I am trying to use Alan Altmark's program QCPACF to see if CPACF is
installed on our z890.
I get a program check using the STFLE instructions.
My virtual machine is defined as ESA and again as XC and the same
failure occurred.
Is there something else I need to do to the STFLE to work?
A z9 or better for STFLE, I believe. Not sure what bit in the STFLE corresponds
to the CPACF feature but if it's within the first 32 then it's covered by STFL.
On 7/6/10 11:38 AM, Hughes, Jim jim.hug...@doit.nh.gov wrote:
I am trying to use Alan Altmark's program QCPACF to see if CPACF is
Jim, I think you are too back level on your z890 processor for the STFLE
instruction to work.
I happen to have a program I would be glad to send you (or anybody else,
for that matter) that will report back on the capabilities of the CPACF
function without using the STFLE instruction.
Have a
:05 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: Z//VM 5.4, z890, and CPACF
Jim, I think you are too back level on your z890 processor for the STFLE
instruction to work.
I happen to have a program I would be glad to send you (or anybody else,
for that matter) that will report back
System [mailto:ib...@listserv.uark.edu] On Behalf
Of Dave Jones
Sent: Tuesday, July 06, 2010 12:05 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: Z//VM 5.4, z890, and CPACF
Jim, I think you are too back level on your z890 processor for the STFLE
instruction to work.
I happen to have a program I
] On Behalf
Of Imler, Steven J
Sent: Tuesday, July 06, 2010 12:33 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: Z//VM 5.4, z890, and CPACF
Dave,
If you have a CA VMRMAINT machine (any of the CA VM:Manager products installed)
we supply a utility to give you that information. It's VMRHES ...
snip
: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf
Of Hughes, Jim
Sent: Tuesday, July 06, 2010 12:39 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: Z//VM 5.4, z890, and CPACF
Yo! Tell me where it is. I have VM:Secure running. I don't see a VMRHES
MODULE on any of my VMRMAINT
On Tuesday, 07/06/2010 at 11:47 EDT, Hughes, Jim
jim.hug...@doit.nh.gov wrote:
I am trying to use Alan Altmark?s program QCPACF to see if CPACF is
installed
on our z890.
I get a program check using the STFLE instructions.
The STFLE instruction was added as part of the
