On Mon, 23 Feb 2009, chenoi A wrote:
>> U mean the interface at provider site must be normal clear channel
>> STM1?
It can be either normal clear channel STM1 (POS) interface or a channelized
STM1 configured to act as clear-channel STM1. The provider has to configure
only one point-to-point link
..
my router will serve incremental E1 (by E1 interface) or ethernet (by
fastethernet or Ge) to my customer.
--- On Mon, 2/23/09, Berislav Todorovic wrote:
From: Berislav Todorovic
Subject: Re: [j-nsp] Question on BGP Peering/Upstream STM1-Juniper
To: "chenoi A"
Cc: j
On Mon, 23 Feb 2009, chenoi A wrote:
>> For information...iam using cSTM1... ..if my customer request for 4M
>> internet via ethernet port..then i will request from my upstream for
>> 4M internet...may i know how is the configuraton here
Well, you can try to start with:
http://www.juniper.n
ia
OSPF.
I know it's not ideal, but it'll work.
--------------
Message: 5
Date: Mon, 23 Feb 2009 23:41:56 +0800
From: Mark Tinka
Subject: Re: [j-nsp] Question on BGP Peering/Upstream STM1-Juniper
M10i
To: juniper-nsp@puck.nether.net, cheno...@yahoo.com
On Monday 23 February 2009 10:22:17 pm chenoi A wrote:
> run bgp between both router. This stm1 will be the trunk
> and our upstream initially will provide perMeg basis in
> this trunk...initally 1xE1 until the STM1 trunk full
> capasity. Interconnection is STM1 but the
> internet provided by upst
Hai...
Need some info and guideline.
I am newbies and this is the first time handling the m10i router. my compny
want to setup layer 3 network. and upstream with one provider stm1
M10i--STM1---Upstream Provider
run bgp between both router. This stm1 will be the trunk and our upstre
6 matches
Mail list logo