On 26.12.2011 16:49, Mark Tinka wrote:
On Monday, December 26, 2011 11:23:38 PM vaibhava varma
wrote:
I was wondering whether mLDP with Junos has been out of
roadmap and now ready for field deployment ?
mLDP showed up in Junos 11.2:
http://www.juniper.net/techpubs/en_US/junos11.2/topics/exam
On Tuesday, December 27, 2011 05:03:06 PM Johannes Resch
wrote:
> FWIW, we're using NG-MVPN based on mLDP with 11.2 in
> production (MX/T). Works well so far,...
Great to hear.
Are you using it for real-time Multicast, e.g., IPTv, or
non-critical Multicast?
Our target is to use mLDP for non-c
On Monday, December 26, 2011 11:23:38 PM vaibhava varma
wrote:
> I was wondering whether mLDP with Junos has been out of
> roadmap and now ready for field deployment ?
mLDP showed up in Junos 11.2:
http://www.juniper.net/techpubs/en_US/junos11.2/topics/example/mcast-
mbgp-mvpn-ldp.html
We hav
HI Mark
Thanks again for sharing your views :-)
I was wondering whether mLDP with Junos has been out of roadmap and
now ready for field deployment ?
Regards
Varma
On Mon, Dec 26, 2011 at 8:40 PM, Mark Tinka wrote:
> On Monday, December 26, 2011 10:37:12 PM vaibhava varma
> wrote:
>
>> Oh Yes w
On Monday, December 26, 2011 10:37:12 PM vaibhava varma
wrote:
> Oh Yes what I mentioned for using LDP was without RSVP-TE
> at all..I was trying to run RSVP-TE without using LDP at
> all..
Ah okay. That makes sense, then, as I assumed you were still
running LDP even after turning on RSVP for "
HI Mark
Oh Yes what I mentioned for using LDP was without RSVP-TE at all..I
was trying to run RSVP-TE without using LDP at all..
With Ivan's suggestion I was enabled to get lables for the remote PE's
Loopback,,,
Thanks much to You and Ivan for your support on getting hold of this issue..
I fina
On Monday, December 26, 2011 03:24:21 PM vaibhava varma
wrote:
> Thanks for the help so far..I tried to use
> "ldp-tunneling" under RSVP TEs from PE-P to P-PE but it
> does not works as I do not have LDP enabled anywhere to
> tunnel it via RSVP..
That's interesting, because I recall you mentione
Hi,
Try to enable LDP on the loopbacks on PE1, P1 and PE2 and you will have
FECs from PE1 to PE2 via LDP tunneled in both RSVP LSPs.
If I understand you correctly this what your trying to accomplish.
HTH
Ivan,
On Mon, Dec 26, 2011 at 09:24, vaibhava varma wrote:
> Hi Mark
>
> Thanks for the h
Hi Mark
Thanks for the help so far..I tried to use "ldp-tunneling" under RSVP
TEs from PE-P to P-PE but it does not works as I do not have LDP
enabled anywhere to tunnel it via RSVP..
My setup is as below:
CE1-PE1--RSVP-LSP1--P1--RSVP-LSP2--PE2--CE2
How can I make the traffic flow from CE1 to C
On Sunday, December 25, 2011 09:35:52 PM vaibhava varma
wrote:
> Thanks a lot for your response..I have everything working
> fine withLDP without any issues..I just wanted to deploy
> RSVP-TE for fasterfailover in the backbone..
Ah okay. Got you.
> And there I
> got stuck up with the full-mesho
HI Mark
Thanks a lot for your response..I have everything working fine withLDP
without any issues..I just wanted to deploy RSVP-TE for fasterfailover
in the backbone..And there I got stuck up with the full-meshof TE
among PEs or using Broken Static LSPs between PE-P and P-PE..
Thanks for sharing th
On Sunday, December 25, 2011 06:22:18 PM vaibhava varma
wrote:
> I am working on a requirement to enable the MPLS Backbone
> with MPLS TE in such a way that I have LSPs running from
> PE-P routers and P-PE routers to avoid full mesh of
> LSPs.
So you mean H-LSP's (RFC's 4206, 6107)
> I can not
Dear All
I am working on a requirement to enable the MPLS Backbone with MPLS TE
in such a way that I have LSPs running from PE-P routers and P-PE
routers to avoid full mesh of LSPs.
I can not make it working with RSVP as I think I need to enable LDP on
the RSVP TE Tunnel but unable to find a way
13 matches
Mail list logo