) even
though they are enter using the other wan.
I solved it marking packets in input from the dmz iface and force to use
another gateway (iproute2), but in this way I don't export ftp service
on default wan.
how I can setup routing to export ftp service on both iface?
Thanks in advance,
Fabio
at all)
Thanks a lot for the time you took reading this.
--
Fabio Kurgan Muzzi
___
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
hi!
I can't answer to your question but I have another question on it.
Why do you write I know that tcng is old ?
I'm studying tcng, I'm loosing my time?
Is there a better tool?
Thanks,
Fabio
On Friday 31 March 2006 01:11, Larry Brigman wrote:
I know that tcng is old but I have a question
with ssh
(interactive), priority is correctly applied.
is there a way to configure qdisc prio so that all traffic generated by a
ws has a fixed priority (not depending on tos, protocol used,...) ?
Very thanks,
Fabio
___
LARTC mailing list
LARTC
hi to all,
I'm studying traffic shaping using kernel 2.6.8 (debian sarge).
well, I have this problem: priority doesn't work.
I try with:
- qdisc prio:
tc qdisc add dev eth1 root handle 12: prio bands 3
tc qdisc add dev eth1 parent 12:1 handle 13: tbf rate 10Mbit buffer
1600 limit
packets in a time unit) is the
same for the 3 queue.
someone knows if kernel 2.6 manage correctly priority or it needs a patch?
Thanks in advance,
Fabio Marcone
___
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo
: quantum of class is big. Consider r2q
change
Thanks to all,
Fabio
--
Dott. Fabio Marcone
2T srl
Telefono +39 - 0871- 540154
Fax+39 - 0871- 571594
Email [EMAIL PROTECTED]
Indirizzo
another howto about fault tolerance using a different
method? (that solve my problem)
I know bondig method but I can't use in my scenario because I use a linux
machine connected to more than one modem adsl.
I'm using debian sarge with kernel 2.6.
Thanks in advance,
Fabio
--
Dott. Fabio Marcone
.
best regards
--
---
Fabio S. Silva
[EMAIL PROTECTED]
___
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
quot;
thks
Fabio
Martin A. Brown a crit:
Fabio,
I use a short snippet of shell to do it:
# ip rule show | grep -Ev '^(0|3276(6|7)):' \
| while read PRIO RULE ; do \
ip rule del prio ${PRIO%:} $RULE
done
I'm not aware of a more elegant way to do this. Anybody else
Dear All
Do you know if its possible to reset the rule with a single command or
if I must delete manually all the rule ?
thanks
Fabien
___
LARTC mailing list / [EMAIL PROTECTED]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
11 matches
Mail list logo