iated. Thanks a bunch.
--Dave Peters
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
w), which juniper seems
to hide on their site. Hints?
Anyone have these same issues?
Thanks for any advice you all might have.
--Dave Peters
root> show version
Model: mx480
Junos: 19.4R3.11
JUNOS OS Kernel 64-bit [20200922.4042921_builder_stable_11]
JUNOS OS libs [20200922.40429
Hey everybody--
It's looking more likely that I have a cable issue, here, and just need to get
that replaced. I've got two dozen LC cables around here. Fat lot of good that
does me, now.
Appreciate everybody talking me down from the ledge. Have a great week.
--D
Female
to Female 50/125, OFNP, Pin 1-13 cable.
The ports don't light up or go "up," but the MPCs, MICs, and transceivers are
recognized. I'm clearly missing something. Can anyone take some pity on me,
here? As always, much appreciated.
--Dave Peters
_
erence/general/routing-engine-m-mx-t-series-support-by-chassis.html#sec-mx480-res
And trying to restart chassis-control isn't working. I'm sure I'm missing
something simple. Can anyone point me in the right direction?
Much appreciated.
--Dave Peters
_
oot>
Thanks again, Michael. I'll see if I can find anything else on the subject.
Uncle Google is not cooperating.
--Dave Peters
From: Michael Still [stillwa...@gmail.com]
Sent: Wednesday, April 19, 2017 10:27 AM
To: Dave Peters - Terab
8GB cards. I'm running this thing in an SCBE2, and everything else
checks out fine. Is there something I'm missing? Have I got a lemon?
Any and all help greatly appreciated.
Thanks much.
--Dave Peters
root> show chassis hardware models
Hardware inventory:
Item Version Part n
Thanks a bunch.
That's what I was thinking. Really appreciate the confirmation.
And all of the advice. Thanks to everyone.
--Dave Peters
From: Michael Loftis [mlof...@wgops.com]
Sent: Tuesday, April 26, 2016 2:07 PM
To: Dave Peters - Terabit Systems
Cc: ju
-negotiate
inserted the EX-SFP-1GE-SX connected to an outside 1G port, no lights, no joy.
Any help is appreciated.
Thanks much.
--Dave Peters
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
Also excellent information. I'll keep an eye on that.
Thanks a lot.
--Dave Peters
-Original Message-
From: juniper-nsp [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of
Levi Pederson
Sent: Thursday, January 21, 2016 6:06 AM
To: Tony Hawke
Cc: juniper-nsp@puck.nethe
Thanks, Tony.
I was looking at the wrong page. Very helpful, and very appreciated.
--Dave Peters
-Original Message-
From: juniper-nsp [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of
Tony Hawke
Sent: Wednesday, January 20, 2016 4:12 PM
To: juniper-nsp@puck.nether.net
Subject
rly I'm doing something wrong. Can anyone point me in the right direction?
Google is failing me (or I'm failing Google, which is probably closer to the
truth).
Thanks much.
--Dave Peters
___
juniper-nsp mailing list juniper-nsp@puck.nether.n
-chassis vc-port
fpc0:
--
{linecard:0}
root>
I think I've got a lemon, here, but as always, I really appreciate everyone's
input.
Thanks much.
--Dave Peters
-Original Message-
From: Alexandre Guimaraes [mailto:alexandre.guimar...@ascenty.com]
Sent: Friday,
ng is so stuck.
Thanks.
--Dave Peters
From: Plamen Stoev [mailto:plamen.st...@gmail.com]
Sent: Friday, November 13, 2015 6:25 AM
To: Dave Peters - Terabit Systems
Cc: juniper-nsp@puck.nether.net
Subject: Re: [j-nsp] VC on a QFX5100 won't go away
Hi Dave,
Did you already try to dele
elete the .conf files from the shell, the
commit/factory-settings/reset-vc stuff pops up all over again.
This is probably a really simple thing, but I'm not getting it. Can anyone help?
Thanks much.
--Dave Peters
___
juniper-nsp mailing list junip
r-nsp [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of
Tobias Heister
Sent: Tuesday, December 23, 2014 2:54 PM
To: juniper-nsp@puck.nether.net
Subject: Re: [j-nsp] MX480 SCB firmware issue
Hi,
Am 23.12.2014 um 23:23 schrieb Dave Peters - Terabit Systems:
> 1 alarm currently active
>
specific BIOS/firmware files in the download section of the
Juniper MX Series portion of the Juniper website.
Can anyone take pity on me and give me some pointers on how to update the
firmware and clear that error?
As always, much appreciated.
--Dave Peters
___
ies of the two units look exactly the same, from what I can
tell.
All information, as always, very much appreciated.
--Dave Peters
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
Hi all--
Looking at a pair of used EX2500s, and I've been lucky enough to have no cable
for consoling in. Anyone know where I can buy one (or a few)?
Thanks much.
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman
ne confirm
the parts in the bundles?
Thanks for any and all help.
--Dave Peters
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
Hi all--
I can't seem to find the jloader file to upload my RE on an MX480. Just not on
the Juniper site, far as I can tell. Anyone have access to the loader file?
That 11.4R7.5 domestic image isn't much good to me without the jloader. . . .
Thanks in advance.
--D
Can't seem to find a specific ceiling on this. Anyone know the max ARP entries
on an MX240?
Thanks in advance.
--Dave Peters
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
Hi all--
I've got two EX4200s where each port 0 on the 2x4SFPs doesn't work. Port 2
sends 10G traffic fine, but when I swing the same cable to port 0, it just
doesn't come up at all. I've attached the config below, if that helps. Hoping
someone here will scan it and tell me why I'm stupid.
oblem, but I haven't been able to figure out what
I'm doing wrong. Has anyone else seen this kind of error? Is there something
I'm missing?
Thanks in advance.
--Dave Peters
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https:
Hey everybody--
I got my hands on an EX-3200 PoE switch, and I don't need the PoE. Can I run
it with a 320W power, rather than the 740W (which I don't have).
I'm not seeing any errors. Does this just disable PoE, or am I looking at
other problems?
Thanks much.
We are considering deploying these for a customer's TOR, but I don't have any
experience with them.
Anybody out there have experience or comments good/bad on these? Anything I
should know going in?
Thanks a bunch.
--Dave Peters
___
j
in the chassis, I'll
lose JunOS on the flash. Is there an easy way to copy that back from
the management blade back onto a cleared CF card?
Any help would be much appreciated.
Thanks in advance.
--Dave Peters
___
juniper-nsp mailing list juniper
st missing something
very simple. Hoping one of you can talk me down from the ledge. Thanks
much. Sample output below:
--Dave Peters
Hit [Enter] to boot immediately, or space bar for command prompt.
Type '?' for a list of commands, 'help' for more detailed help.
OK boot
Hi all--
Trying to test a VC with two EX4200s running 10.4R9.2. Very simple. I
just can't get the backup (or line card) chassis to pass traffic.
Pinging the gateway out of the routing engine or master works fine.
Trying to ping through the backup/line card gives me nothing. The VC is
rec
ou can mix the VC connections, is all. Can I use both the
stacking backbone on one floor and the SFP links on another floor in the
same virtual chassis?
Thanks much.
--
Dave Peters
Technical Director
Terabit Systems
2565 3rd Street #218
San Francisco,
en this
before, and could offer a fix. Thanks much. Here's the chassis alarm:
root> show chassis alarms
2 alarms currently active
Alarm time Class Description
2010-11-24 09:33:47 UTC Major FPC 0 Fan 1 not spinning
{master:0}
Appreciate any and all help.
--
Dave Pe
31 matches
Mail list logo