Very good, Bob.
Bill W.
- Original Message -
From: "Bob Lee"
To: "KRnet (E-mail)"
Sent: Thursday, July 23, 2009 7:18 PM
Subject: KR> sunset
Netheads,
Just in case you think that only Langford can have a good sunset. Here's a
link to a sunset that my wife shot out of the TRUCK on the
I'd like to echo what Glenn Martin requests re someone's recording the
forum. Can't make it this year.
Bill Weir
- Original Message -
From: "Glenn Martin"
To: "KRnet"
Sent: Wednesday, July 22, 2009 7:44 AM
Subject: Re: KR> KRs at OSH
Mark Lan
If you are in Canada the place to obtain a data plate is from RAA CANADA.
You can give the office a call at 1-800-387-1028. As ever, the plate for a
Canadian plane is different from any other nation's plate.
Bill Weir
- Original Message -
From: "Larry&Sallie Flesner"
Amen! Richard.
Bill Weir
- Original Message -
From: "Richard Hasbrook"
To: "KRnet"
Sent: Sunday, June 07, 2009 12:33 PM
Subject: Re: KR> KR Gathering location, 2010
With respect for the KRNet group as a whole, I will keep this as short
as possible and NOT state
purchase
it, put a fuel tank where the front seat is and fly to the ends of the
earth. It has has a Continental.
Bill Weir
- Original Message -
From: "dustin Reves"
To: "KRNET LIST POST"
Sent: Tuesday, May 26, 2009 1:19 PM
Subject: KR> Tandem KR PT II
I
Maybe Jeanette could be a bit quicker and maybe she could arrange to take
credit card but so? The system is working better than any other group of
which I am acqainted, and this chat room gives all the updates and help
anyone could ask. Just build the plane.
Bill Weir
- Original Message
Hi Mark,
Thanks for your reply re Corvair weight. I do belong to to the KR net and
should have checked before asking. Anyway, knowing that the Corvair weighs
that much opens many doors.
Bill Weir
- Original Message -
From: "Mark Langford"
To: "KRnet"
Sent: Wedne
What weight does one assume for a Corvair engine dressed to go flying?
Thanks.
Bill Weir
There is an artice in a Contact! magazine of some years ago describing how
to calculate the force on a flap. Maybe someone can look it up.
Bill Weir
- Original Message -
From: "Paul & Karen Smith"
To: "'KRnet'"
Sent: Tuesday, April 28, 2009 3:46 AM
Hi Mark,
Give Peter Conboy, suepe...@nb.sympatico.ca, an email and ask him how he
bent the centre section of the wing of his KR.
Bill Weir
- Original Message -
From: "Mark"
To: "'KRnet'"
Sent: Thursday, April 02, 2009 9:34 PM
Subject: KR> Be
through the KRs described on the webb and see the engines being used
I wonder how many have some lead in their tails.
Bill Weir.
- Original Message -
From: "Dan Heath"
To:
Sent: Saturday, January 03, 2009 7:13 AM
Subject: KR> Widening the fuselage, Bending Longerons
If you
Thanks Mark,
Nothing left but to geet to work.
Bill Weir
- Original Message -
From: "Mark Langford"
To: "KRnet"
Sent: Friday, January 02, 2009 1:09 PM
Subject: Re: KR> raising the canopy, widening fuselage, etc
Bill Weir wrote:
> We are building a mock
Thanks Ed,
You have anwered a lot of our questions.
Bill Weir
- Original Message -
From: "Ed Janssen"
To: "KRnet"
Sent: Friday, January 02, 2009 1:35 PM
Subject: KR> Re: KR-1 motor mounts
Bill,
I've had two different KR-1s and they were both tail he
Hi Dave,
It's a KR2S and it's pretty short in the legs
Bill Weir
- Original Message -
From: "Dave Arbogast, CISSP"
To: "KRnet"
Sent: Friday, January 02, 2009 12:58 PM
Subject: Re: KR> almost check it out ride - TN
Are you building the KR2 or the KR2S
did the
wider fuselage move the cg back and he was able, [or had to] move the engine
ahead? Can we put our engine against the firewall as KR1 with the firewall
ahead? And to finish, has anyone widened the KR2S fuselage?
Bill Weir
___
Search the KRnet
We are still sorting it out and appreciating the help we are receiving. Took
another look at the poeple involve and -- Has any of the group built a wider
fuselage and will you tell "All"?
Thanks.
Bill Weir
Heard a talk from the Pointer ELT company and he suggested that an
arrangement that uses phone jacks, the kind with the little tange one pushes
to put the jack in the receptacle, is not really the way to connect the ELT
to the switch on the instrument panel.
Bill Weir
- Original Message
Thanks, Claire
- Original Message -
From:
To:
Sent: Tuesday, December 09, 2008 12:07 PM
Subject: KR> Re: KRnet Digest, Vol 350, Issue 389
See what you mean. Thanks.
Bill Weir
In a message dated 12/4/2008 11:00:58 PM Central America Standard Ti,
krnet-requ...@mylist.net writes:
H
James,
I'm near London. You, where?
Bill Weir
- Original Message -
From: "James Neely"
To:
Sent: Friday, December 05, 2008 7:39 AM
Subject: KR> Bill Weir
Is this the Bill Weir in Ontario?
If so, Hi Bill I'd like to see your project someday soon.
James Neel
Have just started KR2S and am laying out sides on table. Using the plans sheet
for the 'S is good until I come to the rear. I guess what I need is the
dimension for "N". Like, Help".
Bill Weir
20 matches
Mail list logo