On Monday, 03/12/2007 at 11:02 CST, RPN01 [EMAIL PROTECTED] wrote:
Point of order...
If you're going to dump and restore the spool, and IPL Clean, is there
really a need to drain the volume? What purpose in the sequence would it
serve?
You're right, you should drain *all* the spool volumes
: [IBMVM] detach spool pack from system
I have a second level spool pack attached on the first level system,
it's defined as CP owned pack in the system config on first level.
Is there way to detach it dynamically from system without updating config
or ipl ?
q a557
DASD A557 CP OWNED 52LSPL
@LISTSERV.UARK.EDU
cc
Subject
Re: detach spool pack from system
Hi Ann: You can try draining it with the CP DRAIN. DASD command, but first
check if there are any CP areas on the pack, do a QUERY ALLOC. IF there
are any in use areas, you will have to get it off the volume. If it's
being used for spool
Subject: Re: [IBMVM] detach spool pack from system
Hi, David,
There is no in use area except spool area:
DASD A557 52LSPL 3390 CKD-ECKD (UNITS IN CYLINDERS)
TDISK TOTAL=000 INUSE=000 AVAIL=000
PAGE TOTAL=000 INUSE=000 AVAIL=000
SPOOL
On Monday, 03/12/2007 at 10:33 AST, [EMAIL PROTECTED] wrote:
I have a second level spool pack attached on the first level system,
it's defined as CP owned pack in the system config on first level.
Is there way to detach it dynamically from system without updating
config or
ipl ?
to hurt.
-Original Message-
From: The IBM z/VM Operating System on behalf of Alan Altmark
Sent: Mon 3/12/2007 11:25 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: [IBMVM] detach spool pack from system
On Monday, 03/12/2007 at 10:33 AST, [EMAIL PROTECTED] wrote:
I have a second level spool
Indeed, no Drain required then. Be sure your SYSTEM CONFIG is without that
spool volume when you IPL
--
Kris Buelens,
IBM Belgium, VM customer support
Point of order...
If you're going to dump and restore the spool, and IPL Clean, is there
really a need to drain the volume? What purpose in the sequence would it
serve?
True, but if you use the SPFPACK tool as Alan mentioned, you can dump
and restore only the files that have information on that
.
Thanks,
Ann
David Kreuter [EMAIL PROTECTED]
Sent by: The IBM z/VM Operating System IBMVM@LISTSERV.UARK.EDU
03/12/2007 11:44 AM
Please respond to
The IBM z/VM Operating System IBMVM@LISTSERV.UARK.EDU
To
IBMVM@LISTSERV.UARK.EDU
cc
Subject
Re: detach spool pack from system
I agree
