BGP needs to be allowed in loopback JCL if you have one applied. Otherwise
the peer wont come up.
On Fri, Nov 30, 2012 at 5:36 PM, Ali Sumsam
ali+juniper...@eintellego.netwrote:
Hi,
There is an ACL on a Cisco router which doesn't have a statement which
allows the BGP peering IPs through the
Jinstall validates both current _AND_ rescue config.
Check if you have rescue config set and if yes then overwrite it with
current config
request system config rescue save
HTH
Thanks
Alex
- Original Message -
From: Ali Sumsam ali+juniper...@eintellego.net
To:
Jinstall validates both current _AND_ rescue config.
Check if you have rescue config set and if yes then overwrite it with
current config
request system config rescue save
HTH
Thanks
Alex
- Original Message -
From: Ali Sumsam ali+juniper...@eintellego.net
To:
Does anybody have any experience with forced LSP path selection for VPLS
circuits? Long story short, when we fire up traffic on one particular
VPLS instance, we're seeing SOME of the traffic it's carrying being
blackholed. The pattern is one of certain IP or even TCP port pairs
being blocked,
You need to use the strict keyword when installing the LSP.
Sent from my iPhone
On 30 Nov 2012, at 17:29, Richard A Steenbergen r...@e-gerbil.net wrote:
Does anybody have any experience with forced LSP path selection for VPLS
circuits? Long story short, when we fire up traffic on one
Hello,
Any luck with the strict option at the install-nexthop ?
Rgds,
Christian
Le 30/11/2012 17:41, Richard A Steenbergen a écrit :
Does anybody have any experience with forced LSP path selection for VPLS
circuits? Long story short, when we fire up traffic on one particular
VPLS instance,
Did you try gracefully restarting routing? That should keep it forwarding while
freeing route process memory
Will O'Brien
On Nov 30, 2012, at 2:57 PM, Giuliano Medalha giuli...@wztech.com.br wrote:
People,
We are doing some BGP tests using routing-instances on MX5-T-DC routers.
We have
Hi
strict is only useful in case you want to cease vpls service when all lsps
matching .*-SILVER.* are down. Default behavior (without strict keyword)
with empty(or down) install-nexthop match is to ignore term.
Since the aim is to route over single lsp why regex-lsp is used? Why not
8 matches
Mail list logo