I have a router with a 10G feed into a switch.
I have a server with 2 1G ethernets connected to the same switch.
Can I configure OSPF such that the router and server are neighbors and OSPF
will perform ECMP load balancing
across the 2 1G ports?
Thanks,
Joe
Joe McGuckin
ViaNet Communications
Ok, test setup is 2) ex2200 switched, reset back to factory defaults.
Configuring a 2 port trunked LAG between the switches results in dhcp not
working across the link. Regular web traffic seems ok.
Is there some magic command make this work?
Thanks,
Joe
Joe McGuckin
ViaNet Communications
web pages.
Any ideas?
Thanks,
Joe
Joe McGuckin
ViaNet Communications
j...@via.net
650-207-0372 cell
650-213-1302 office
650-969-2124 fax
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
My EX2200 thinks da0s1a is the backup and da0s2a is the primary.
How do I correct this?
Thanks,
Joe
Joe McGuckin
ViaNet Communications
j...@via.net
650-207-0372 cell
650-213-1302 office
650-969-2124 fax
___
juniper-nsp mailing list juniper-nsp
Anyone know what the various variables (e.g. bootsequencing, bootsuccess) do?
Thanks,
Joe
Joe McGuckin
ViaNet Communications
j...@via.net
650-207-0372 cell
650-213-1302 office
650-969-2124 fax
___
juniper-nsp mailing list juniper-nsp
In playing around with a couple of switched yesterday, I managed to wedge them
so they wouldn’t boot. I later fixed that problem.
Do Ex2200, EX3300, etc run the same image? Can I use a 3300 snapshot to recover
a 2200 that won’t boot?
Joe McGuckin
ViaNet Communications
j...@via.net
650-207
Can someone explain the difference between filter-specific and term-specific? I
want to create a filter for rate limiting and apply it to multiple physical
ports and have each interface
rate limited independently, not as an aggregate.
Thanks,
Joe
I'm looking for a small switch that can rate limit traffic in and out per port
with a granularity of 5mb or less. Typical application would be ethernet
distribution within a
building where each office gets a (possibly different) amount of bandwidth.
Can the EX2200 do this?
Thanks,
Joe
My understanding is that the EX2200 can run OSPF on 4 interfaces with the
standard software license - right?
How well does the OSPF work? Just from goofing around on the console, the
response of the switch seems a little slow - like the cpu
is a bit underpowered...
Thanks,
Joe
Joe McGuckin
Think for a second what this means about the manufacturing cost of a 10G port
if they can literally give 2 away. And then think about the profit margin
on said ports when Juniper sells them for what? 6k or 7k each?
Joe McGuckin
ViaNet Communications
j...@via.net
650-207-0372 cell
650-213-1302
Unipower
http://www.unipower-corp.com/Unipower_Telecom/Telecom_Product_Line/Telecom_Inverters/telecom_inverters.html
Joe McGuckin
ViaNet Communications
j...@via.net
650-207-0372 cell
650-213-1302 office
650-969-2124 fax
On May 17, 2010, at 10:09 AM, OnePacket - Scott wrote:
Hi Everybody
Hey Richard,
What are the differences/features of the new TRIO cards? Do they work
only with the MX80?
Joe
On May 10, 2010, at 10:25 PM, Richard A Steenbergen wrote:
On Tue, May 11, 2010 at 12:38:41PM +0800, Mark Tinka wrote:
Richard's suggestion to consider the MX80 is a good idea,
Can this switch perform ingress and egress rate limiting per interface?
QoS features?
MPLS features like VLL (e,g, EoMPLS), etc.
QinQ?
Native V6 in hardware V6 routing protocols?
Thanks,
Joe
___
juniper-nsp mailing list
Why didn't they name it 'Turbo' ?
Joe McGuckin
ViaNet Communications
j...@via.net
650-207-0372 cell
650-213-1302 office
650-969-2124 fax
On Oct 31, 2009, at 2:32 PM, Richard A Steenbergen wrote:
On Fri, Oct 30, 2009 at 05:35:45PM -0700, Judah Scott wrote:
The datasheet for the new MX 3D
to vendor lock the optics...
Joe McGuckin
ViaNet Communications
j...@via.net
650-207-0372 cell
650-213-1302 office
650-969-2124 fax
On Sep 25, 2009, at 8:00 AM, Richard A Steenbergen wrote:
On Fri, Sep 25, 2009 at 10:18:44AM -0400, Paul Stewart wrote:
Thanks to everyone for the response.
I
to not write these files?
Joe McGuckin
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
Is there a way to convert Juniper MD5 secrets to Cisco format?
Thanks,
Joe
Joe McGuckin
ViaNet Communications
[EMAIL PROTECTED]
650-207-0372 cell
650-213-1302 office
650-969-2124 fax
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https
So, what's recommended way to put the install image on a CD card under
OS X?
OS X doesn't have premade /dev entries for devices, and it deletes /
dev entries when you unmount a FS, so how do you create a /dev entry
that is attached to a CF card in a USB reader so you can use dd??
Joe
Any reason not to upgrade to the latest 8.X version?
Joe McGuckin
ViaNet Communications
[EMAIL PROTECTED]
650-207-0372 cell
650-213-1302 office
650-969-2124 fax
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net
19 matches
Mail list logo