Hello, i have a M7i with a FE-4FE-TX, and i am seeing collisions on the
interfaces. I am using two ports of the four, and both are showing the errors.
I am also seeing some FIFO errors. Are these signs of a faulty PIC or should i
not be concerned? Thoughts?
Thanks in Advance.
Physical
Hi all,
The Olive installation doc with VM ware workstation.
Thanks Best Regards
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: Tuesday, June 03, 2008 9:30 PM
To: juniper-nsp@puck.nether.net
Subject: juniper-nsp Digest, Vol 67,
On Tue, Jun 03, 2008 at 12:52:23PM -0400, Brendan Mannella wrote:
Hello, i have a M7i with a FE-4FE-TX, and i am seeing collisions on
the interfaces. I am using two ports of the four, and both are
showing the errors. I am also seeing some FIFO errors. Are these
signs of a faulty PIC or
-Original Message-
From: [EMAIL PROTECTED] [mailto:juniper-nsp-
[EMAIL PROTECTED] On Behalf Of Brendan Mannella
Sent: Tuesday, June 03, 2008 12:52 PM
To: juniper-nsp@puck.nether.net
Subject: [j-nsp] Interface Errors
Hello, i have a M7i with a FE-4FE-TX, and i am seeing collisions
On Fri, Jun 6, 2008 at 10:58 AM, I wrote:
Hi,
In BGP bestpath selection,
...
I expect the Metric2 to be equal to the IGP cost, not 1.
Since it is working on the Ciscos, I suppose there's something wrong
with my Juniper configs, could someone please tell me what It might
be?
Alex Arseniev
Your best bet is the source of most knowledge on the Internet, Google.
http://www.google.com/search?rls=enq=Olive+Juniper+VMwareie=UTF-8oe=UTF-8
Tim
On 6/4/08 1:24 AM, Munish Saini [EMAIL PROTECTED] wrote:
Hi all,
The Olive installation doc with VM ware workstation.
Thanks Best Regards
Hi,
Any feature in Juniper to measure delay, jitter and packet loss, also
integrated with SNMP, like Cisco SAA and RTTMON
So the results of jitter, delay and packet loss can be gathered/graph
with SNMP application.
tks,
Alaerte
___
juniper-nsp
http://www.juniper.net/techpubs/software/junos/junos91/swconfig-services/rpm.html
alaerte vidali wrote:
Hi,
Any feature in Juniper to measure delay, jitter and packet loss, also
integrated with SNMP, like Cisco SAA and RTTMON
So the results of jitter, delay and packet loss can be
8 matches
Mail list logo