with...but that is also on the way out. Thanks again.
-Original Message-
From: Thomas Mangin [mailto:[EMAIL PROTECTED]
Sent: Tuesday, June 15, 2004 8:37 AM
To: Jason Humes; [EMAIL PROTECTED]
Subject: Re: [jffnms-users] Backup of VLAN table
Jason Humes wrote:
>I've never had an
Jason Humes wrote:
I've never had any issues with restoring the vlan.dat to a different type of
switch than the one from which it was pulled. Thanks
Thank you for the information. Good to know. Still would like to see
this "in clear".
Call me paranoiac about restore not working, but I had few
27;
Subject: Re: [jffnms-users] Backup of VLAN table
Jason Humes wrote:
>All you need to do is copy that vlan.dat (not clear text) along with
>your startup-config and if you need to restore a switch, just dump
>those into the flash filesystem and reboot.
>
I guess this only works fine
Jason Humes wrote:
All you need to do is copy that vlan.dat (not clear text) along with your
startup-config and if you need to restore a switch, just dump those into the
flash filesystem and reboot.
I guess this only works fine if you restore on the same hardware after a
failure, but you could ver
deprecated
anyways.
-Original Message-
From: Thomas Mangin [mailto:[EMAIL PROTECTED]
Sent: Tuesday, June 15, 2004 7:01 AM
To: Jason Humes; Javier Szyszlican
Subject: Re: [jffnms-users] Backup of VLAN table
Jason Humes wrote:
>You can get the vlan.dat by tftp'ing to the box and pulli
You can get the vlan.dat by tftp'ing to the box and pulling the file from
the flash filesystem. I hope that helps.
-Original Message-
From: Javier Szyszlican [mailto:[EMAIL PROTECTED]
Sent: Monday, June 14, 2004 11:45 AM
Cc: [EMAIL PROTECTED]
Subject: Re: [jffnms-users] Backup of
Thomas,
Do you know a way to get that data from the switch?
Javier
Thomas Mangin wrote:
Javier,
This is really a feature request..
Could you consider adding the backup the content of the vlan database of
the cisco switches. Without it, you can not restore a failed switch to a
working state.
Regards
Javier,
This is really a feature request..
Could you consider adding the backup the content of the vlan database of
the cisco switches. Without it, you can not restore a failed switch to a
working state.
Regards,
Thomas
--
Thomas Mangin [EMAIL PROTECTED]
Technical Di
