attached fittings for the gear legs but I don't have any usable gear leg
> blanks.
>
> On Sat, Oct 14, 2023, 4:17 PM Jim Litchfield via KRnet <
> krnet@list.krnet.org> wrote:
>
>> Subject: Fixed gear attach brackets:, composite gear leg blanks:, axle
>> attach bra
rches.
Archive searches result in mostly old entries and were not helpful. Had to
access archives thru Bouyea's site.
Am I doing it wrong ???
Anyway I'm looking for the brackets and a source for the composite blanks
Any help appreciated.
Jim Litchfield
Right Coast, USA
On Sat, Oct 14,
e
benefit to others.
Thanks
Jim Litchfield
On Tue, Jun 20, 2023 at 9:31 PM Phillip Matheson via KRnet <
krnet@list.krnet.org> wrote:
> Hi all, just wondering if I could get a Ray Allen servo sent to someone in
> the states that could bring to Oshkosh for me to pick up.
> The want $178
I'll try the simpler set up as
suggested by Craig.(Thanks Craig)
Hopefully this will work out and move this project closer to completion.
Regards to all and keep building !
Jim Litchfield
East coast.
On Thu, Feb 23, 2023 at 12:48 PM Jim Litchfield via KRnet <
krnet@list.krnet.org> wrote:
cient ?
BTW I read somewhere on your site about you making the sensors to go under
the plugs. I would like to review that again but haven't had much luck
finding it.
Thanks
Jim Litchfield
--
KRnet mailing list
KRnet@list.krnet.org
https://list.krnet.org/mailman/listinfo/krnet
Subject: EGT Sensors
To install EGT sensors on a Corvair do the exhaust manifolds have to be
drilled ?
Thanks
Jim Litchfield
East Coast
On Thu, Feb 23, 2023 at 8:49 AM Flesner via KRnet
wrote:
>
> On 2/22/2023 9:31 PM, Mark Langford wrote:
>
> Fiberglass and carbon fiber are so li
und a solution for this ? How common is this problem ?
Any and all replies are appreciated.
Jim Litchfield
Right Coast (Virginia)
Are there any other measures that can be taken to help prevent this from
happening
On Wed, Dec 14, 2022 at 4:59 PM Phillip Matheson via KRnet <
krnet@list.krnet.org> w
Sent from my iPhone
> On Sep 13, 2022, at 11:12 AM, Terry Williams via KRnet
> wrote:
>
> I did get an email response from Steve G. I really appreciate that he did
> that. He said that there is no way to order from website any longer. So,
> there's my answer. I will wait for Freebird plans
Should the voltage regulator be placed on the cabin side of the firewall to
avoid the heat of the engine compartment ?
Jim Litchfield
Virginia
Sent from my iPhone
> On Aug 29, 2022, at 7:59 AM, Gerald Campbell via KRnet
> wrote:
>
>
> Hello
> I am not good with technolog
There is also Culver Props in Missouri. http://www.culverprops.com/index.php
Jim Dexter
On 7/18/2022 7:28 PM, Jeff Scott via KRnet wrote:
With the loss of most of the less expensive prop manufacturers and the
extensive lead time and expense of the other prop manufacturers, I
noted that for
I liked the MGL cause that allowed me to get rid of all my other engine
gauges. I did have a carb heat gauge in my panel, but have since removed
it. JImChuk
On Wed, Jan 12, 2022 at 12:57 PM Flesner wrote:
> On 1/12/2022 12:11 PM, Jim Chuk wrote:
> > I don't post here often, bu
If 60" is not to long of a prop, then I would think a two blade would do
just fine. 2200 doesn't need three blades to take the power it has if the
prop is 60". More blades tend to be more inefficient. And more expensive
as well
On Fri, Dec 17, 2021 at 1:31 PM Phillip Matheson <
phillipmathe.
Thanks go to Larry for his pic and to Jeff for pointing out
shots in the gatherings photos.
Idea inspiring !
Jim Litchfield of
Va Beach VA
Sent from my iPhone
-Please see LIST RULES and KRnet info at http://www.krnet.org/info.html
-Change list delivery options
e has pictures on their build sites of attachments or if anyone
could snap a few shots before their next flight I would really appreciate
seeing them.
Jim Litchfield
Virginia Beach VA
-Please see LIST RULES and KRnet info at http://www.krnet.org/info.html
-Change
Sending out a big THANKS to Larry F, Mark W and Rick J. for their posts on
seatbelts.
I ordered a set today on Amazon ! Blue to match my eyes.
Jim Litchfield
SE Virginia
BTW anybody know where I can buy, beg, borrow or steal a ready made wiring
harness for my plane :). That would sure move things
Thanks to Colin & Larry for their responses.
Both contained good info & strong points to consider.
Jim Litchfield
S.E. VA
-Please see LIST RULES and KRnet info at http://www.krnet.org/info.html
-Change list delivery options at
https://list.krnet.
very grateful because this item has stopped production
and I am losing my hair anyway so more head scratching is totally
counterproductive.
Thanks in advance
Jim Litchfield
S.E. Virginia
-Please see LIST RULES and KRnet info at http://www.krnet.org/info.html
-Change
Not meaning to hijack the thread, but I have a set of aluminum (grove?)
gear from a KR 1 that I would part with. JImChuk
On Mon, Apr 12, 2021 at 2:20 PM Jeff Scott wrote:
>
> > Sent: Monday, April 12, 2021 at 10:30 AM
> > From: "costewart23"
> > To: "KRnet"
> > Subject: KR>Composite Landing G
Around 1980 I had this KR patch put on my EAA chapter shirt. Photo attached.
Jim Dexter
Olathe, KS
On 1/14/2021 10:57 PM, Oscar Zuniga via KRnet wrote:
Some years ago, I cooked up a KRNet logo that I used to make up some polo
shirts for the Gathering. What I did was take the logo from the
different expansion rates for F/G and
plexiglass or am I overthinking this.
Thanks
Jim Litchfield
East Coast
___
Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/.
Please see LIST RULES and KRnet info at http://www.krnet.org
wrote:
> On 10/11/2020 8:32 AM, Jim Chuk via KRnet wrote:
> > Dennis Kirk and other snowmobile suppliers as well.
>
> +
>
> I didn't see where he carries any Rotax parts. Am I missing so
Well you asked for options. I think all Rotax dealers charge the same
price for parts, so if going with Rotax, it probably doesn't matter which
dealer you use. JImChuk
On Sun, Oct 11, 2020 at 8:51 AM Flesner via KRnet
wrote:
> On 10/11/2020 8:32 AM, Jim Chuk via KRnet wrote:
>
There are always aftermarket parts on ebay for way less then Rotax gets for
theirs. Dennis Kirk and other snowmobile suppliers as well. JImChuk
On Sun, Oct 11, 2020 at 7:33 AM Flesner via KRnet
wrote:
>
> Thanks to all that replied to my request. I had been to several of
> these sites but wan
Brad Payne, I may be interested in the MGL engine monitor. My email
address is avidflyer6014 at gmail. Kind of in code. Maybe if you
could send a few pics and such. JImChuk
On Mon, Jul 27, 2020 at 8:17 PM Daniel Heath via KRnet
wrote:
> I have many friends at our airport who are RV b
Don't have a KR anymore, but still a member so see all the messages. When
I rebuilt my Avid Flyer, I installed an MGL E1 engine monitor. It is a 3
1/8" gauge that gives you egt, cht, oil temp, oil pressure, volts, tach,
hobbs, and flight timer. Other things also if you want to get the probes
or
You might try https://www.mcfarlaneaviation.com/, as they specialize in
cables.
Jim Dexter
-Original Message-
From: Dr. Feng Hsu via KRnet
Sent: Monday, March 23, 2020 12:02 AM
To: KRnet
Cc: Dr. Feng Hsu
Subject: Re: KR> took a flight
Hey guys,
I am new to this group and h
krnet-ow...@list.krnet.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of KRnet digest..."
>
>
> Today's Topics:
>
>1. Re: test messagge (Flesner)
&
but that
stuff is quite pricey and as I understand it is also pretty heavy.
I will probably need a good lightweight high build primer to help smooth my
lumpy glass and of course a topcoat that produces a foot deep shine and
goes on easy (har-d-har )
Open to all input and thanks for the help
before me feel free to chime in with suggestions
and/or alternatives.
Not interested in going the .015 route because that would triple the weight.
Any help greatly appreciated.
Still building after all these years,
Jim Litchfield
right coast.
On Thu, Jul 11, 2019 at 12:00 PM wrote:
> Send K
I have two son's who are physicians.
Stay away from doctors. They will kill you.
Regards,
Jim Mahoney
From: KRnet on behalf of Mike Stirewalt via
KRnet
Sent: Thursday, May 16, 2019 3:42 PM
To: krnet@list.krnet.org
Cc: laser...@juno.com
Subject: KR
is made
by the same company that makes the fiberfrax. I am waiting for an answer as
to thicknesses that are available.
Has anyone used other substitute material ?
I am open to all suggestions.
Thanks
Keep building---
Jim Litchfield
S,E. Virginia
___
S
uild.
My email is jimaho...@hotmail.com. No reasonable offer refused. Airplane is a
t KGQQ.
Jim Mahoney
I
From: KRnet on behalf of Jim Chuk via KRnet
Sent: Monday, September 24, 2018 11:35 AM
To: KRnet
Cc: Jim Chuk
Subject: KR> KR1 VW motor mount
About a
About a year ago, I parted out a KR1 with a VW engine on it. I still have
the motor mount. The engine had a Diehl case. I tried to post pics of
this a few days back, but I guess they were to big. If anyone is
interested in it, I can email them to you. $100 plus shipping for the
motor mount. T
I didn't follow all of the conversations on this, but the guy who told me
about this insurance does not have any connection with me. He actually
lives about 200 miles from me. He was just telling me what he found and
went with. Mn doesn't require us to have insurance if we don't fly the
plane.
I don't post here very often, but still get the emails. Minnesota where I
live requires liability insurance for airplanes. The state does have a
deal set up though where if you can't get insurance or the rates are real
high, they will insure you though that state run plan. The gross weight
they
Which model servo is being used:
T2-7A or
T3-12A
The T3 has longer travel (1.2") but is the extra travel needed ???
Jim Litchfield
S.E. VA.
___
Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/.
Please see LIST RULE
How is Jack Cooper I haven’t anything about for a long time. Is he still alive?
Thank you, Jim Morehead
>
>
> ___
> Search the KRnet Archives at
> https://www.mail-archive.com/krnet@list.krnet..org/.
> Please see LIST RULES
I still have my project for sale. It is a very straight and solid boat with
all the KR fiberglass to complete the top. Fiberfrax for the firewall and
stainless steal if you want it.
Jim Ellison
Sherman, Texas
missile.mo...@hotmail.com
903-815-3231
pars, the motor
mount, and the VW engine. If anyone is interested in these parts, give me
a call or email. avidflyer6014 at gmail dot com or 218 two five
four two four zero four. Thanks, Jim Chuk
On Tue, Jun 6, 2017 at 10:46 AM, Jim Chuk wrote:
> Hi guys, I should have p
urtle deck, a couple of spars,
some plywood and 2 corvair engines. They are located in East Central MN.
If you are interested drop me a line and I will supply photos and answer any
questions I can.
Thanks
Jim
___
Search the KRnet Archive
The auction has started for the VW engine. Here is a link to it. I
checked and I can fit the motor mount into the crate. If you buy both, I
can ship them together. JIm Chuk
http://www.ebay.com/itm/292141192105?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649
On Mon, Jun 5, 2017 at 11:3
Hi all, I started the ebay bidding on my VW engine. The item # is
29214192105 It doesn't start till 8:00PM PDT this evening, so it probably
won't show up till then. Here is a link to it running the day after I
brought it home. Jim Chuk
https://www.youtube.com/watch?v=Uuh7b5VxpbA
O
le
to click on see other items to find the rest of the items fairly easy. JIm
Chuk
http://www.ebay.com/itm/292130832051?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649
On Fri, May 26, 2017 at 7:11 PM, Patrick Driscoll via KRnet <
krnet@list.krnet.org> wrote:
> Jim, Some years back
I've got to do some checking on truck shipping for the
VW motor before I list it, that's why it's not on ebay yet. Thanks, Jim
Chuk
On Wed, May 24, 2017 at 5:07 PM, Jim Chuk via KRnet
wrote:
> Hi all, I picked up a KR 1 last fall that had seen better days. Not
> wre
about 430 hrs, but have no info or any history on the plane. Any
thoughts? Jim Chuk
https://www.youtube.com/watch?v=Uuh7b5VxpbA
___
Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/.
Please see LIST RULES and KRnet in
I still need to sale my project it has a very straight and solid boat with all
the KR. fiberglass for the top. Over 6K invested will sell for 2700.lots of
spare parts!!!
Located in Sherman,TX.
Jim Ellison
missile.mo...@hotmail.com
___
Search the KRnet
I am not the seller of this airplane. I just saw the add on craigslist and
posted it to this site. If you click on the reply button in the add, you
will get contact info for the seller. JIm
On Mon, May 1, 2017 at 9:41 PM, mike nelson via KRnet
wrote:
> Do you have any pictures of the ins
I happened to see this on craigslist. Don't know anything about the plane
myself. Jim https://ventura.craigslist.org/rvs/6050019492.html
___
Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/.
Please see LIST RULE
Sorry KR net. I did not trim my massage.
Jim Ellison
Missile.mouse@hotmail.
Sent from my iPhone
> On Apr 4, 2017, at 3:07 AM, "Jim Ellison via KRnet"
> wrote:
>
>
> Lee
> If you will tex me. Off net. I have a very good project for sale. Over 6K
> invested will
Lee
If you will tex me. Off net. I have a very good project for sale. Over 6K
invested will sale for less than 1/2 of that.
Jim Ellison
missile.mo...@hotmail.com
Dallas, Texas.
Sent from my iPhone
> On Apr 3, 2017, at 10:06 PM, "Lee Jarvis via KRnet"
> wrote:
>
>
What is the date of this years kr gathering and where will it be held?
Thanks,
Jim Morehead
___
Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/.
Please see LIST RULES and KRnet info at http://www.krnet.org
I have tried to contact Dave Goodman, but since he sued me and collected, I
have not been able to contact him. I would like to contact him to see how he is
doing.
Jim Morehead
On Wednesday, February 15, 2017 12:05 PM, laser147--- via KRnet
wrote:
Send a note to Jim Morehead
Does anyone have contact info for Dave Goodman?
He built a Kr that he called Goliath. It had a blue/gray camo paint scheme.
The link in the KRNET seems to be broken.
Thanks,
Jim Litchfield
S.E. Virginia
___
Search the KRnet Archives at https
Some one was asking about some exhaust pipes a few days ago. There is a 4
into 1 set that just got posted on barnstormers. Jim Chuk
*REVMASTER R2300 EXHAUST*
<http://www.barnstormers.com/classified_1215867_Revmaster+R2300+Exhaust.html>
• *AVAILABLE FOR SALE* • Revmaster R2300 4-into-1 e
I did it once when I landed in deep snow on skis, and kind of forced it in
at to fast of a speed with the tail to high. JImChuk
On Sat, Dec 17, 2016 at 3:41 PM, John Bouyea via KRnet wrote:
> "I found a way to flip it all by my lonesome in a normal garage.?"
>
> Don, I did the same and have pho
I put a new Aeroinjector on my Sonerai last summer. VW 1835. Simple
operation, and had no problems with it so far.
Jim Dexter
-Original Message-
From: codylee.cramer via KRnet
To: krnet
Cc: codylee.cramer
Sent: Thu, Dec 15, 2016 1:42 pm
Subject: KR> Carb
Is anyone running
Aircraft are suppliers besides others. There is some Chinese steel
floating around, I wouldn't trust it myself, especially on something like
a motor mount. Jim Chuk
On Wed, Dec 7, 2016 at 5:01 PM, Randy Smith via KRnet
wrote:
> Find another supplier.
>
> On Wednesday, Decembe
Some how that got forwarded to the wrong place. Is there a way to delete
it? Thanks, Jim Chuk
On Mon, Nov 28, 2016 at 3:31 PM, Jim Chuk via KRnet
wrote:
> Hi Kevin, here is some more info I got from the guy with the crank for the
> 85 HP. He is planning to have the company mentio
him get rid of his airplane stuff.I don't know what the
dimentions should be on a crank, but I suppose you do. Anyway, here it
is. Looks promising as far as being a good crank. I don't know what you
think one is worth, but that's up to you. Jim Chuk
-- Fo
and thanks for
having me. Here is a short video of it running. Jim Chuk
https://www.youtube.com/watch?v=Uuh7b5VxpbA
Sent from my iPhone
> On Oct 30, 2016, at 6:38 PM, "Adam via KRnet"
Location and how much?!
You are correct. I was just a little..after being stopped on the ramp.
Jim Ellison
903-815-3231
Sent from my iPhone
> On Sep 24, 2016, at 12:53 PM, "Oscar Zuniga via KRnet" list.krnet.org> wrote:
>
> Jim wrote-
>
>
>> We almost took off dragging hi
I got a BFR from Jack at that MVN flyin as well.
We almost took off dragging his step stool. I knew I fail before we got off the
ground.
Jim Ellison
903-815-3231
Sherman,TX
Larry,
Did you ever revive the packet I sent to you?
Jim Ellison
903-815-3231
missile.mouse at hotmail.com
Larry
I am very sorry, I was late getting my packet in the mail and then when when I
tried to over night it I was told there was only two day service.
If all goes well you may get it Friday, Saturday at the latest. Thank you for
everything . Wish I was there!
Jim Ellison
missile.mouse at
Sent from my iPhone
> Thanks to everyone. I am going to rethink my firewall plans.
>
> No beefing up of the firewall area is required. In fact, the 3x3 angle
> is not even needed if the engine mount is properly designed to connect.
If you put a full 1/2 inch pice of 9 ply wood and then. The aluminum 3 inch
angle. Behind it. With the 5 attach points engine mount. From great planes.
What does the neters think about this compination ??
Larry ,
If I sent you a info packet about my project. Would you please put it on the
for sale table at the Gathering.
Thank you
Jim Ellison
Sherman, TX.
missile.mouse at hotmail.com
Sent from my iPhone
hod. I am sure the hand method is more time consuming but I can go
slow with confidence. The faster methods are definitely faster but the
mistakes can happen all too quickly.
If anyone can provide the link or the builders name it would be much
appreciated.
I have searched the archives with no luck
Th
I plan on showing up again this year. Thanks Terry.
Jim Dexter
-Original Message-
From: Rob Schmitt via KRnet
Sent: Tuesday, July 19, 2016 5:47 PM
To: KRnet
Cc: Rob Schmitt
Subject: Re: KR> Florida
I will be there! Thanks for hosting.
Rob Schmitt
> On Jul 19, 2016, at 5
I listed my KR project for sale a week so ago. I apologize for sending this
back on the net. I have lost the Internet address for the guy that ask for the
pictures. Again if you will respond off net at missile.mouse at hotmail.com
Thank you
Jim Ellison
Sherman,Texas
missile.mouse at
> I am going to sell my KR2 project. Very good boat, spars,wood, foam and
> fiberglass. Located in Sherman,Texas. 60 miles north of Dallas.
Thank you
Jim Ellison
Off net at
missile.mouse at hotmail.com
> ___
> Search the KRnet Arch
I also received the NOTAM booklet in the mail.
Jim Dexter
-Original Message-
From: Larry Flesner via KRnet
Sent: Tuesday, July 05, 2016 4:13 PM
To: krnet at list.krnet.org
Cc: Larry Flesner
Subject: KR> Oshkosh notam
Oshkosh fliers,
I received my Oshkosh Notam book in todays m
I ordered the NOTAM booklet the first day it was available, but have not
received it yet.
Jim
-Original Message-
From: n357cj via KRnet
Sent: Saturday, June 25, 2016 10:57 AM
To: KRnet
Cc: n357cj
Subject: Re: KR> Oshkosh?
No, I ordered about 2 weeks ago.
Joe
- Original Mess
Very nice !!
Sent from my iPhone
> On May 17, 2016, at 5:31 PM, "Larry Flesner via KRnet" list.krnet.org> wrote:
>
>
>>
>> Netters,
>>
>> If it comes through, here is the embroidery for this years Gathering
>> hats / shirts (light blue denim, button up, with pocket). Any
>> resemblance to
Very straight boat, all RR fiberglass top deck, wing spars, plans, lots of
parts. In SHERMAN, TEXAS asking 2500.
Jim Ellison
Missile.mouse at hotmail.com
> On Feb 12, 2016, at 3:27 PM, "S via KRnet" wrote:
>
> In addition to Gary's post, I saw few days ago
Can you help me with accessing the postings on the KRnet? Rand Robinson
facebook page?
Jim
James E. Sellars, B.A. (econ) CFP
Certified Financial Planner
Equity Associates Inc.
120 Queen Street
Moncton, NB, E1C 1K7
Tel; (506)856-7977
Fax; (506)859-8504
jsellars at sellarswealthmanagement.com
Congratulations I have stopped building on mine
due to my health. But I still get inspired when I hear
about someone getting it done! !!
Sent from my iPhone
> On Jan 19, 2016, at 4:33 PM, "Lawrence Ffrench via KRnet" list.krnet.org> wrote:
>
> Hi KR Team,
>
> N44774, a KR-2 retractable
I also have a KR project for sale. A very straight boat with all
fiberglass parts on top. Located in Sherman Texas. That is about 60 miles
north of Dallas Please e-mail off net.
Jim Ellison
Missile.mouse at hotmail.com
cloth would be harder to work ?
Thanks,
Jim Litchfield
S.E. Virginia
Netters,
I'm looking for Steve Glover's e-mail address and his snail mail to his
business address.?
Thanks for your help.
Jim Morehead?
Hi Rob or whoever knows - I'm planning on attending the flyin at 43K. Do
you have any details, such as when it starts?
Thanks,
Jim Dexter
-Original Message-
From: Robert7721 via KRnet
Sent: Saturday, August 08, 2015 7:12 PM
To: krnet at list.krnet.org
Cc: Robert7721
Subject: R
Dan,
?What does the registration?of $25.00 cover??? I don't ever remember seeing it
listed befor.
Jim MoreheadN522pc? is for sale!
On Thursday, July 30, 2015 9:45 AM, Dan Prichard via KRnet wrote:
>
> All,
>?
> The shirt will be a tan color with a pocket.? To quot
anopy and frame- turtedeck and cowling. Wing spars; waf; foam; fiberglass;
peel ply; lots of hardware.. Call 903-815-1913 leave message I will call you
back. I don't all ways check e-mail every day. Asking 4,000 I have lots of
stuff
not listed.
Thanks
Jim Ellison
Sherman,Texas
I waited three days & gave up- placed an order with AC
Spruce & received it today.
Sooo if you need Spraylat don't waste your time like I did. Order Disccoat
4220 from AC Spruce & you will have it in a few days.
Regards to all
Jim Litchfield
rently both are made in the UK.
Sherwin Williams supposedly is the exclusive supplier but their local
customer service people don't know anything about.
One local salesman is looking into it but seems slow to get back to me.
I have tried Wicks and AC Spruce but neither carry it.
Thanks
Jim Litchfield
any input you could give would be appreciated as well as comments
from anyone else on where to get 6" foam.
Where the heck does one get foam without paying an arm and leg for shipping
?
I am willing to drive to pickup but am having no luck finding a source.
Thanks,
Jim Litchfield
Va Beach VA
KR2S
Check out the Garmin Pilot app.
www.garmin.com
-Original Message-
From: Mark Jones via KRnet
Sent: Sunday, November 09, 2014 9:44 PM
To: KR Mail
Subject: KR> ForeFlight
I have two questions:
1) For those of you that have used ForeFlight, did your vertical speed
indicator work? Mine w
Netters,
What is the date for the McMinnville KR Gathering, I need to get it on my
calendar. What is the name of the host, and how do I get in contact with him?
Hope to see all on you there,
Jim Morehead
Cameron Park, CA
N522pc for sale
The Oshkosh YMCA made indoor camping available again this year, on the
soccer field. I expect it will be available again next year, but there is
limited space.
Jim Dexter
-Original Message-
From: Phillip Matheson via KRnet
Sent: Thursday, July 31, 2014 6:19 AM
To: KRnet
Subject: Re
e are staright( the inner
hinge member), and I used some flanged(outer -overlapped-hinge member . The
bolts keep the bushings captive. I'll try to post pics soon.
Hope this helps,
Jim
From: Dean Choitz
To: kr...@mylist.net
Cc: dscho...@yahoo.com
Sent
Hi All,
After a LONG absence, I have come back to the nest.
Jim Sporka
Near Denver, Co.
I will take the project one. 1500 if you still have it.
Jim Ellison
N816JV
> Date: Sun, 28 Oct 2012 07:24:04 +
> From: j@comcast.net
> To: kr...@mylist.net
> Subject: KR> Two KR Projects for sale priced to move quickly $3500 and $1500
>
> Hello everyone. S
ninth month, still no
knee joint but still have the infection. We sure are going to miss seeing
everyone. Please have a great time for us!
We are praying that you will have great weather and safe traveling.
Jim/Rae Morehead
Cameron Park, CA
For one that sounds great ! Maybe time for the KR4 and using the input
of the community use the lessons learned to be as state of the art as
possible
Sent from my iPhone
On Jun 1, 2012, at 10:51, Tom wrote:
>
>
> Hey Netheads, with all the talk about experimental LSA, maybe all us old
> poots
Tom,
You pose some interesting points and would like to hear some others to see
if there is an interest for us old coots too But maybe its time for a
KR3 ?
Jim Kendrick
On Wed, May 23, 2012 at 12:22 PM, Tom wrote:
>
>
>
> Jim Kendrick asked about a super Kr2 becoming an
section to the wing to increase the span 25 or 26 feet
...
So what are the thoughts of the list ?
Jim Kendrick
Jose might have to talk I am up in Gainesville
Sent from my iPhone
On May 15, 2012, at 21:40, Jose Fuentes wrote:
> I have a KR2 for sale, boat, wing skins (ribs, spars) and langing gear.
>
> Make me an offer, pick up near Tampa (between Lakeland and Tampa Florida).
>
> did some of the restorat
Dave where r u ?
Sent from my iPhone
On May 15, 2012, at 19:52, David Rayburn wrote:
> I have a KR1 project that I started before I was run over by a drunk
> in a very large pickup truck. And as you can imagine the medical went
> away as soon as they started writing prescriptions for pain
> med
http://www.wcyb.com/news/29421820/detail.html
Travis Berry, 38 years old.
-Original Message-
From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net] On Behalf
Of WxBY
Sent: Friday, October 07, 2011 1:48 PM
To: kr...@mylist.net
Subject: KR> Kentucky prang - KR Crash - please, no s
1 - 100 of 631 matches
Mail list logo
