KR>Bolt Question

2008-10-12 Thread wa7...@aol.com
Tim Boyer wrote: Does anyone have the part number for these bolts or correct size I'm turning gray trying to get this right AN6-6A for the big ones, AN3-5A for the small ones Mark Langford Tim I know what your going through. I have had to reorder bolts so many times. I sometimes think I have

KR>Bolt Question

2008-10-12 Thread Mark Langford
Lyne wrote: > Tim I know what your going through. I have had to reorder bolts so many > times. I sometimes think I have enough left over to build another KR. In length, > you are only talking about 2 or 3 threads and it would be rare to find that > two of us built the spar, web, metal and T-88 c

KR>Bolt Question

2008-10-12 Thread wa7...@aol.com
I don't know why in the heck, I was thinking he meant the bolts through the WAFs. Lynn

KR>Bolt question

2008-10-12 Thread roger mitchell
side the fittings. These can be found at Aircraft Spruce ,their catalog is free when you order and the info is on page 74 or somewhere close to that - Original Message - From: Mark Langford To: KR builders and pilots Sent: Monday, October 20, 2003 8:42 PM Subject: Re: KR

KR>Bolt question

2008-10-12 Thread larry flesner
>I can get the length right I have made 3 different orders thinking I have the >right length only to find out the grip is to long and there's not enough >thread to tighten them up Does anyone have the part number for these bolts or >correct size I'm turning gray trying to get this right >Tim +++

KR>Bolt question

2008-10-12 Thread Mark Langford
> Mark, a ,an6-6a is a 3/8'sx3/16th grip length, undrilled, you probably need a an6-7a with a couple washers which is 3/8 dia. x 5/16 grip length undrilled . for the aft spar bolts an3-6 with washers , 3/16 dia x 3/8 grip length you should insure that none of the threads are in side the

KR>Bolt question

2008-10-12 Thread timboy...@wmconnect.com
With the aid of my youngest son I lost the bolts to my wing attachments were the out board wing bolts to the wing stubs I use 4 bolts for the forward and aft attachments I know the forward attachments use AN6 and the Aft use AN3 but I can get the length right I have made 3 different orders thin

KR>Bolt question

2008-10-12 Thread Mark Langford
Tim Boyer wrote: > Does anyone have the part number for these bolts or > correct size I'm turning gray trying to get this right AN6-6A for the big ones, AN3-5A for the small ones Mark Langford, Huntsville, AL N56ML "at" hiwaay.net see KR2S project at http://home.hiwaay.net/~langford