KR> engine mount

2016-07-19 Thread Larry Flesner
At 07:58 AM 7/19/2016, you wrote: >I left out the angle entirely. I don't think you need it (and I've >proven it) if you attach the engine mount near the longerons...where the >load path is Mark Langford ++ I did not use the angle

KR> Florida

2016-07-19 Thread Rob Schmitt
I will be there! Thanks for hosting. Rob Schmitt > On Jul 19, 2016, at 5:05 PM, terrypam56 via KRnet > wrote: > > Plan on doing my cookout Saturday August 20th at 5 p.m. at Marion Kansas 43k > had 3 kr2 there last year terry chizek 620 381 1347 > > > Sent from my Samsung Galaxy

KR> Florida

2016-07-19 Thread terrypam56
Plan on doing my cookout Saturday August 20th at 5 p.m. at Marion Kansas 43k had 3 kr2 there last year terry chizek 620 381 1347 Sent from my Samsung Galaxy smartphone. Original message From: "brian.kraut--- via KRnet" Date: 07/05/2016 3:51 PM (GMT-06:00) To: KRnet Cc:

KR> Cylinder Heads Again

2016-07-19 Thread Mac McConnell-Wood
Hi Mark, I had high temps on my Revmaster -didn't know what all-so I fitted an adjustable outlet flap to the lower cowling, I fitted a new spring to the pressure relief valve (don't ask -a VW specialist advised me). Fitted a VW oil cooler to the top side. Had an ex RAF test pilot to do the checks

KR> Cylinder Heads Again

2016-07-19 Thread Roger Bulla
Mark Langford wrote: >I'm still looking for ideas on "what works" in various VW aircraft installations, because what I have isn't working. I took off in 95 degree temp yesterday, and after idling to the runway and a quick runup, it was at 400F as I turned crosswind, and I wasn't even at pattern

KR> Back-up profile engine mount

2016-07-19 Thread Stef den Boer
hi, To install the engine mount on the firewall I have to install according drawing a L shaped .125 thickness. On the drawing I cant find the lengt of this L profile. Do I install it over the full lengt of the upper shelf? I think it is better to install 2 L shaped profiles so you connect the

KR> Camp Scholler

2016-07-19 Thread Paul Visk
Tom and I are driving up to Oshkosh Sunday. ?Will be camping at Camp Schollet. ?Is it better to arrive earlier than later on Sunday or does it matter?? Paul Visk?Belleville IL ?618 406 4705 Sent on the new Sprint Network from my Samsung Galaxy S?4

KR> Camp Scholler

2016-07-19 Thread Gary
Early as possible is best. ?Won't run out of campsites but you could wind up way out from things Gary Wold Original message From: Paul Visk via KRnet List-Post: krnet@list.krnet.org Date: 07/19/2016 11:37 AM (GMT-06:00) To: EAA Group , KR EMAIL BOARD Cc: Paul Visk

KR> Camp Scholler

2016-07-19 Thread Dave Ferguson
Earlier. After 9:00 am the ck.in line goes down the street about 1/2 to 3/4 mi. On Jul 19, 2016 12:38 PM, "Paul Visk via KRnet" wrote: > > > Tom and I are driving up to Oshkosh Sunday. Will be camping at Camp > Schollet. Is it better to arrive earlier than later on Sunday or does it > matter?

KR> RUDDER SIZE

2016-07-19 Thread ol' weirdo
Just to say thanks for responses re rudder size. Would seen plan size to 10 percent larger seems to be consensus. Bill Weir

KR> Cylinder Heads Again

2016-07-19 Thread Roger Bulla
Has anyone tried these heads from CB Performance? They look like they have better air flow around the exhaust ports and maybe better quality control? http://www.cbperformance.com/Panchito-044-Cylinder-Heads-90-5-92-Bore-p/1672.htm Roger Bulla rbulla2 at wic.net

KR> Cylinder Heads Again

2016-07-19 Thread ml at n56ml.com
Roger Bulla wrote: > Has anyone tried these heads from CB Performance? They look like they have > better air flow around the exhaust ports and maybe better quality control?< Looks like maybe they have swapped to the "Chinese castings", which are improved over the CB 044 heads that came on

KR> Back-up profile engine mount

2016-07-19 Thread ml at n56ml.com
Stef wrote: > To install the engine mount on the firewall I have to install according > drawing > a L shaped .125 thickness. On the drawing I cant find the length of this L > profile. Do I install it over the full length of the upper shelf? I left out the angle entirely. I don't think you need

KR> KR1 project has been sold.

2016-07-19 Thread Kayak Chris
what did it finally sell for? On Mon, Jul 18, 2016 at 5:24 PM, Glen Wilcox via KRnet wrote: > > > > > ___ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to KRnet-leave at