Thanks
Mark Tinka wrote:
On Tuesday 09 December 2008 19:46:44 SunnyDay wrote:
is there a way to disable that so i can only receive vpv4
routes and not ipv4?
Do you have this?
router bgp 1234
no bgp default ipv4-unicast
This turns BGP into MP-BGP (Multiprotocol BGP),
Hello I need help with one how do I configure the policy mentioned? I make a
dialup from a pc and this is what I get:
IKExx.xx.xx.xx Phase 2 msg ID 37ec7e6c: Negotiations have
failed.2008-05-19 12:16:18infoIKE85.72.37.175
Phase 2: No policy exists for the proxy ID received: local ID
Hello I need help on configuring IPSec vpn I use Shrew soft VPN client abd I
have tried extensively and don't seem to
Get it to work and get this output. I checked user credential if
something's wrong with username and password but everything seems fine.
Is maybe the clients problem I tried
Hello im to set up an ipsec vpn with 5gt using Shrew Soft VPN Client from my
pc
I have setup correctly the 5gt and during the dial I get the message:
KE85.72.37.175: XAuth login expired and was terminated for username
supportMM at 10.32.32.10.2008-05-14
16:16:49infoIKExx.xx.xx.xx:
Is there another free vpn client that I can use except netscreen remote?
-Original Message-
From: Stefan Fouant [mailto:[EMAIL PROTECTED]
Sent: Wednesday, May 14, 2008 5:34 PM
To: M.Mihailidis
Cc: Juniper-Nsp; [EMAIL PROTECTED]
Subject: Re: [j-nsp] netscreen Vpn
IIRC, XAuth has to take
Hello im trying to configure authentication for users. Im using auth user as
a method but I have a question
Isn't there a timeout for a user like webauth to relogin to have access
again? There is a timeout in the auth server (local)but even when the
username /password is shown and im not giving
Hello regarding radius attributes which one is for policy-list and which one
for access-list when you want to download these to subscribers via radius?
Thank you
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
Hello
Any one familiar with the get event command in screenos ?
I think there are some numbers for specific outputs and I havent found
anything.if someone knows them it would be great.
Thanks
___
juniper-nsp mailing list
Hello anyone know what are the minimum hardware requirements for M320 to
power up?
Thank you
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
Hello
I have a 5gt ADSL and the thing I want to do is:
I want to configure a second pppoe on Ethernet with the other modem working
as bridged.
I configured a new VR and created untrust.1 to zone test untrust which was
the pppoe which worked (it was connected)
And another interface trust.1
Thank you very much for helping me out :
- Original Message -
From: Alain Briant [EMAIL PROTECTED]
To: M.Mihailidis [EMAIL PROTECTED]; juniper-nsp@puck.nether.net
Sent: Monday, January 21, 2008 10:58 AM
Subject: Re: [j-nsp] Ospf neighborship
Hi
I told you something wrong concerning
hello
based on this output how can i monitor ppp/ip interfaces of specific
subscribers???
[EMAIL PROTECTED] GigabitEthernet 2/0/0.138:138
[EMAIL PROTECTED]GigabitEthernet 2/0/0.138:138
[EMAIL PROTECTED] GigabitEthernet 2/0/0.138:138
the thing im looking for is interim (something) to keep track of subscriber
packets or bandwidth any one have any clue??
- Original Message -
From: M.Mihailidis
To: Juniper-Nsp
Sent: Wednesday, December 05, 2007 2:57 PM
Hello
i need help on monitoring packects
Hello
i need help on monitoring packects on subscribers on an e320 can anyone
tell me how ican accomplish this?is it via aaa accounting? and which is the
commands to use?Every documention i found was not very helpful
Cheers
___
juniper-nsp
Hello all
i want to monitor on a E 320 the packets or bandwidth from subscribers and
send it to radius. i think its something to do with radius interim or i
maybe wrong or radius accounting, anyway if anyone have any ideas it would
really help me.
Hello all
Can anyone tell me what these two commands stand for? Thanks
mpls ldp egress-label non-null
mpls ldp independent-control
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
it is only possible to do it on the linux?
from the nsm itself isnt that possible?
- Original Message -
From: Eugeniu Patrascu [EMAIL PROTECTED]
To: M.Mihailidis [EMAIL PROTECTED]
Cc: Juniper-Nsp juniper-nsp@puck.nether.net
Sent: Wednesday, November 14, 2007 4:37 PM
Subject: Re: [j
Thank you very much
- Original Message -
From: Eugeniu Patrascu [EMAIL PROTECTED]
To: M.Mihailidis [EMAIL PROTECTED]
Cc: Juniper-Nsp juniper-nsp@puck.nether.net
Sent: Wednesday, November 14, 2007 5:45 PM
Subject: Re: [j-nsp] Netscreen Remote Manager
M.Mihailidis wrote:
it is only
Hello all
i get this output from a E320 can anyone tell me what the * in voice traffic
class mean in the output?
Thanks in advance
dc-bras01(config)#run show egress-queue rates full interf gig 3/0/3.17110001
trafficforwarded aggregate minimum
hello all
i have a netscreen 5gt and users in the company lan are configured with static
ip addresses.
Is there any way that i can bind their static addresses with their mac-address
so if they configure another ip they want get access?.And i dont want to do it
via dhcp.
BR
hello all
i want to tag two loopbacks with tag 100 in isis
and give the tag high priority.
i thought of this
interface loopback 7
ip address 1.1.1.1 255.255.255.255
isis tag 100
interface loopback 8
ip address 1.1.1.2 255.255.255.255
isis tag 100
route-map 1 permit
match tag 100
set
- Original Message -
From: M.Mihailidis
To: juniper-nsp@puck.nether.net
Sent: Wednesday, October 03, 2007 11:45 AM
Subject: Isis tag
hello all
i want to tag two loopbacks with tag 100 in isis
and give the tag high priority.
i thought of this
interface loopback 7
i have a e320 and i give the subscribers the virtual router through radius
return listattribute ERX-Virtual-Router-Name.I want to pass the virtual router
without using radius and i tried with the ip virtual-router * command in
the pppoe profile and didnt worked i also tried the aaa
hello guys
i have a e320 and i give the subscribers the virtual router through radius
return list attribute ERX-Virtual-Router-Name.I want to pass the virtual router
without using radius and i tried with the ip virtual-router * command in
the pppoe profile and didnt worked any ideas???
and how can i see traffic transit the router???
- Original Message -
From: RafaĆ Szarecki
To: M.Mihailidis
Cc: juniper-nsp@puck.nether.net
Sent: Wednesday, September 05, 2007 1:22 PM
Subject: Re: [j-nsp] monitor
This command monitor only traffic originated or terminated
25 matches
Mail list logo