Hello Bob R.
Check out the following web site..
http://rkymtn.com/
I have one myself .
Gary
KR2 / Corvair getting closer every day..
One thing to consider if you glass the boat (and perhaps even if you
don't)...round the corners of the bottom of the "boat" with a sanding
block, router with round-over bit, or palm sander before you glass it.
Then run the glass so it will follow the fuselage contour from sides to
bottom and
All;
Just downloaded the last 3 packages using freedownloadmanager - took about 2
minutes total on a 30MB baud download connection via cable: below is a link
to the non-commercial, open source download manager that will run multiple
thread downloads, allows restarts for failed file downloads and
you have a ground prob. Randy Moore
-Original Message-
From: Robert Pesak via KRnet
To: KRnet
Sent: Wed, Oct 15, 2014 5:23 pm
Subject: KR> radio
Hi everyone,
Talking radio problems, Every time I key the mike strange things happen on my
panel. The trim LED lights go all the way to
If you don't already have a deal set up, here's what I would be
interested in:
I have a set of tail-dragger gear legs, that I bought used off this
list, intending to modify them to work as trike legs.
If you (Louis) want to buy the offered gear set & ship me the trike-gear
legs that it
Hi everyone,
Talking radio problems, Every time I key the mike strange things happen on my
panel. The trim LED lights go all the way to the down to the bottom of the
scale, the ammeter shows about + 20 amps, and it caused my clock to go hay
wire. I hope this is something simple as grounding.
What kind of gear do you have for sale then Diehl tail dragger main gear?
I am interested in those
Sent from my iPhone
> On Oct 15, 2014, at 11:39 AM, Howie Shank via KRnet
> wrote:
>
>
>
>
> I want it . Sold mine . I will sell my tale drager set for the same
>
>
$500 will buy the entire gear set.
> -Original Message-
> From: KRnet [mailto:krnet-bounces at list.krnet.org] On Behalf Of Dave_A
> via KRnet
> Sent: Wednesday, October 15, 2014 9:57 AM
> To: louis lanie; KRnet
> Subject: Re: KR> FW: Landing gear parts
>
> Perhaps someone who needs
Why not just get the 1975/2002 CD from Larry ? Virg
On 10/15/2014 9:48 AM, Michael Lineback via KRnet wrote:
> Good morning,
>
> Wanted to fire off a short email on this.I just downloaded all 4 files
> and they seem to be fine.They are between 33 and 42 Meg each and on a
>
I guys
I have type 4 VW gear reduction engine, Dynamo type charging system.
I have A200 radio, at low RPM the radio is fine, High RPM cruise, I have
heaps of interference .
I have the radio suppressor's on the system everywhere, but still it is bad.
What can I do to help improve the system
One way to help decide is to take two identical sized pieces of scrap plywood.
Fill one with whatever filler and the other with the deck cloth and epoxy.
Then weigh. I covered my fuselage ply and wing/tail skins with deck cloth. I
used a heat gun or hair dryer to help soak up the resin. A
Virg wrote:
> Why not just get the 1975/2002 CD from Larry ? Virg
I'm sure if you could find Larry, people would do that. But Larry hasn't
been heard from for many years, and as I posted a while back, his house has
sold, and I've been unable to find a trace of him anywhere. If he were
I want it . Sold mine . I will sell my tale drager set for the same
--
On Wed, Oct 15, 2014 9:22 AM PDT Brad Ankerstar via KRnet wrote:
>$500 will buy the entire gear set.
>
>
>
>> -Original Message-
>> From: KRnet [mailto:krnet-bounces at list.krnet.org]
I want it . Sold mine . I will sell my tale drager set for the same
--
On Wed, Oct 15, 2014 9:22 AM PDT Brad Ankerstar via KRnet wrote:
>$500 will buy the entire gear set.
>
>
>
>> -Original Message-
>> From: KRnet [mailto:krnet-bounces at list.krnet.org]
Good morning,
Wanted to fire off a short email on this.I just downloaded all 4 files
and they seem to be fine.They are between 33 and 42 Meg each and on a
quick cursory inspection seem to be complete. I do have a fast Internet
connection at home 16Gig download average.
HTH,
Michael
At 08:01 AM 10/15/2014, you wrote:
>On the outer wing for example, the deck cloth is 50 inches wide so
>it takes maybe 1.5 yards to do one surface (2.1 oz). Add maybe 1.5
>ounces of resin per yard and that is only 14.4 ounces to seal the KR
>cloth on both outer wing panels.
>Anyone out there have an opinion on glassing the fuselage other than the 2"
>lap recommended @ fillets & turtle deck attachment or just a coat of varnish
>and paint?
>Dan Prichard
+++
Everyone has an opinion. Mine is yes, use the
A few days ago I tried to download one of the newsletter files and had
the same problem. I have issues with downloading on occasion so I
figured I would wait until I had a chance late at night with less
internet traffic. After reading about others having this problem, I went
back and tried to
Perhaps someone who needs trike gear and has tailwheel gear might buy
his legs & sell you theirs...
Depending on his price, I'd be interested (I have tailwheel gear but am
doing a trike gear bird)...
On 10/13/2014 6:35 PM, louis lanie via KRnet wrote:
> Would the main gear legs work for a tail
Hi All;
I am the fellow who bought Bob Lee's project and although I will not be making
the trip to pick it up until next spring/summer I am familiarizing myself with
it as much as possible. I wonder if anyone can tell me what the instrument to
the right of the Loran is.
Please see the
I had a terrible problem when I first put in my Ifly. Then I grounded the
Ifly directly to the battery and all was well. I know that you cannot
ground everything directly to the battery, but maybe there is something to
be said about having the ground as large as possible and as close to the
No external antenna to collect gunk. KISS (Keep It Simple Stupid)
FWIW, I don't see planning ahead and mounting antennae internally so they don't
create drag to be stupid. Perhaps your mileage and may vary. :o)
-Jeff Scott
Los Alamos, NM
> Wouldn't it work to just wash it once in a while?
22 matches
Mail list logo