t;
Forget the above. Input on unit #0 was set to 0 in sted of 6.
So my pvr-500 and pvr-150 still work.
Kind regards,
Henk.
---
SF.Net email is sponsored by:
Tame your development challenges with Apache's Geronimo App Server.
Download i
#1 is
still present.
unit #0 gives a beep of about 1600 herz
After unloading ivtv and cx25840 and reloading ivtv, sound gets back
again on unit #0, after I select a frequency.
It'sn not clear to me if frequency switching doesn't work after the
first load, because I can't tes
is supposed to mean 30 fps. However when I do;
mplayer /dev/video0
mplayer reports 25 fps, so does the framerate mean any thing after the
video mode (pal or ntsc) is detected?
Kind regards,
Henk.
---
SF.Net email is sponsored by:
Tame your
I have seen several listings of the available stream types,
e.g. in rec_v4l2.pl, but I can't figure out which type to use and why.
e.g. what do dvd special 1 and 2 mean? does the variable acutally do
anything? What is the stream type myth uses?
Thanks,
m
the cd, but I didn't get one with my card (pvr-150 &500). The hauppauge
page I tried only list files with newer firmware.
Henk.
---
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Fra
;d gladly buy a new motherboard/cpu combination if I knew which
combinations work as good as possible.
I understand that there can be random problems when using unstable
versions of the driver, but this kind of problem doens't se
m over the network, and try to
skip some minuts, or do some other heavy hd access over the lan.
On my asus motherborard with kt266/333 I don't seem to have this
problem, however I have not yet seriously tested this combination.
Henk,
-
G_DMAXFER 2 wait failed
Kind regards,
Henk.
---
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managi
from the noise, the sound quality positively surprized me, so I
hope I can improve the signal strength to make the radio really useful.
Thank.
Henk.
---
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2
el
solved at least that particular problem.
I put a pvr-150 in the machine that failed with the pvr-500, and that
card works nicely.
Kind regards,
Henk.
---
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Fin
On Tue, Jul 26, 2005 at 11:39:04AM -0400, Bryan Mayland wrote:
> Edward Rosinzonsky wrote:
>
> >I'm starting to tear my hair out. I've tried patching ivtv-fileops.c,
> >i've tried "ivtvctl -d /dev/video0 -q 1". The latter resulted in the
> >following error: "ioctl VIDIOC_S_AUDIO failed: Invalid
an't load because busmastering is disabled after unloading 0.3.7.
Henk,
---
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and m
On Thu, Jul 21, 2005 at 02:32:13AM +0200, Rudy Zijlstra wrote:
> With the original 0.3.7 i have mostly no sound on all 4 tuners of my
> dual PVR500. With tha 22272 patch above sound is OK on all channels.
Same question to you: any module parameters required/
tical in 0.3.6T and 0.3.7(patched),
so that part is not the problem. There are more diferences in
ivtv-fileops.c, but I don't know the effect of those differences.
Kind regards,
Henk.
---
SF.Net email is sponsored by: Discover Easy Lin
ny module options after applying this patch?
Kind regards,
Henk.
>
>
> Regards,
> Petter
>
>
> On 7/20/05, Chris Camisa <[EMAIL PROTECTED]> wrote:
> > I had a problem like yours. Your tda9887 module needs to load before
> > the tveeprom module. I fix
On Sun, Jul 10, 2005 at 04:47:36PM +0200, Michel vd Laan wrote:
> seem to make it work. I have not found consistency here (Henk seems to have
> sound without saa7127 channels with the very same pvr500 in pal-europe).
I don't know if I have the very same type of unit, since you use tune
is, I have no sound on my pvr-500 pAL card.
First loading 0.3.6X, unloading it, then loading 0.3.6T works as well.
Henk,
>
> Michel.
>
>
>
>
> ---
> This SF.Net email is sponsored by the 'Do More With Dual!'
no sound on both tuners, image OK on both tuners
Thanks! same here!! I had only tested with 0.3.5 and 0.3.6W, but after
your message tried 0.3.6T, which works great!
So now I end up using 0.3.5 for my pvr-150 and 0.3.6T for my pvr-500.
I'll try 0.3.6T on the pvr-15
n in the right place, I tried some garbage
options and received warnings.
This was tried with 0.3.6W I haven't yet tested 0.3.5.
Henk,
>
> [EMAIL PROTECTED] wrote:
>
> >Hello,
> >
> >Yesterday I wrote a messge about how capturing with my new pvr-500
> >cras
p VBI API header 0xbd0d pkts 1 buffs 6 ln 36 sz 1444
ivtv: Setup VBI start 0x002fea04 frames 6 fpi 1 lines 0x00f1
cx25840: decoder disable output
cx25840: decoder enable output
ivtv: ENC: Sleep timeout interrupted.
Thansk for any help.
Henk.
---
.3.6U and 0.3.5.
Thanks for any help.
Henk.
Jul 1 00:31:57 brankie kernel: ivtv: START INIT IVTV
Jul 1 00:31:57 brankie kernel: ivtv: version 0.3.5 () loading
Jul 1 00:31:57 brankie kernel: ivtv: Linux version: 2.6.11.11 SMP preempt K7
4KSTACKS gcc
connector from the pvr150 has a problem....
Kind regards,
Henk.
>
> On 6/29/05, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
> > On Wed, Jun 29, 2005 at 01:00:05PM -0500, Adam Forsyth wrote:
> > > I meant to say in my last message that I get that error all the time
&g
#x27;t change
anything.
How long shoud -s or -a take to complete? I've had it running for
several minutes with nothing vissible happening.
Kind regards,
Henk.
> On 6/29/05, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
> > On Wed, Jun 29, 2005 at 09:27:18AM -0500, Adam For
nly use -f and -c
and as far as I can see they haven't changed.
Kind regards,
Henk.
> On 6/29/05, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
> > Hello,
> >
> > I have a pvr-150 which identifies as shown below. It looks as if the
> > radio doesn't swi
y.
The second block of output is what happens when I enter the radio
command. I guess the problem is caused by this line:
ivtv: i2c client addr: 0x43 not found for command 27906!
Anything I can do about this?
Kind regards,
Henk.
ivtv: START INIT IVTV
t;
> # ivtvctl -I
> check SAA7115 input signal
> ioctl: VIDEO_STATUS = Sat/Dvd
>
The output on my PAL pvr-150 also says
ioctl: VIDEO_STATUS = Bad, even though I get recordings that I'm
sattisfied about.
I can't try ptune-ui because the compu
On Thu, Jun 23, 2005 at 01:02:55PM +0200, Tom van der Geer wrote:
> Henk,
>
> There you go:
>
> cx25840: Unable to open FW file '/lib/modules/HcwMakoA.ROM'.
> cx25840: Failed to load any FW image file
>
> Make sure to have this firmware file which is needed f
On Thu, Jun 23, 2005 at 01:02:55PM +0200, Tom van der Geer wrote:
> Henk,
>
> There you go:
>
> cx25840: Unable to open FW file '/lib/modules/HcwMakoA.ROM'.
> cx25840: Failed to load any FW image file
>
> Make sure to have this firmware file which is needed f
and 1074029670!
cx25840: decoder disable output
cx25840: decoder enable output
ivtv: ENC: Sleep timeout interrupted.
ivtv: ENC: EOS took 360 ms to occur.
Henk,
---
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM
tried
before 03.6P didn't capture anything.
I'l give 0.3.5B a try.
Thanks.
Henk,
---
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
infor
WinTV PVR 150, card #0
ivtv: END INIT IVTV
cx25840: decoder disable output
cx25840: decoder enable output
cx25840: decoder set norm PAL
cx25840: decoder set input (6)
cx25840: now setting Tuner input
cx25840: set audio input (0)
Kind
31 matches
Mail list logo
