Thank you all. It is installed and working ;)
Regards,
Junaid
On Wed, Dec 16, 2009 at 1:55 PM, Martin Levin martin.le...@molndal.se wrote:
Yes, It does if the SFP is Juniper original (or coded as original). This
is from 10.0 and onwards, before that DOM doesn't exist on an EX.
---
Martin
Hi,
Can I use XFP-10G-L-OC192-SR1 in my EX switch's 10GE port?
Specifically, can I use XFP-10G-L-OC192-SR1 instead of EX-SFP-10GE-LR
in my EX switch's 10GE port?
--
Regards,
Junaid
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https
Many thanks guys. It's all becoming clear to me now. Now I can finally rest
in peace :).
Thanks once again.
On Sat, Jun 13, 2009 at 4:50 PM, Junaid junaid@gmail.com wrote:
Hi, there is something that's bothering me for quite a while; can anyone
please explain what does -101 signify
supports v6, as well as the PPP dialer shipped with
Linux.
Junaid
On Wed, Feb 25, 2009 at 12:44 PM, fighter worker knowhowc...@gmail.com wrote:
Dear all
iam trying to implement IPV6 over PPPOE and i need to know if there is any
modification to the PPPOE protocol as i know PPPOE
Hi,
Try shutting down the vlan-range with something like the following statement:
(config-if)#vlan bulk-config test shutdown vlan-range 567 667
also see:
http://www.juniper.net/techpubs/software/erx/junose73/swconfig-link/html/dynamic-interfaces-bulk-config6.html
Regards,
Junaid
On Fri, Jan
for the solution. Now CE1 is also getting
Type 3 LSAs from CE2.
Regards,
Junaid
On Wed, Aug 27, 2008 at 3:12 PM, Junaid [EMAIL PROTECTED] wrote:
Hi,
I am caught up in what seems to be a Juniper Cisco interoperability
issue. I am running OSPF with customer inside VRF. Topology is
something like
here are have worked on both
platforms.)
Regards,
Junaid
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
/situation?
Regards,
Junaid
On Wed, Aug 27, 2008 at 9:04 AM, David Ball [EMAIL PROTECTED] wrote:
I used OSPF sham-links to rid myself of a seemingly similar LSA
Type 5 issue in the VRF I created for a customer, as follows. My PEs
and Ps were all T-series, while both CEs were Cisco 3750s.
http
Hi,
Check the transport addresses used by LDP on both nodes. These
addresses should be reachable via IGP or static routes over the GRE.
It is surprising that LSP is established without LDP!
Regards,
Junaid
On Mon, Aug 25, 2008 at 8:05 PM, Farhan Jaffer [EMAIL PROTECTED] wrote:
Hi,
I am
Hi,
Can you please recommend/refer me to some good books/online-resource
on IP/MPLS design? I am thinking of making an investment and buying a
few books. Will appreciate if you can recommend any titles.
Thanks.
Regards,
Junaid
___
juniper-nsp mailing
;
}
}
Any help/pointers?
Regards,
Junaid
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
share his experience of running OSPF with the
customer's multiple sites inside VRF. Any things that should be
carefully sought or avoided? My PE routers are Juniper M10i/M7i.
Thanks.
Junaid
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https
tunnel traffic over multiple
links.
Regards,
Junaid
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
is
unreachable so that a different next-hop can kick in?
Regards,
Junaid
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
on an
Ethernet sub-interface. So the interface never goes down.
Any help will be highly appreciated.
Thanks.
Regards,
Junaid
On Thu, May 22, 2008 at 7:15 PM, David Ball [EMAIL PROTECTED] wrote:
Is there a specific reason for not having made use of BGP to handle
the failover to your upstream
A little help required people :(
Regards,
Junaid
On Mon, Apr 14, 2008 at 8:28 PM, Junaid [EMAIL PROTECTED] wrote:
Hi,
I am trying to enable MPLS between ERX1440 and M10i routers. The
routers are connected via an Ethernet switch. I have three Cisco
routers on the same subnet as well
I set up a Facebook profile with my pictures, videos and events and I want to
add you as a friend so you can see it. First, you need to join Facebook! Once
you join, you can also create your own profile.
Thanks,
Junaid
Here's the link:
http://www.facebook.com/p.php?i=1011954991k
[7.3R2.7]
JUNOS Packet Forwarding Engine Support (M20/M40) [7.3R2.7]
JUNOS Routing Software Suite [7.3R2.7]
JUNOS Online Documentation [7.3R2.7]
JUNOS Crypto Software Suite [7.3R2.7]
Regards,
Junaid
On Nov 7, 2007 2:59 AM, Gaston Tejia [EMAIL PROTECTED] wrote:
in this case, given that the PE-CE
18 matches
Mail list logo