KR> Merry Christmas

the candle icon as a vendor.) Pretty cool to have someone in Israel. On 12/26/2015 06:36 AM, Dubi Gefen via KRnet wrote: > Merry Christmas for all the KR builders and flying from yours > representative in Israel. > > Dubi Gefen > Dubi_g at maanit.org.il > http://www.dubigefen.

KR> Merry Christmas

Merry Christmas for all the KR builders and flying from yours representative in Israel. Dubi Gefen Dubi_g at maanit.org.il http://www.dubigefen.50megs.com/ +972-54-4921263 -Original Message- From: KRnet [mailto:krnet-bounces at list.krnet.org] On Behalf Of Roger via KRnet Sent: Friday

KR> Glassing

Thanks, I forget to say, Happy new year. Regards Dubi Dubi_g at maanit.org.il http://www.dubigefen.50megs.com/ +972-54-4921263 This mail was sent via Mail-SeCure System.

KR> Glassing at low temp

epoxy? Now I am using PR2032 Aeropoxy Best regards Dubi Gefen <mailto:Dubi_g at maanit.org.il> Dubi_g at maanit.org.il <http://www.dubigefen.50megs.com/> http://www.dubigefen.50megs.com/ +972-54-4921263 This mail was sent via Mail-SeCure System.

KR> Interval between the bolts of the hinges belong to aileron

elong to aileron About an hour! just kidding. Better ask that question one more time! Larry H. ____ From: Dubi Gefen To: kr...@mylist.net Sent: Sun, September 5, 2010 2:23:01 PM Subject: KR> Interval between the bolts of the hinges belong to aileron Hello Kr-fo

KR> Interval between the bolts of the hinges belong to aileron

Hello Kr-forum What is the interval between the bolts which connecting the hinges to the wing in one side and the aileron in the other side? Regards Dubi Gefen KR2s 4X-OLD Builder +972-54-4921263 dub...@maanit.org.il http://www.dubigefen.50megs.com <http://www.dubigefen.50megs.

KR> Rand Robinson Engineering, no contact.

>From my experience it very complicates to get her. The most of the times I got her in about 10:00 o'clock. CA times. Dubi Gefen KR2s 4X-OLD Builder +972-54-4921263 dub...@maanit.org.il http://www.dubigefen.50megs.com -Original Message- From: krnet-boun...@my

KR> Engine selection (change a little from the previous)

engines type IO-233-LSA. It is fine but new. Somebody can write few words about this engine? It is good selection? About Corvair, I am following the Krnet forum and it is seems to me there is many problems with the crankshaft, am I right? Dubi Gefen KR2s 4X-OLD Builder +972-

KR> Engine selection

type IO-233-LSA. It is fine but new. Somebody can write few words about this engine? It is good selection? About Corvair, I am following the Krnet forum and it is seems to me there many problems with the crankshaft, am I right? Dubi Gefen KR2s 4X-OLD Builder +972-54-4921263 dub...@maan

KR> Personal e-mail - Sorry

Hello Mark I am not sure, you sent me personal letter? Dubi Gefen KR2s 4X-OLD Builder +972-54-4921263 dub...@maanit.org.il http://www.dubigefen.50megs.com -Original Message- From: krnet-bounces+dubi_g=maanit.org...@mylist.net [mailto:krnet-bounces+dubi_g=maanit.org...@mylist.net

KR> N1213W back in the air

Hello Jeff I like the proportion of your aircraft, especially of the fuselage. In your picture I see extension between the engine and the propeller. You can let me know the length between the firewall to propeller? Do you have relevant and simple drawing? Dubi Gefen KR2s 4X-OLD Builder +972-54

KR> weight of the parts like fuselage, canopy wings and so

Hell KRnet Many times I wonder if the weight of the parts like fuselage, canopy wings and so on whom I build is in correct weight. Somebody have write weigh of this parts? Dubi Gefen KR-2S Builder dub...@maanit.org.il www.dubigefen.50megs.com <http://www.dubigefen.50megs.com/>

KR> Weight of the parts like fuselage, canopy wings and so

Hell KRnet Many times I wonder if the weight of the parts like fuselage, canopy wings and so on whom I build is in correct weight. Somebody have write weigh of this parts? Dubi Gefen KR-2S Builder dub...@maanit.org.il www.dubigefen.50megs.com <http://www.dubigefen.50megs.com/>

KR> KR-2S New web

Hello KRNet! After 6 month of working on my KR2S, I made decision to create web and show my progressing on my KR. My English is not very well but I ask your forgiveness. The web is still under constructing. I invite you to give technical comments. Dubi Gefen KR-2S Builders dub

KR> Glue two pieces of polyurethane

Hello KRNet When I glue two pieces of polyurethane and I filing with sand paper I cannot get nice flat surfaces. The reason is because the glue is much more hardener comparing to the polyurethane. How can let me know how to makes this job well. Dubi Gefen KR2S Builder dub...@maanit.org.il

KR> Glue two pieces of polyurethane

What is the name of the "hot glue", do you have web of suppliers? Dubi Gefen KR2S Builder dub...@maanit.org.il www.dubigefen.50megs.com ISRAEL -Original Message- From: krnet-bounces+dubi_g=maanit.org...@mylist.net [mailto:krnet-bounces+dubi_g=maanit.org...@mylist.net] On Beh

KR>What is the name of the "hot glue", do you have web of suppliers?

Ok now I understand what you mean Hot-glue. Thanks. Dubi Gefen -Original Message- From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net] On Behalf Of Dan Heath Sent: Saturday, August 26, 2006 8:23 PM To: kr...@mylist.net Subject: KR>What is the name of the "hot glue&

KR> Material "Super-Fil"

Hello KR builders or fliers. In many picture of KR construction I see the material "Super-Fil" What is super-fil? When I use with super-fil? Where I can get this material? Regards Dubi Gefen KR-2S Builder. dub...@maanit.org.il

KR> Aft and Front Deck From plate of Divinycell foam H60.

Hi KRNet! I would like to make the "Aft Deck" and "Front Deck" From plate of Divinycell foam H60, like Vision (experimental aircraft). I am asking yours opinion. Regards Dubi Gefen KR-2S Builder dub...@maanit.org.il <mailto:dub...@maanit.co.il> ISRAEL

KR> Parts supplyers.

Hello Kr's I would like to buy canopy for KR-2S: How know which company can supply these parts. Regards Dubi Gefen

KR> Parts suppliers.

tml There are other companies that supply parts which can be used, but these are the ones recommended for the KR. If you live outside the US, you will need to have information about more than one source. Hope this helps. Frank Ross dubi gefen wrote: Hello Kr's I would like to buy canop

KR> "KR-2S" wings airfoil

Hello KRs list'! How know what the original name of the "KR-2S" wings airfoil? Dubi

KR> Amount of Epoxy/Adhesive to build the KR wings.

Hello KRNet I would like to buy all the Epoxy/Adhesive required to build the Wings (Spars, Wings tank, Foam and Covering the foam of the wings by cloth and epoxy) You can let me know, roughly the amount of each one, the Base and Hardness for the follow list: Aeropoxy, E-Z Poxy, T-88 adhesive

KR> Start build from the wings

Hello KRnet I made decision to start build the aircraft from the wings first and then continue to fuselage. Are there any builder thinking there can be problem with this process steps? Dubi Gefen.

KR> Procedure to cover glass cloth on foam.

overs with glass cloth? Waiting to confirmation or correction. Regards Dubi Gefen.

KR> picture of the side of the aircraft

Hello Scott Cable I see your aircraft with special duct and canopy and it is look nice. Could you show as picture of the side? Dubi Gefen

KR> Test

Test Dubi

KR> Wood reservation

Today, 2-May-05 I got confirmation from Israel authority to build KR-2S. I would like to make wood reservation for the Fuselage. How can let me know and recommended about the suppliers? Dubi Gefen

KR> Certificated KR-2S list by FAA

Who know, were I can get/see the certificated list of KR-2S by FAA? Regards Dubi gefen

KR> Reservation e plan of KR-2S

I would like to make reservation for the plan KR-2S How can let me know the e-mail of Rand Robinson Inc ? Regards Dubi Gefen

KR> Reservation e plan of KR-2S

Yes, I am Thank Dubi -Original Message- From: Oscar Zuniga [mailto:taildr...@hotmail.com] Sent: Thursday, February 03, 2005 4:32 PM To: kr...@mylist.net Subject: KR> Reservation e plan of KR-2S Dubi; You are Israeli? Welcome to the KRNet. Rand-Robinson has no email. The only way t

KR> Documents related to KR-2S

t; Do you have idea where I can get the document? Regards Dubi Gefen

KR> Kr withe folding wings

Hello Janssen One of the photos shows KR with folding wings. The color of the aircraft is brown. Could you let me know how the builder is? What is the e-mail of him? Regards Dubi gefen -Original Message- From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net] On Behalf Of Ed