Mounir,
Try the following:
[edit]
[EMAIL PROTECTED] run show ospf neighbor instance test
Address Interface State ID
Pri Dead
10.1.8.53fe-1/0/0.0 Full
10.1.8.5312831
If you do not follow the 'show ospf neighbor' comman
Hi Team,
I'm working on multiple OSPF instance (each on its own vrf) described on th
scenario bellow :
R1, R2 (M20) and my R3(M7i) are connected on the same L2 switch (same area
0.0.0.1)
R1 and R2 already established OSPF election and can exchange their route
under OSPF, but M7i Ospf still fail
: Wednesday, February 07, 2007 2:32 PM
To: juniper-nsp@puck.nether.net
Subject: [j-nsp] L2VPN config sample!
Dears all
I'm contacting you, because, we are trying to configure an L2VPN on a JM20.
Basically the configuration is the following:
Pe2> show configuration routing-instan
ehalf Of Telmo Javier Di
Leva
Sent: Wednesday, February 07, 2007 2:32 PM
To: juniper-nsp@puck.nether.net
Subject: [j-nsp] L2VPN config sample!
Dears all
I'm contacting you, because, we are trying to configure an L2VPN on a JM20.
Basically the configuration is the following:
Pe2> show
Dears all
I'm contacting you, because, we are trying to configure an L2VPN on a JM20.
Basically the configuration is the following:
Pe2> show configuration routing-instances L2VPN
instance-type l2vpn;
interface ge-1/1/0.195;
route-distinguisher 18747:55;
vrf-target target:18747:555
5 matches
Mail list logo