We have a 3 system plex, with two of those systems, DEV and PROD, in a
JES2 MAS. We had an incident recently where a development job got into
a loop and used up all spool. This in turn, caused our PROD system to
come to, basically, a screeching halt.
Management wants to investigate removing
If you are interested in not splitting, besides the mention of setting a line
limit, look at the emergency subsystem available in jes2 2.4. And of course
looking at potential automation to detect/ prevent issue may have value.
Although a job in a loop can be a challenge to handle.
-
te Count and
specify option 2.
When the job exceeds the defined limit (more or less), the job will
abend
w/S722.
HTH,
-Original Message-
From: IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU On
Behalf
Of Michael Babcock
Sent: Thursday, December 8, 2022 1:16 PM
To: IBM-MAIN@LISTSER
or less), the job will abend
w/S722.
HTH,
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Michael Babcock
Sent: Thursday, December 8, 2022 1:16 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Split JES2 MAS
[CAUTION: This Email is from outside the Organization. Unless you
I think maybe all of us have seen something like this over the years, we
control this via OPS (automation) two fold
1) pause - quiesce the workload and notify operations / systems when the
threshold reaches 80%
2) (we don't have a need) but just in case, automation will add a spool
volume we
Yes, a JES2 cold start with newly defined/allocated spool and checkpoint
datasets will be needed. Have you looked into setting default estimates in
JES2PARM, bytes, lines, pages, with OPT=1 to cancel jobs that exceed your
limits?
Mark Jacobs
Sent from ProtonMail, Swiss-based encrypted email.
2.
>
> When the job exceeds the defined limit (more or less), the job will abend
> w/S722.
>
> HTH,
>
> -Original Message-
> From: IBM Mainframe Discussion List On Behalf
> Of Michael Babcock
> Sent: Thursday, December 8, 2022 1:16 PM
> To: IBM-MAIN@LISTSERV.
appropriate Count and
specify option 2.
When the job exceeds the defined limit (more or less), the job will abend
w/S722.
HTH,
-Original Message-
From: IBM Mainframe Discussion List On Behalf
Of Michael Babcock
Sent: Thursday, December 8, 2022 1:16 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Spl
t (more or less), the job will
abend
w/S722.
HTH,
-Original Message-
From: IBM Mainframe Discussion List On
Behalf
Of Michael Babcock
Sent: Thursday, December 8, 2022 1:16 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Split JES2 MAS
[CAUTION: This Email is from outside the Organization. Unl
Food for thought - separate MAS for each environment, but same
SYSPLEX. Though better to have each environment in separate SYSPLEX
and MAS. (That also allows better separation for implementing
changes to each environment.
Michael)
At 01:16 PM 12/8/2022, Michael Babcock wrote:
Content-Trans
in the JES2 manual; Set an appropriate Count and
> > > > specify option 2.
> > > >
> > > > When the job exceeds the defined limit (more or less), the job will
> > > > abend
> > > > w/S722.
> > > >
> > > > HTH,
The easiest option would be to create a new environment and volume(s)
for test and development and IPL to the new volume(s), leaving the
production alone, and disable some volumes if you need to reclaim
space.
On Thu, Dec 8, 2022 at 1:16 PM Michael Babcock wrote:
>
> We have a 3 system plex, with
PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: [EXTERNAL] Split JES2 MAS
We have a 3 system plex, with two of those systems, DEV and PROD, in a
JES2 MAS. We had an incident recently where a development job got into a loop
and used up all spool. This in turn, caused our PROD system to come to
13 matches
Mail list logo