new funktion in perftk 520 ?

hello VM'er, currently I am testing zVM 5.2.0 and Performance Toolkit (PERFTK). When I connect via webbrowser I see on the SYSMENU the following headline: 'Systems Accessible via APPC/VM or TCP/IP' In our older PERFTK 4.4.0 the text was 'Systems Accessible via APPC/VM' Does this meen, that I

Re: zVM 5.2 ESAMAP and MXG

This has now been resolved. MXG Update 24.035, available from Merrill, addresses the problems. Many thanks to all who contributed to identifying and resolving this problem. Regards Jeff

Question On Setting Up A Special Privilege Class

Hello Everyone, We have been receiving many requests lately to turn up or turn down a share for a specific userid during our clients batch cycles. They are going through some growing pains(very good thing) and are still trying to figure out the best mix for their nightly, weekend and monthly

Re: Question On Setting Up A Special Privilege Class

If you set up a new privilege class, I cant think of any way you could restrict the target of the command to specific userids. It sounds more like you want to create a service virtual machine that can receive requests for share changes, validate them, and perform them on behalf

Dennis Schaffer/MutualOMA is out of the office.

I will be out of the office starting 04/05/2006 and will not return until 04/11/2006. I will check email periodically, mainly next week, while I'm gone. Please contact Terry Lessmann or Steve Seiker for z/VM issues. Please contact Glen Burgardt or Steve Seiker for z/OS issues.

Re: Sample RSCS EXIT 27

Hello, thank you to all. Problem solved - someone already sent me a fine sample. With best regards Eddir Sontowski Landesamt für Besoldung und Versorgung NRW mailto: [EMAIL PROTECTED] Phone: +49 211 6023 - 1676 Fax:+49 211 6023 - 1233 -Ursprüngliche Nachricht- Von:

Re: Questions about running z/OS under z/VM

We run 3 LPARs on our z890 w/16GB of storage. The first LPAR is a z/VM LPAR w/7GB of storage. It runs 8 z/OS systems w/storage sizes ranging from 384MB to 512MB. In the second LPAR, we run a single z/OS system w/4GB of storage. The third LPAR is our Linux LPAR with z/VM and a TBD number of

Re: Questions about running z/OS under z/VM

I take it that the firstz/VM LPAR has enough storage so that z/VM paging iskept to a minumum. Daniel Allen Sr. System Programmer Serena Software, Inc. 13713 Pinto Lane Lodi, CA 95240 800-699-6850 ext. 11241 From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Judson

Re: Questions about running z/OS under z/VM

z/VM is not paging at all. All of the z/OS systems in that partition are test/dev systems. Performance is still good on these systems, however. Our only production z/OS system is in its own LPAR. - Judson West Teradata, a division of NCR Corporation

Re: DDR

Laren--As long as the tape drive is defined in the IOCDS you loaded, it will be attached. You attach something under VM by connecting the device to the virtual machine you are on. You do the attach by sending a command to the micro-code of your virtual machine, that being CP. If you're on the

Re: DDR

Loren, Any drive at an address that is included in the IOCP can be used. Since you are loading from the HMC, all you need do is to put its address in as the load address. Once running, DDR can use any available address. It is not restricted to the symbolic addresses defined by CMS.

CAVMEN Meeting on Thursday, April 27, 2006

The second quarter meeting of the Chicago Area VM (and Linux) Enthusiasts will be held on Thursday, April 27, 2006. The preliminary agenda is included below. Plans for the 2:00PM presentation are still pending. Another e-mail will be sent next week with the final agenda. --