Super2 web site and look in section 5 of the manual to
see some pictures of how Scott Watts did his wing.
Dave McCauley
but not totally. Why
take a chance - separate metal from carbon fiber - use a layer of
fiberglass.
Dave McCauley
>
> With carbon fiber it is important to isolate it from any metal with a
> layer of fiberglass or
I've been building on one for 4 years. Making good progress. I think Scott
Watts is getting close. I'm probably in the 2015 summer for first lfight.
Dave McCauley
-Original Message-
From: KRnet [mailto:krnet-bounces at list.krnet.org] On Behalf Of Greg Gibson
Sent: Monday
Typically I hear "experimental one two three kilo bravo" or something like
that.
Dave McCauley
-Original Message-
From: KRnet [mailto:krnet-bounces at list.krnet.org] On Behalf Of Rayner, Todd
M. via KRnet
Sent: Thursday, June 26, 2014 8:51 AM
To: KRnet at list.krnet.org
S
I have a set of plans that I no longer need. Contact me at
davesmccauley at comcast.net
Dave McCauley
-Original Message-
From: KRnet [mailto:krnet-bounces at list.krnet.org] On Behalf Of Dave Anderson
via KRnet
Sent: Sunday, November 02, 2014 10:08 AM
To: krnet at list.krnet.org
Subject
wing aileron more than the upward moving wing - the up-moving aileron goes
up 30? while to down moving aileron travels down 20?. See page 134 of Tony
Bingelis "The Sport Plane Builder" titled What to do About Adverse Yaw.
Dave McCauley
KR2S have a
picture of their nose gear mount that I can use as a reference? Can you
send it to me at <mailto:davesmccauley at comcast.net>
davesmccauley at comcast.net
The address of a website with a picture would work as well.
Thanks,
Dave McCauley
I suggest you search out a skydiving drop zone near you. The staff there
will be glad to give you expert knowledge, let you try on chutes and even
give you instructions on how to get out, get stable and land. You may
event want to try a tandem jump just to get the feeling.
Dave McCauley
Corvair engine
installed this fall and then its build the cowl and canopy. We'll see how
it goes!
Dave McCauley
-Original Message-
From: KRnet [mailto:krnet-bounces at list.krnet.org] On Behalf Of Mark Langford
via KRnet
Subject: Re: KR> status of kr super
I have a pair of O'brien wheels and axels so I'm probably going to use their
brakes. Down side is 1,200 lb max gross. So, I'd like feedback as well.
Dave McCauley
-Original Message-
From: KRnet [mailto:krnet-bounces at list.krnet.org] On Behalf Of Mark Langford
Vinyl Ester resin is also used in marine applications. With a little looking
around you may find a supplier in Florida close to you with no shipping needed.
-Original Message-
From: KRnet [mailto:krnet-bounces at list.krnet.org] On Behalf Of bjoenunley
via KRnet
Sent: Monday, November 1
I'm going to a 1 day Corvair College in Madison of Sunday, July 26 and will
be in Oshkosh for june one day - Monday, July 27. Will be at the 1PM KR
forum, hoping to meet KR builders. I'm building a KRSuper2.
Dave McCauley
I'm not camping at AirVenture but will be arriving in the area on Sunday.
Does anyone know if I can get access to the grounds? If I can, I'd like to
lookup other early arrivals and chat. I'm building a KRSuper2 but am
interested in all KRs.
Dave McCauley
I'll bring my video camera and a tripod and we'll see what happens. If
everything goes ok, I'll put it on a DVD and let you know how to get a copy.
Dave McCauley
get back in the garage.
Look at ScottÂ’s web site to see more about the plane.
Dave McCauley
uding me). It's
probably more work than a 2S but wider & longer with a little more useful
load.
Dave McCauley
Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
please see other KRnet info at http://www.krnet.org/info.html
rimer that goes on
thick enough to help smooth the glass surface? I can hardly wait to start
sanding.
Dave McCauley
now it will add
some weight but wonder if it's worth it.
Your thoughts and experience.
Dave McCauley
KR Super2
er
What makes you think Minnesotans wear underwear when they fly in the winter!
Dave McCauley
Coon Rapids, MN
___
Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please
see
nly 1
inch thick so replacing the wood KR2S box structure wouldn't be easy and
mounting the landing gear would also require much work. So, I believe you'd
be much better off building the spar per KR2 plans. If you like to learn
more about building the KR Super2 go to www.krsuper2.com
ss
is it's cheap - only thing you buy is battery acid and some aluminum wire.
You can also dye your finished parts any color you like. Down side is that
working with acid is troublesome and messy.
Dave McCauley
-Original Message-
From: krnet-boun...@mylist.net [mailto:krnet-boun...@
Sid Wood wrote:
I have a new set of Starduster plans (2 place rag & tube biplane). Since
I've started building a KR, I no long need those plans. If you know of
anyone looking for a set, I'm willing to sell mine at a reasonable price
(ACS gets $250).
Dave McCauley
e and
$650 for the plywood.
Let me know if you're interested. The material will have to be shipped by
truck - crate is 12 feet long and plwood crate if about 5 ft by 5ft.
Dave Mccauley
davesmccau...@comcast.net
. I don't know how
expensive it is and wonder how much it weighs compared to last-a-foam which
is 4 lbs per cubic foot (a 4x8 sheet of last-a-foam weighs 4 lbs).
Dave McCauley
nd outside.
What do you hope to accomplish with it during 2013?
I was hoping to finish building by fall but there are just too many tasks
and not enough time so I'm hoping for spring 2014. Meanwhile, I'll
construct the landing gear, ailerons, flaps, flight controls and motor
mount.
Dave McCauley
is no longitudinal control
and no way to prevent rolling. The KR2 and other modern designs have
washout build into the wings which obviates the need for stall strips.
Dave McCauley
___
Search the KRnet Archives at http://tugantek.com/archmailv2-kr/sea
ilbox!
Dave McCauley
I've continued to work on my KR Super 2 and am quite a long ways down the
road. One of these days I'll update my web site when I get the time.
Dave McCauley
-Original Message-
From: KRnet [mailto:krnet-boun...@list.krnet.org] On Behalf Of Mark Langford
via KRnet
Sent:
Is anybody using this device with a tablet for EFIS display?
Dave McCauley
___
Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/.
Please see LIST RULES and KRnet info at http://www.krnet.org/info.html.
see http
I'm installing a Facet electric fuel pump and want to use a Nason pressure
switch to shut the fuel off if oil pressure drops to near zero. I Need to
know the part number of the Nason switch.
Dave McCauley
___
Search the KRnet Archives at
the boost pump for backup. I'll
also have a backup battery.
-Original Message-
From: KRnet [mailto:krnet-boun...@list.krnet.org] On Behalf Of Mark Langford
via KRnet
Sent: Tuesday, July 16, 2019 12:37 PM
To: KRnet
Cc: m...@n56ml.com
Subject: Re: KR> Nason oil pressure switch
D
I'm installing a Facet electric fuel pump and want to use a Nason pressure
> switch to shut the fuel off if oil pressure drops to near zero.
> Dave McCauley
+
>I was going to respond in much the s
There are a few builders still active. I'm one of them. The designer, Scott
Watts, is absent and slows progress quite a bitas there are my design gaps.
I've finished construction and am now in the "hook-up" phase. I'd like to get
the beast ready by fall. We'll see
urs. He starred in the
TV series "Dangerous Flights. Kerry owns and operates "Skydive Twin Cities"
in Baldwin, Wisconsin. FERRY PILOT is available from Amazon as either a
Kindle ebook or as a paperback.
Dave McCauley, proud father
___
Searc
CORVAIR ENGINE FOR SALE
Rebuilt short block by Roy Sazrafinski:
. Reground crank 10/10
. New OT10 cam and gear
. New main bearings installed
. Roy's 5th bearing
. New rod bearings (.010 undersized) included
Deep-sump oil pan from Fly Corvair with new oil pickup
Corvair Engine for sale
Completely rebuilt and partially assembled; all new or rebuilt parts.
Includes:
reground crankshaft,
new OT10 camshaft and cam gear,
new valve lifters,
new rocker arms,
rebored cylinders (.060 over) with pistons and rings (already assembled),
new rod bearings,
head
37 matches
Mail list logo
