I've only worked with other people who knew something about switches,
but
from what I saw done, every port on every switch is configurable as to
what IP address and subnet it is in. If there are other switches with
unused ports, they can be reworked to be what you need them to be. If
your
On Tuesday, 10/09/2007 at 08:58 EDT, Hans Rempel [EMAIL PROTECTED]
wrote:
Thanks Mark. I think that is what a VLAN is all about. Using a switch
(real
or virtual) to setup different ports for different subnet addresses. I
just
wanted to be sure that I'm not missing something before talking to
Hi all. We just installed a second OSA card on a z/800 running z/VM 5.2. I
would now like to set up my VSWITCH to use two ports, one on each card, for
fail over support. I have asked the network folks to give me access to a
second switch but they only have one switch for my subnet. Can I use a
On Tue, Oct 9, 2007 at 6:10 AM, in message
[EMAIL PROTECTED], Hans Rempel [EMAIL PROTECTED]
wrote:
Hi all. We just installed a second OSA card on a z/800 running z/VM 5.2. I
would now like to set up my VSWITCH to use two ports, one on each card, for
fail over support. I have asked the
I used my Web email account to send the last email with a attachment but I'm
not sure if the attachment was sent. I will try again tonight.
Hans
-- Original Message --
From: Hans Rempel [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
Date: Tue, 9 Oct 2007
On Tue, Oct 9, 2007 at 2:35 PM, in message
[EMAIL PROTECTED], Hans Rempel
[EMAIL PROTECTED] wrote:
I have attached a diagram to help express my network. The VSWITCH and all
guests are on the same subnet and will stay on the same subnet. I'm hoping
that another physical switch but
configuration more
accurately.
Hans
-Original Message-
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On
Behalf Of Mark Post
Sent: October 9, 2007 6:27 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: VSWITCH fail over support
On Tue, Oct 9, 2007 at 2:35 PM, in message