On 11/24/06 18:05, Torsten Luettgert wrote:
I have a problem I thought was simple first, but now I'm stuck.
In a nutshell, it's about redundant uplinks at an outside location.
Crude ASCII-Art follows:
It has been experience that things that seem simple seldom are. :s
Internet
You might want to look into
MasterShaper. It's
a full tc/ip bandwidth shaper. The author of it is Unki. He's done
the GUI in php, and uses some perl scripts to run the actual scripts on
the system. He's currently working on a newer version, and I
think it's supposed to support multiple wans.
Hi Alan,
> can anyone teach me what software to use to build a own web based GUI HTB
software in Fedoracore ( Linux based) ? Thanks
That really is a very open question to be asking. There are so many
different programming languages that can work with a web server 2 that
spring to mind are
Hello,
You will also need to install the dhcp server to be able to assign IP
addresses to other.
-nik
- Original Message -
From: "Seye Omotoso" <[EMAIL PROTECTED]>
To:
Sent: Thursday, November 23, 2006 7:50 PM
Subject: [LARTC] Linux DHPC
Dear sir,
I am trying to install Linux ser
drew einhorn wrote:
RTFM time. The htb section of http://lartc.org/howto/index.html is easier
reading than the cbq section. And the howto claims htb is better anyway.
Let's focus on the htb version of wondershaper.
Yes HTB/HFSC should br better for slow links, unfortunatly wondershaper
is f
> So I take it that you were you able to get PPTP / PopTop working the way
you wanted with multiple concurrent PPTP connections?
Yup!
___
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
I had problems with 2.6.19 kernel, appears to be some "binaries" problems
about iptables and kernel modules, then I pass to try the 2.6.18.3 kernel
to tests some things.
When I put -j ROUTE into -t mangle table and PREROUTING chain, I have no
problems, but when I try -j ROUTE into POSTROUTING chai
Hi there,
I was wondering if it's possible to use PSCHED_CPU (cpu cycle counter
as clock source for QoS). Normally kernel menuconfig forbids it due
to lack of synchronization of counters on different cpu, but:
http://uwsg.iu.edu/hypermail/linux/kernel/9902.0/0053.html
and quoting interesting pa
Hi everybody.
I would like to know how incoming ipsec packets (from
eth0 for example) interact with ifb device.
For example: I want to redirect all incoming packets
from eth0 to ifb0 for shaping. What happens to esp
and the relative clear packets? By default both are
seeing on the incoming device.
Hi list,
I have a problem I thought was simple first, but now I'm stuck.
In a nutshell, it's about redundant uplinks at an outside location.
Crude ASCII-Art follows:
Internet
||
++
| cisco with |
| uplinks|
++
Покотиленко Костик wrote:
I don't think so. You should (need) use either -j MASQUERADE or -j SNAT.
MASQUERADE is almost the same with SNAT, it more convient for NAT'ing on
ppp interfaces where there are different IP on each connect, that's way
it doesn't have --to-source option (it takes the addr
Hi,
I have many example of HTB GUI . All is already well developed, which
discussed in this link.
However,
can anyone teach me what software to use to build a own web based GUI
HTB software in Fedoracore ( Linux based) ? Thanks
Regards
Alan
Hi,
I'd like to account the data going out to an interface after shaping
and policing. At the moment, I'm using ipt_ACCOUNT for per-IP
accounting, but it counts packets regardless if they are dropped or
not. Using tc counters directly would force me to install one tc rule
per IP which I'd rather a
I'd like to initially assign all http flows to a interactive priority queue.
But if the cumulative amount of traffic exceeds a threshold, I'd like
to reassign it to a low priority bulk queue. Say someone is doing an
http download of a huge .iso.
Is this possible?
--
Drew Einhorn
___
Dear sir,
I am trying to install Linux server using DHCP, I have downloaded the DHCP file
and installed. etho is the LAN point giving the Linux server connection to
Internet and I want to configure eth1 to give DHCP to the clients.
With the instruction I got from the Internet, I have to copy co
hi,
Is there a way to calculate Gred parameters, given a
desired delay (e.g 100ms)?
Thanx
Ntanzi
Do you Yahoo!?
Everyone is raving about the all-new Yahoo! Mail beta.
http://new.mail.yahoo.com
___
Hi,
I have many example of HTB GUI . All is already well developed, which
discussed in this link.
However, can anyone teach me what software to use to build a own web based GUI
HTB software in Fedoracore ( Linux based) ? Thanks
Regards
Alan
__
Philipp Leusmann wrote:
Hi Andy,
I made the dumpfile and will send it to you in a separate private email. I
cannot see anything suspicious, but maybe I am not looking for the right
thing.
Did you get my offlist reply about that?
Same goes for netstat -s | grep retrans : The count does not ri
Hi everybody.
I would like to know how incoming ipsec packets (from
eth0 for example) interact with ifb device.
For example: I want to redirect all incoming packets
from eth0 to ifb0 for shaping. What happens to esp
and the relative clear packets? By default both are
seeing on the incoming device.
Hi everybody.
I'm receiving this error message:
Action 4 device ifb0 ifindex 7
when I issue this command:
tc filter add dev eth1 parent : protocol ip prio 1 u32 \
match u32 0 0 action mirred egress redirect dev ifb0
I'm using linux 2.6.19-rc6 with tc version ss061002
Hints?
_
Rangi Biddle wrote:
This is an update for anyone that has been attempting to get a PPTP VPN
working using PopTop with more than one simultaneous connection from an
external source to a PPTP VPN behind a router that is NATing connections
through. I assume that whoever is setting this up has som
21 matches
Mail list logo
