On 09/01/2005, at 11:04 AM, Paul Curtis wrote:
Julian Tyler wrote:
I've look on the web and search threw the mailing list but haven't
found a fix, i get this slight black boarder around all things i
capture, about 1-4 pixels, i wondering how i can crop the source
before the encoder, can the pvr
Hi, I can't get X working on my PVR-350 (rev 990) TV-OUT and would really
appreciate some help.
I am using Mandrake 10.1 with a 2.6.8.1-12 kernel on a dual-Xeon system. I am
running ivtv-0.3.2a with the tuner patch and the latest driver from the
Hauppauge web site.
What works: I can watch usi
I've attached the relevent dmesg output after loading ivtv from 0.3.2b
running on FC3 (kernel 2.6.9-1.724). No problems using ivtv 0.3.2a,
however (which works rather well so far).
Let me know if higher debugging levels/etc. would help.
Regards,
Tim
--
Morals? I eat communism and $h!t America
Hello,
I recently received a PVR-500 as a present.
I am interested in helping make the ivtv drivers work with NTSC per
Axel's request.
Can anyone tell me / help me with what I need to do?
I already installed the ivtv-0.3.x-Amity2 drivers from Atrpms onto a
clean FC3 box.
What should my modprobe
Julian Tyler wrote:
I've look on the web and search threw the mailing list but haven't found
a fix, i get this slight black boarder around all things i capture,
about 1-4 pixels, i wondering how i can crop the source before the
encoder, can the pvr 350 do this in any way?
As far as I know, the e
Post your xorg.conf and the xorg log file & I'll take a look.
JOhn
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:ivtv-devel-
> [EMAIL PROTECTED] On Behalf Of TheNop
> Sent: 08 January 2005 22:41
> To: ivtv-devel@lists.sourceforge.net
> Subject: Re: [ivtv-devel] [XDRIVER] v0.8 pre
I had some down time today, so I thought I would look at msp3400
distributed in the kernel source and see what needed to be changed in it
to get it to work with the ivtv driver. I have been trying to do this for
some time, but never got around to it.
Well, I guess good things come to those who
I've look on the web and search threw the mailing list but haven't
found a fix, i get this slight black boarder around all things i
capture, about 1-4 pixels, i wondering how i can crop the source before
the encoder, can the pvr 350 do this in any way?
thanks
Julian.
smime.p7s
Description: S/M
Hi,
I want to try the v0.8 Xorg driver, but I get Xorg not configurated.
I followed the description below.
http://www.schaefer.dhcp.biz/pvr350tvout.htm
This is a snap from the Xorg.1.log
(II) Loading /usr/X11R6/lib/modules/drivers/ivtvdev_drv.o
(II) Module ivtv: vendor="The XFree86 Project"
Paul Curtis wrote:
> Andreas Gungl wrote:
> > IMO the card initialization is flaky, but I'm not familiar with the
> > implementation details. All I wanted to do is to confirm Gijs
> > observations and perhaps to get in contact with other people running
> > Suse 9.2. That might be a base to have com
Hey, if I have to reboot anyway, it doesn't matter using Linux or Win* in
the first place. ;-)
I wonder how you used to "tune to good station". I've selected some channels
which I know to contain a station in normal operation, but ivtvctl -I never
presented anything than
# ivtvctl -I
check SAA
Hi Nick,
Didn't have time to test your trick (I'm having trouble with my
PVR-350 tuner type 38 too: unstable picture).
I know from experience in the past that rmmod of all related modules
followed by 'modprobe ivtv' while tuned to a station does not help.
So, if your trick works, the soft reboot se
Well I'm back to square 1... I borrowed a 350 from a friend to try
some dual card setup and tuning doesn't work for me either (bummer, I
had a working config...)
saa7115 reg 0x1e is 0x40 so basicly the same issue. I get this with
both cards; doubt that they both are broken.
Hope to get this sorted
Found a fix quicker than I thought; don't know if it will "survive" a
cold boot but hey, I got some stuff programmed to record right now so
I'm happy for now :-)
try this:
ivtvctl -I should give something like BAD SIGNAL
with ptune-ui.pl, tune to good station.
ivtvctl -I gave in my case: Sat/Dvd
On Sat, Jan 08, 2005 at 02:47:08PM +0100, Steven wrote:
> I solved the problem comparing the output of modprobe tveeprom to that
> same tuner.h file and found out I had to use tuner type 38 for the
> Philips FQ1216ME MK3. With modprobe ivtv tuner=38 my PVR150 works great.
> Watching live-tv in m
Hi,
I am trying to install an PVR-150MCE in a box where i 've got a
PVR-350 running. The PVR-150 seems to initialise well but I am unable
to get any output from it.
When running cat /dev/video1 > test.mpg I get a 0kb file. Someone has
an idea what is going wrong?
Thanks
Peter
output (pvr350 is
Michael T. Dean schreef:
On 01/06/2005 09:47 AM, Rasmus Larsen wrote:
On Thursday 06 January 2005 08:11, Steven wrote:
tveeprom reports tuner type 4 but this is in the log :
Jan 6 08:35:35 localhost kernel: tuner: tuner type not set
Jan 6 08:35:35 localhost kernel: ivtv: Switching standard to
On Fri, Jan 07, 2005 at 10:58:21PM -0500, Michael T. Dean wrote:
> On 01/07/2005 09:15 PM, Axel Thimm wrote:
>
> >while packaging ivtv 0.3.x I found two things:
> >
> >a) the required tuner.ko modle (for PVR 150/500) will conflict with
> > v4l's tuner module. Just like for msp3400 I renamed it fo
Hello,
I'm considering buing PIXELVIEW PV-M7000 video tuner. It seems to be
quite simmilar to hauppauge 250 pvr.
Board picture is avalible here:
http://www.prolink-usa.com/image/TV-M2TV307PL+_2_1.jpg
Board specification:
http://www.prolink.pl/trade/productview/619/129/
So it is based on:
Conex
19 matches
Mail list logo
