is a monoplex configuration
When we use BPXISYZR member to create the sysplex root ZFS data set, I found
that shareoptions was 2.
Could you tell me it is correct or not? Could I use SHAREOPTIONS(3) as the
following?
-
Staller
Thank you very much!
ARM Couple datasesr and OMVS Couple dataset?
1) Yes you can define these files and policies. A CF is not needed for
this.
2) an OMVS couple dataset would only be needed if there are multiple
images sharing HFS/ZFS files, See the "Setting up a SYSPLEX" books (I
be
Hi all
There isn't any Couple facility in our shop.it was monoplex configuration
Could we define ARM Couple datasesr and OMVS Couple dataset in our shop?
If ARM couple dataset could be defined,we could define some arm police to
restart some Adderspaces when they abend.If it cann't be defin
Tue, 9 Nov 2010 19:51:10 +0800, ibmnew wrote:
>When we install z/OS 1.11 using Servpac,we want to rename
SSA.PLEXBDZ3.XCF01 to PLEXBDZ3.XCF01 as below.
>
>IEC614I RENAME FAILED was occurred.Please see the following message.
>
>
>IEC614I RENAME FAILED - RC 008, DIAGNOSTIC INF
Hi all
When we install z/OS 1.11 using Servpac,we want to rename SSA.PLEXBDZ3.XCF01 to
PLEXBDZ3.XCF01 as below.
IEC614I RENAME FAILED was occurred.Please see the following message.
IEC614I RENAME FAILED - RC 008, DIAGNOSTIC INFORMATION IS (04100C04), 258
258 ALTCAT,BD3CD2,SSA
Hi all
We are planning to install new z10s into one data center that do not
currently have mainframes.
I will use the Customized offerings Driver to install the driver system.
I am coding the IOCDS on the HMC. I hope that our IOCDS match the IODF shipped
by the Customized offerings Driver
Hi all
We finished z/OS 1.11(A system) installation using Serverpac on one system(A).
All of IVPs are ok. We checked /Service/bin directory and see the UID/GID of the
filesre stored is 0/1.
This system(A) can be IPLed.Everything seem to be normal.
Then we migrated an other z/OS(B) from 1.
Dear
Could you share your list of datasets that got a D37 with us? Thanks a lot!
Best Regards,
Jason Cai
主题: Re: Changing data set space values.
Jason,
I typically keep a list of datasets that got a D37 from the last time I
installed a Serverpac and did an Apply.
The next server pa
Hi all
Normal One parallel sysplex use its own CFs.
I wonder whether two parallel sysplex could share one CF Lpar
Thanks a lot!
Best Regards,
Jason Cai
--
For IBM-MAIN subscribe / signoff / archive access instructions,
se
Hi all
We are installing z/OS 1.11 using Serverpac.
Normal we issue 'CH S 100 * 100' command to increase the all datasets shipped
on the RES volume.
Could you tell us how to make sure which dataset on the RES volume really need
to increase?
Normal what do you do for it? Thanks a lot!
Bes
Dear all
Our shop is a parallel sysplex.We just migrated our z/OS from z/OS 1.9 to 1.11.
We didn't migrate any existing data from HFS to zFS.
Our application team want to use zFS new function,but we don't want to migrate
any existing data from HFS to zFS.
We don't have any experience of zFS.
Dear all
I checked our system.Please see informations below
On the bad system
D PROG,EXIT,EX=SYS.IEFACTRT,DIAG
RESPONSE=BT06
CSV464I 08.54.50 PROG,EXIT DISPLAY 176
EXIT SYS.IEFACTRT
Dear
The exit IEFACTRT( SYSSLS0.IEFACTRT E) is enable. Do we need recompile the
exit?
Thanks a lot!
Best Regards,
Jason Cai
On Mon, 28 Jun 2010 16:50:42 +0800 ibmnew wrote:
:> Our shop is z/OS 1.9.
:> On the one z/OS 1.9,there isn't RC of step in the joblog.Please see it
Dear all
Our shop is z/OS 1.9.
On the one z/OS 1.9,there isn't RC of step in the joblog.Please see it below:
09.11.48 JOB03386 THURSDAY, 10 JUN 2010
09.11.48 JOB03386 IRR010I USERID BJSP41 IS ASSIGNED TO THIS JOB.
09.12.20 JOB03386 IC
Dear all
We are migrating z/OS from 1.9 to 1.11
I found there was a usermod(FRED001) on the z/OS 1.9 .Below is the information
for the usermod
FRED001 M.C.S. ENTRIES = ++USERMOD (FRED001) REWORK(2009183) . /* SPEFIFY
USERMOD NAME */
++VER (Z038) FMID(HDZ1190) /* insert correct FMID */
PRE (U
Dear all
Yes you are right.
It will be reset back to 644 during the next IPL becuase there is
''chmod 644 /etc/utmpx' statement in the /etc/rc.
Who could tell us another solution for it?
We want to change owner of /bin/fomtlout from OEDFLT(UID=99) to
BPXOINIT(UID=0).
Dear all
We verified the following files.We found that the setuid bit for all of them
was on.
ls -alE /bin/fomtlinc
ls -alE /bin/fomtlout
ls -alE /bin/crontab
-rwsr-xr-x --s- 2
Dear
Our shop is z/OS 1.11 now .
After z/OS was migrated from 1.9 to 1.11,we issued 'TSO OMVS'
command.
We got the following messages:
FSUM2378 The start of the session was not recorded. The slot
(in /etc/utmpx) for this terminal could not be updated, or a
Dear all
As we know,if we want to create a new system from a existing system,we usually
clone the existing system.
When we clone the existing system,we could use a new name convention for the
new system.for example :
a new syslex name,a new system,a new MCAT name. but it take few days to
Paul
Could you sent it to me.My email is ibm...@163.com Thanks a lot!
Best Regards,
Jason Cai
发件人: Paul Gilmartin
发送时间: 2010-05-28 20:52:33
收件人: IBM-MAIN
抄送:
主题: Re: Why the ISFROWS1 is diffenent between on batch with under ISPF/PDF
On Fri, 28 May 2010 07:01:46 -0500, Staller, All
Dear all
I use ISRDDN to create a Clist
Below is my JCL
//SYSTEM EXEC PGM=IKJEFT01,DYNAMNBR=30,REGION=4096K
//SYSEXEC DD DSN=IBMSE03.REXX,DISP=SHR
//SYSTSPRT DD DSN=IBMSE03.REPORT(TEMP),DISP=SHR
//ISPPROF DD DSN=IBMSE03.ISPF.ISPPROF,DISP=SHR
//ISPPLIB DD DISP=SHR,DSN=DSN910.SDSNPFPE
//
Paul
Our shop is z/OS 1.9 with parallel sysplex,Could you tell me how to find the
reason ?
Thanks a lot!
Best Regards,
Jason Cai
ADDRESS SDSF does not require ISPF.
The old SDSF access routines do need ISPF, but the interface that came
with 1.9 does not.
Regards
Paul
-Original Me
I have the following questions :
1.Running my REXX under ISPF/PDF
under ispf p.6
EX TEST.BJSP55.ZTB9TMP(SCHDA04)
TEST.BJSP55.ZTB9TMP(SCHDA04)
/* REXX */
RC=ISFCALLS(ON)
ISFOWNER ="CCBSP02"
Dear all
You are right.It is security. I checked the SYSLOG and found the messages.
Thanks a lot!
Best Regards,
Jason Cai
发件人: Mary Anne Matyaz
发送时间: 2010-05-18 19:08:56
收件人: IBM-MAIN
抄送:
主题: Re: What is the difference between starting a cataloged procedure and
submitting a
Hi all
I submit the following JCL
//LOGWDSJ JOB CLASS=A
//STEP1 EXEC PGM=IEBGENER
//SYSUT1 DD DUMMY,DCB=(LRECL=133,RECFM=FB)
//SYSUT2 DD DISP=(,CATLG,DELETE),RETPD=366,VOL=(,,,1),
//
Hi all
We want to replace out sysplex time with STP. We purchased two CFs(Z10) and
installed two couple links with
ICB-4 between the CFs.
Could you help us to define the couple links using HCD for it. Thanks a lot!
Best Regards,
Jason Cai
---
Hi all
Our shop is Z/OS 1.8. We want to implement HSMplex(4 members).we will also
implement DR in the future.
We are not sure whethere we need RLS for accessing the control data sets.
Could you tell us the advantage and disadvantage of RLS ? Is there any
limition for the HSM CDS managed v
81 matches
Mail list logo