On a few occasions I've used those plastic washers you get with cage nut sets
between the post and the ear on the top holes, packing the top out a few
millimeters to take out some of the sag. It can be tricky to hold the washer
in place while putting the screw through.
You could also just put
: Wednesday, March 21, 2012 7:17 AM
To: juniper-nsp@puck.nether.net
Subject: Re: [j-nsp] Rack mounting a EX4200-48PX, concerned about weight
On a few occasions I've used those plastic washers you get with cage nut sets
between the post and the ear on the top holes, packing the top out a few
millimeters
I've got a couple of new EX4200-48PX with dual 930W power supply which have
just arrived and I'm quite concerned about the weight of the units in relation
to the rack ears. It is the same ears for the EX4200/3200 family.
Has anyone racked these before, if so how much sag do you get and do you
physically, though.
HTH
Patrick
-Original Message-
From: juniper-nsp-boun...@puck.nether.net
[mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of James Baker
Sent: Tuesday, March 20, 2012 4:20 PM
To: juniper-nsp@puck.nether.net
Subject: [j-nsp] Rack mounting a EX4200-48PX, concerned
[mailto:patrick.dic...@virtualarmor.com]
Sent: Wednesday, 21 March 2012 11:26 a.m.
To: James Baker; juniper-nsp@puck.nether.net
Subject: RE: [j-nsp] Rack mounting a EX4200-48PX, concerned about weight
James-
I would suggest using the 4 post rack mounts for the EX4200. Juniper has them
on the price
...@puck.nether.net] On Behalf Of James Baker
Sent: Tuesday, March 20, 2012 5:20 PM
To: juniper-nsp@puck.nether.net
Subject: [j-nsp] Rack mounting a EX4200-48PX, concerned about weight
I've got a couple of new EX4200-48PX with dual 930W power supply which
have just arrived and I'm quite concerned about
I actually mounted one of these in an older cabinet where the cage
nuts were not the tightest fit, but (and I do not advocate this)
taking a laptop bag strap along the back of the chassis and up to
points on the back of the cabinet to act as a sling to help hold up
the back.
Four post rails would
that, however they are quite pricey
Thanks anyway
-Original Message-
From: Patrick Dickey [mailto:patrick.dic...@virtualarmor.com]
Sent: Wednesday, 21 March 2012 11:26 a.m.
To: James Baker; juniper-nsp@puck.nether.net
Subject: RE: [j-nsp] Rack mounting a EX4200-48PX, concerned about weight
8 matches
Mail list logo