KR>Gap between wings

2021-10-19 Thread MS
On N335KC, Ken Cottle made some long aluminum strips that anchor on the wing trailing edge.  The adjustment mechanism (to tighten the strip once in place) was found at some miscellaneous wholesale supply store - he didn't remember any more detail regarding where he found them when I asked, some

KR>Gap between wings.

2021-10-18 Thread Spongadi
Dear friends, I am interesting with instructions/photos for how to cover the gap between the center wing and the outer wing. Thanks in advance, Shahar -- Dr Tsabari Shahar This email contain confidential and/or privileged information. If you are not the intended recipient (or have received this

KR> gap between wings

2009-10-24 Thread Peter Drake
inspection plate on the underneath. Any comments Peter Drake Hereford UK - Original Message - From: "John Martindale" To: "'KRnet'" Sent: Saturday, October 24, 2009 12:44 AM Subject: RE: KR> gap between wings Hey Phil How do you do this when the bo

KR> gap between wings

2009-10-23 Thread John Martindale
[mailto:krnet-bounces+john_martindale=bigpond@mylist.net] On Behalf Of Phillip Matheson Sent: Saturday, 24 October 2009 12:04 PM To: KRnet Subject: Re: KR> gap between wings How do you do this when the bottom bolts in main and rear spar are not in alignment (as per the pl

KR> gap between wings

2009-10-23 Thread Phillip Matheson
How do you do this when the bottom bolts in main and rear spar are not in alignment (as per the plans)? - Good question Can not find anything in the plans to say not to as yet? Phil Matheson SAAA Ch. 20 http://www.saaa20.org/ VH-PKR Australia EMAIL: phillip

KR> gap between wings

2009-10-23 Thread John Martindale
6658 4767 (H) mob: 0403 432179 email: john_martind...@bigpond.com -Original Message- From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net] On Behalf Of Phillip Matheson Sent: Saturday, 24 October 2009 7:32 AM To: KRnet Subject: Re: KR> gap between wings Then make some good

KR> gap between wings

2009-10-23 Thread Phillip Matheson
Then make some good gap covers like the ones you can see at: http://krbuilder.org/WingGapCovers/index.html --- I too left extra room as Dan did. I can remove the top WAF bolts, and lower the wing tip onto the ground or something soft, then remove th

KR> gap between wings

2009-10-23 Thread Larry&Sallie Flesner
> I will be glassing the stub wings this weekend and I was > wondering if the area between the stub and the wing template gets > the same amount of foam to fill in the gap or can I put all the > gap filling foam on the wing ? >Mike Sylvester ++

KR> gap between wings

2009-10-23 Thread Dan Heath
I have a different opinion on this. Give yourself plenty of room, maybe an inch or so, and even more, from spar to spar end at the attach points, extending enough fore and aft for getting your fingers in there to attach the wings. Then make some good gap covers like the ones you can see at: http:

KR> gap between wings

2009-10-22 Thread Mark Langford
Mike Sylvester wrote: > Hey Guys, I've got a little question. I will be glassing the stub wings > this weekend and I was wondering if the area between the stub and the > wing template gets the same amount of foam to fill in the gap or can I > put all the gap filling foam on the wing ? Which i

KR> gap between wings

2009-10-22 Thread MICHAEL SYLVESTER
Hey Guys, I've got a little question. I will be glassing the stub wings this weekend and I was wondering if the area between the stub and the wing template gets the same amount of foam to fill in the gap or can I put all the gap filling foam on the wing ? Which is the easier way. I do plan on