[j-nsp] L3 incompletes

2008-06-13 Thread Bit Gossip
experts, we are experiencing a constant presence of L3 incomplete on a 1 Gige PIC. This is ~1 every 5 mins. Any idea what can be the reason? The Junos doc says This counter increments when the incoming packet fails Layer 3 (usually IPv4) checks of the header. For example, a frame with less than

Re: [j-nsp] L3 incompletes

2008-06-13 Thread Eric Van Tol
-Original Message- From: [EMAIL PROTECTED] [mailto:juniper-nsp- [EMAIL PROTECTED] On Behalf Of Paul Goyette Sent: Friday, June 13, 2008 10:12 AM To: Lakshminarayanan P; juniper-nsp@puck.nether.net Subject: Re: [j-nsp] L3 incompletes My 2 cents - The most common reason for this

Re: [j-nsp] L3 incompletes

2008-06-13 Thread Paul Goyette
No, that should result in policed discards, not L3 incompletes. This commonly shows up when the neighbor is from Brand-C and has cdp enabled. :) I'm hesitant to attempt to correct anyone with a juniper.net address, but I'm not sure this is entirely true. Discarded OSPF packets

Re: [j-nsp] L3 incompletes

2008-06-13 Thread Lakshminarayanan P
No, that should result in policed discards, not L3 incompletes. This commonly shows up when the neighbor is from Brand-C and has cdp enabled. :) Well, I have come across increase in L3 incomplete errors previously when testing with a M320 connected back to back on Ethernet to another

Re: [j-nsp] Tool to track special configuration segment

2008-06-13 Thread Jose Madrid
If I understand what you are saying it seems that rancid may be the answer you need. Check it out: http://www.shrubbery.net/rancid/ 2008/6/13 Joe Shen [EMAIL PROTECTED]: Hi, we want to monitor special E320 configuration segment to avoid inconsistence between BRASes. Searching with