KR Fliers and Builders
I just received my 2004 KR Gathering DVD from 'video Bob' and what a
production. I have only made the last three gatherings, but this video is
an academy award winner. This video captures the spirit and much more as to
what took place last year at the Gathering. I don't
- Original Message -
From: "Dan Heath"
Why did you choose the two piece over the
> single piece?
For a couple of reasons...to get the wider distance between tires based on
the handling reports like what Larry F reported with his 8ft separation and
it also replicates
KR netters,
After about a year layoff of working on my KR2S, I have started making
progress. Even though the past year has not seen much building, I was
"collecting" all the parts for the landing gear for my KR2S, working on a
wt file for all pieces, and collecting/starting the assembly and
Brian,
When I ordered my KR2S plans, I basically got the KR2 manual, KR2 drawings
and supplemental drawings for the KR2S where it differed from the KR2
(fuselage, wing,empenage, etc.) identified by KR-2S on the drawing.
r/Bernie
KR2S Builder
Lexington Park, MD
http://mywebpage.netscape.com/n2w6
.
> >What are the measurement for a KR2S tail ??
> >Phil Matheson
I have built my HS & elevator spars and they are 71 inches long...which are
the dimensions given in the builder's manual. There is an elevator spar
center bracket of 1/4" plywood, but nothing else for the stab spars. In the
> Can someone please tell me then ,
> What is the wing span listed in the KR2S plans, Please
>
> Phil Matheson
-
Sheet W2 of the KR2S plans shows the wing planform and from that the wing
span from tip to tip (which includes the 20" wing tip extension on each
wing) is 23 ft 5 in.
The span of
> >Right now I am building my outbd fwd spars. I don't understand
drawing
> >no. 17 where it shows a 12 1/2" piece of plywood being glued to the fwd
> face of
> >the spar. When I tapered my spar caps for the outbd spars it says not to
> >taper until 7" .
> > How is the plywood on the fwd face
KR Builders,
Last year I bought the CD with all the KR newsletters that Larry Capps had
put together. I had started building my KR2S last year and would
occasionally scan thru some of the past newsletters. I had even subscribed
to the newsletter for a couple of years (Dec 97-Feb 2000). This
Sid Wood (KR2) and I (KR2S), builders from the right coast (Maryland), will
be there ...arriving 11 Sep, departing 14 Sep. My second, Sid's first
gathering. See you all there.
r/Bernie
KR2S Builder
Lexington Park, MD
http://mywebpage.netscape.com/n2w6
- Original Message -
From: "Mark
From: "Gavin Donohoe"
> I'm soon to buy the plans for a KR2S project!! Can someone tell me how
wide the cabin is at about shoulder level from the plans?
Gavin,
The widest part of the fuselage per plans is 38 inches, but if you take the
width of the longerons on each side and subtract
From: "Ray Fuenzalida"
> As a new builder, I am trying to learn everything.
> How did you widen the fuselage? That seems to me to be one of the great
limitations of the KR2S.
Ray,
What I did is follow the recommendations that were made by other builders to
widen the
John,
I will post a copy of the one sheet of instructions I received when I got my
Grove gear and a couple of pictures of the mounting brackets on my web site.
I posted a message on the net when I got them that if you are using new wing
airfoil shapes (AS5048), you will need to install additional
John,
Couple of problems..when I went to copy the Grove drawing of the bracket,
there was a big "Proprietary Data" on the front of it and I can not copy
without permission of Grove Aircraft. However, I have posted some pictures
of the bracket on my web site (which I forgot to give on my last
>> It looks like that gear actually is mounted a few
inches inside the fuselage. Is that how it works? >>
The one page instruction sheet I received does not tell you where to mount
the bracket. I bought the two piece gear which is somewhat like mounting
the Diehl gear. If you get the one
14 matches
Mail list logo